Model: 23HS30-2904S-MG50
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 50:1 and the Max. backlash is 50 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$75.44
Model: 23HS30-2904S-MG20
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 20:1 and the Max. backlash is 50 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$75.44
Model: ESS23-10
Electrical Specifications
Manufacturer Part Number: ESS23-10
Holding Torque: 1.2Nm(169.93oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differe..
A$75.36
Model: 11HS12-0704S-EGS5
This Nema 11 stepper motor comes with a holding torque of 0.07Nm(9.91oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$75.15
Model: 11HS12-0704S-EGS10
This Nema 11 stepper motor comes with a holding torque of 0.07Nm(9.91oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$75.15
Model: DM556PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Model: DM420PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–2.0A and an operating voltage of 24–50VDC, making it ideal for Nema 11, 14, 17 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Model: DM860IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0.1–6.0A and an operating voltage of 24–110VDC, making it ideal for Nema 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance at co..
A$74.82
Hot
Model: ISD04
The ISD04 is a parallel port control series of miniature high performance stepper motor drivers.Its biggest feature is its small size and strong driving ability.Its thickness is less than 14mm.They can be directly mounted onto NEMA 17, 23 series stepper motors with the corresponding flange.ISD04 can..
A$74.70
Hot
Model: ISC04
The ISC04 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC04, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC04 can provide 0 - 4..
A$74.70
Model: 1-CL42T-S01-V41
This CNC kit includes:
1 x 17HS08-1004D-E1K: Nema 17 Closed Loop Stepper Motor 14Ncm(19.83oz.in) with Encoder 1000PPR(4000CPR)
1 x CL42T-V41: Closed Loop Stepper Driver V4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
1 x CABLE-PC-1: RS232 Debugging Cable
Motor Specification
Manufa..
A$74.62
Hot
Model: CL86T-V41
This CL86T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive..
A$74.10
Model: 17HS16-2004D-B025
Motor Specification
Manufacturer Part Number: 17HS16-2004D-B025
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.45Nm(63.74oz.in)
Rated Current/phase: 2.0A
Voltage: 2.20V
Phase Resistance: 1.1ohms
Inductance: 2.60mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 42 ..
A$74.08
Model: 17HM19-1684D-B025
Motor Specification
Manufacturer Part Number: 17HM19-1684D-B025
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 0.44Nm(62.32oz.in)
Rated Current/phase: 1.68A
Voltage: 2.80V
Phase Resistance: 1.65ohms
Inductance: 4.10mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 4..
A$74.08
Brand: Leadshine
Model: DM542
The DM542 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$73.97
Hot
Model: 34HS38-3008S
This nema 34 cnc stepper motor with size 86x86x98mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish.
It's houlding torque reach 5Nm(708oz.in) with unipolar connection and 7.07Nm(1001oz.in) with bipolar conne..
A$72.94
Model: 34HS39-6004D-E1K-1M5
This is a Nema 34 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 6.0A, a holding torque of 6.50Nm(920.48oz.in) and 1500mm long cables. Compared to open loop stepper motors, it offers higher precision, higher torque, lower motor heating, lower power consumption..
A$72.61
Model: 24HP39-5004S
Electrical Specification
Manufacturer Part Number: 24HP39-5004S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 3.5Nm(495.74oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.48ohms± 10%
Inductance: 1.85mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
F..
A$72.26
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
A$71.81
Model: 34HS45-6004S
This NEMA 34 stepper motor features a 1.8-degree step angle, a holding torque of 8.2Nm(849.84oz.in), and draws 6.0A per phase. It comes equipped with a 37mm keyway shaft and 500mm cables.
This motor offers a combination of high torque and low inertia. Built for durability and reliable performance..
A$71.49
Model: 14HS20-1504D-E22-300
Motor Specification
Manufacturer Part Number: 14HS20-1504D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.40Nm(56.64oz.in)
Rated Current/phase: 1.50A
Voltage: 4.20V
Phase Resistance: 2.80ohms
Inductance: 3.80mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Si..
A$70.45
Model: ESS17-07
Electrical Specifications
Manufacturer Part Number: ESS17-07
Holding Torque: 0.6Nm(85oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differentia..
A$70.45
Hot
Model: 23IP65-12
This P series Nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
M..
A$69.97
Model: 23HS30-2804D-B200
Motor Specification
Manufacturer Part Number: 23HS30-2804D-B200
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.9Nm(269oz.in)
Rated Current/phase: 2.8A
Voltage: 3.2V
Phase Resistance: 1.13ohms
Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 57 x 5..
A$69.76
Model: 17HS15-1684S-SG10
Electrical Specification
Manufacturer Part Number: 17HS15-1684S-SG10
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 36Ncm(51oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.65ohms
Inductance: 3.2mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Gearbox Specificatio..
A$68.88
Model: 23HS22-2904S-MG50
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 50:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$68.62
Model: 23HS22-2904S-MG20
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 20:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$68.62
Model: 8HS12-0506S-PG90
This unipolar Nema 8 stepper motor with 30mm body and 0.5A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS12-0506S-PG9..
A$68.51
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Hot
Model: 8HS15-0604S-PG64
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG64
Motor Type:..
A$68.51
Hot
Model: 8HS15-0604S-PG5
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 4.75:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG5
Motor Type..
A$68.51
Hot
Model: 8HS15-0604S-PG19
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG19
Motor Typ..
A$68.51
Model: 8HS11-0204S-PG90
Electrical Specification
Manufacturer Part Number: 8HS11-0204S-PG90
Motor Type: Bipolar Stepper
Step Angle: 0.02 deg
Holding Torque without Gearbox: 1.4Ncm(1.98oz.in)
Rated Current/phase: 0.2A
Phase Resistance: 24ohms
Inductance: 8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Gearbo..
A$68.51
Model: 3-23HE30-2804S
Package includes: 3 x 23HE30-2804S
Electrical Specification
Manufacturer Part Number: 23HE30-2804S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 2.0Nm(283.22oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.17ohms± 10%
Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$67.63
Model: 11HS12-0674D-E22-300
Motor Specification
Manufacturer Part Number: 11HS12-0674D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.07Nm(9.91oz.in)
Rated Current/phase: 0.67A
Voltage: 3.75V
Phase Resistance: 5.60ohms
Inductance: 4.00mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Siz..
A$67.31
Model: 17HS11-0704S-SG50
This Nema 17 stepper motor with 28mm body and 0.7A rated current, integrated a 28.5mm square spur gearbox of 50:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS11-0704S-SG50
..
A$67.25
Model: ESS17-04
Electrical Specifications
Manufacturer Part Number: ESS17-04
Holding Torque: 0.48Nm(68oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differenti..
A$67.17
Model: 1-DM542Y-S19
This CNC kit includes:
1 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
1 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
1 x LRS-150-36: 154.8W 36VDC 4.3A 115/230VAC Enclosed Switching Power Supply
..
A$67.06
Hot
Model: 5-17HS19-2004S1
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Model: 34HS31-6004D-E1000
Electrical Specification
Manufacturer Part Number: 34HS31-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.3Nm(608.93oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.3ohms± 10%
Inductance: 2.1mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifica..
A$66.03
Model: 23HS30-5004D-B280
This is a Nema 23 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 2.0Nm(283.22oz.in), rated current of 5.0A and 116.5mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure t..
A$65.44
Hot
Model: 23E1K-20
Electrical Specification
Manufacturer Part Number: 23E1K-20
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 2Nm(283.22oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.4ohms
Inductance: 1.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: 5..
A$65.26
Model: 23HS30-2904S-MG5
This Nema 23 stepper motor is equipped with MG series high precision gearbox. The gear ratio is 5:1 and the max. backlash is 30arcmin. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the motor or gear..
A$64.08
Model: 23HS30-2904S-MG10
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 10:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$64.08
Model: 14HS20-1504S-PG5
This Nema 14 stepper motor with 52mm body and 1.5A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS20-1504S-PG5
Motor Ty..
A$63.98
Model: 14HS20-1504S-PG14
This Nema 14 stepper motor with 52mm body and 1.5A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS20-1504S-PG14
Mo..
A$63.98
Model: 14HS20-1504D-PG14
This Nema 14 stepper motor with 52mm body and 1.50A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS20-1504D-PG14
..
A$63.98
Model: 14HS20-1504D-PG4
This Nema 14 stepper motor with 52mm body and 1.5A rated current, integrated a planetary gearbox of 3.71:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS20-1504D-PG4
Motor ..
A$63.98
Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Elect..
A$63.66
Model: 5-17HS15-1504S-X1
Package includes: 5 x 17HS15-1504S-X1
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 45Ncm(63.74oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$63.63
Hot
Model: CL86Y
This Y Series closed loop stepper driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than t..
A$63.58
Model: 11HS20-0674D-E22-300
Motor Specification
Manufacturer Part Number: 11HS20-0674D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.12Nm(16.99oz.in)
Rated Current/phase: 0.67A
Voltage: 6.20V
Phase Resistance: 9.20ohms
Inductance: 5.70mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Si..
A$62.62
Model: 23HS30-2504D-E1000-C1
This is a Nema 23 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 2.5A, a 21mm shaft length, and a holding torque of 2.0Nm(283.22oz.in). Compared to open loop stepper motors, it offers higher precision, higher torque, lower motor heating, lower power consumptio..
A$62.35
Hot
Model: DM860T
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter au..
A$61.98
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Model: 8HS11-0204D-PG90
This Nema 8 stepper motor with 38mm body and 0.2A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS11-0204D-PG90
Moto..
A$61.81
Hot
Model: 23HS45-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 23HS45-4204D
..
A$60.59
Model: 34HS31-6004S1
Electrical Specification
Manufacturer Part Number: 34HS31-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 4.8Nm(679.74oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.48ohms± 10%
Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$60.02
Model: 1-DM556T-23HS45
This CNC kit included:
1 x DM556T: Digital Stepper Drive 1.8~5.6A 20-50VDC
1 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Motor Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bipolar Stepper
Step Angle: 1...
A$59.74
Used – 99% New
-10 %
Model: 23HS40-5004D-E1000-USED
This is a Nema 23 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 5.0A and a holding torque of 3.00Nm(424.83oz.in). Compared to open loop stepper motors, it offers higher precision, higher torque, lower motor heating, lower power consumption and better response..
A$65.73 A$59.14
Model: 24HS40-5004D-E1000
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$58.99
Model: 14HS13-0804D-E22-300
Motor Specification
Manufacturer Part Number: 14HS13-0804D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.18Nm(25.5oz.in)
Rated Current/phase: 0.80A
Voltage: 5.40V
Phase Resistance: 6.80ohms
Inductance: 10.00mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Si..
A$58.96
Model: 23E1K-12
Electrical Specification
Manufacturer Part Number: 23E1K-12
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.93oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.4mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$58.54
Model: 11HS20-0674S-PG51
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S-PG51
Motor ..
A$58.46
Hot
Model: 11HS20-0674S-PG27
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S-PG27
Motor..
A$58.46
Hot
Model: 11HS20-0674S-PG100
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S-PG100
M..
A$58.46
Model: 11HS20-0714S-PG51
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG51
Moto..
A$58.46
Model: 11HS20-0674D-PG51
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 51.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674D-PG51
Mo..
A$58.46
Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
A$58.22
Hot
Model: CL42T-V41
CL42T-V41 is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ experience in stepper and servo controls...
A$58.22
Hot
Model: 34HE45-6004S
Electrical Specification
Manufacturer Part Number: 34HE45-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 8.2Nm(1161.22oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.51ohms± 10%
Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$58.18
Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
A$57.98
Model: 23HS22-4004D-B280
This is a Nema 23 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 1.2Nm(169.93oz.in), rated current of 4.0A and 96mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure that..
A$57.71
Model: 34HE46-6004D-E1000
Electrical Specification
Manufacturer Part Number: 34HE46-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 9.0Nm(1274.5oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.45ohms± 10%
Inductance: 4.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$57.71
Hot
Model: 23HS45-4204D-E1000
Motor Specification
Manufacturer Part Number: 23HS45-4204D-E1000
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.0Nm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.82ohms
Inductance: 3.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 57 x 57mm
Bod..
A$57.63
Model: 14HS13-0804S-PG51
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG51
Motor..
A$57.62
Model: 14HS13-0804S-PG27
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG27
Motor ..
A$57.62
Hot
Model: 14HS13-0804S-PG100
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG100
Moto..
A$57.62
Model: 14HS13-0804D-PG51
This Nema 14 stepper motor with 34mm body and 1.00A rated current, integrated a planetary gearbox of 51.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804D-PG51
M..
A$57.62
Model: 23HS45-4204S-RV
This motor has a torque of 3.0Nm(425oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly.
Electrical Specification
Manufacturer Part Number: 23HS45-4204S-RV
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/pha..
A$57.33
Model: 23HS22-2904S-MG5
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$57.26
Model: 23HS22-2904S-MG10
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$57.26
Model: 17HS15-1684S-WG40
This Nema 17 stepper motor comes equipped with a unique 40:1 ratio square worm gearbox. The gearbox utilizes high-quality, long-lasting synthetic lubricants, making it maintenance-free. Its output shaft and drive shaft are offset by 90°, filling the gap in the market for NEMA17 size worm gearboxes. ..
A$57.26
Model: ISC02-04
Electrical Specifications
Manufacturer Part Number: ISC02-04
Step Angle: 1.8deg
Holding Torque: 44Ncm(62.32oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 2ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 42 x 42mm
Body Length: 69.5mm
Shaft Diameter: Φ5mm
..
A$57.23
Model: ISD02-04
Electrical Specifications
Manufacturer Part Number: ISD02-04
Step Angle: 1.8deg
Holding Torque: 44Ncm(62.31oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 2ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 42 x 42mm
Body Length: 69.5mm
Shaft Diameter: Φ5mm
..
A$57.23
Model: 23HP45-4204S
Electrical Specification
Manufacturer Part Number: 23HP45-4204S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.88ohms± 10%
Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$57.22
Hot
Model: 11HS20-0674S-PG5
This Nema 11 single shaft stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S..
A$56.82
Hot
Model: 11HS20-0674S-PG19
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S-PG19
Motor..
A$56.82
Hot
Model: 11HS20-0674S-PG14
This Nema 11 single shaft stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20..
A$56.82
Model: 11HS20-0674D-PG5
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. A 5mm diameter rear shaft is available. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Man..
A$56.82
Model: 11HS20-0674D-PG14
This Nema 11 stepper motor with 51mm body and 0.67A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. A Φ4mm diameter rear shaft with screw holes on rear endcap is available. It's a good solution to applications that with limited space but need low speed and/or high torque.
..
A$56.82
Model: 11HS12-0674D2-PG100
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674D2-P..
A$56.82
Hot
Model: 11HS12-0674D1-PG100
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. A 3.9mm diameter rear shaft with screw holes on rear endcap are available.
..
A$56.82
Hot
Model: 11HS12-0674D1-PG27
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. A 3.9mm diameter rear shaft with screw holes on rear endcap is available. It's a good solution to applications that with limited space but need low speed and/or high torque. ..
A$56.82
Hot
Model: 11HS12-0674D-PG5
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. A 5mm diameter rear shaft is available. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manuf..
A$56.82
Model: 11HS12-0674D-PG27
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. A 5mm diameter rear shaft is available. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manu..
A$56.82
Hot
Model: 1-DM542T-23HS45
This CNC kit included:
1 x DM542T: Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor
1 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Motor Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bi..
A$56.56
Hot
Model: 11HS18-0674S-PG5
This Nema 11 stepper motor with 45mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS18-0674S-PG5
Motor..
A$56.26
Hot
Model: 14HS13-0804S-PG5
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG5
Motor ..
A$55.87
Hot
Model: 14HS13-0804S-PG19
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG19
Motor ..
A$55.87
