Model: 23HS22-4004D-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-4004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.93oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms± 10%
Inductance: 1.7mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$39.90
-31 %
Model: CN-11HS20-0714S-PG14
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG14
Mot..
A$56.82 A$39.46
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification
Manufacturer Part Number: 23HS30-2804D
Motor Type: Bipolar Stepper
Step Angle:..
A$38.90
Model: 23HS30-5004-ME1K
This Nema 23 closed-loop stepper motor delivers a holding torque of 2.00Nm(283.22oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$38.62
Model: 17HS19-1684S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$38.56
Model: 17HS19-1684S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$38.56
Model: ST-C02
This compact integrated stepper motor driver and controller is designed for single-axis stepper motors, featuring a wide operating voltage range of 10–30VDC and a broad speed adjustment range. It comes with multiple built-in fixed operation modes and integrates drive and control functions into a c..
A$38.51
Model: 3-17HS15-1504S-X1
Package includes: 3 x 17HS15-1504S-X1
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 45Ncm(63.74oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
Model: 24HR04-1004S
This bipolar pancake Nema 24 stepper motor with step angle 1.8deg and size Φ60x9.6mm. It has 4 wires, each phase draws 1A, with holding torque 6Ncm(8.5oz.in).
Electrical Specification
Manufacturer Part Number: 24HR04-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6N..
A$37.63
Model: 17HS15-1584S-MG5
This Nema 17 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 5:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the mo..
A$37.47
Hot
Model: 17HS15-1584S-MG10
This Nema 17 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 10:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$37.47
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$37.07
Hot
Model: 17HS26-2304S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67mm. It has 4 wires, each phase draws 2.3A, with holding torque 79Ncm(111.896oz.in).
Electrical Specification
Manufacturer Part Number: 17HS26-2304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 79..
A$36.99
Hot
Model: 23HE45-4204S
Electrical Specification
Manufacturer Part Number: 23HE45-4204S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.88ohms± 10%
Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$36.83
Hot
Model: 23HS22-2804-ME1K
This nema 23 closed loop stepper motor with torque of 1.2Nm(169.93oz.in). The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electrical..
A$36.67
Hot
Model: DM556T
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20 - 50VDC..
A$36.67
Model: 17HS13-0404S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$35.95
Model: 17HS13-0404S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$35.95
Used – 95% New
-39 %
Model: 24HS40-5004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$58.99 A$35.78
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Model: 23HS18-2004H
Electrical Specification
Manufacturer Part Number: 23HS18-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.78Nm(110.5oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.45ohms± 10%
Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificatio..
A$35.55
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: 23HT22-5503S
Electrical Specification
Manufacturer Part Number: 23HT22-5503S
Number of phase: 3
Step Angle: 1.2deg
Holding Torque: 1Nm(141.64oz.in)
Rated Current/phase: 5.5A
Phase Resistance: 0.45ohms
Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$35.49
Hot
Model: 23HS30-1006S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 1.0A, with holding torque 1.35Nm(191.2oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-1006S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.3..
A$35.49
Hot
Model: 23HS30-2804S1
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.85Nm(261.98oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2804S1
Motor Type: Bipolar Stepper
Step ..
A$35.49
Model: 23HS30-3006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm(191.2oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
Manufacturer Part Number: 23HS30-3006D
Motor Type: Un..
A$35.49
Model: 17HS24-2104-ME1K
This nema 17 closed loop stepper motor with 63.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$34.90
Hot
Model: 5-17HE15-1504S
Package includes: 5 x 17HE15-1504S
Electrical Specification
Manufacturer Part Number: 17HE15-1504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 42Ncm(59.49oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
Model: 3-17HS13-0404S1
This 3pcs bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in).
Package includes: 3 x 17HS13-0404S1
Electrica..
A$34.53
Used – 99% New
-5 %
Model: 17HS15-1504-ME1K-USED
This nema 17 closed loop stepper motor with 43.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$36.32 A$34.51
Model: 14HS19-2004H
Electrical Specification
Manufacturer Part Number: 14HS19-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.33Nm(46.74oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.4ohms±10%
Inductance: 2.41mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$34.21
Model: 8HS12-0494H
Electrical Specification
Manufacturer Part Number: 8HS12-0494H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.015Nm(2.12oz.in)
Rated Current/phase: 0.49A
Phase Resistance: 6.9ohms± 10%
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$32.88
Model: 23HS22-4004-ME1K
This Nema 23 closed-loop stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$32.72
Hot
Model: 17HS24-2004D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 2.0A, and a holding torque of 80Ncm(113.29oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better r..
A$32.05
Model: 18HR06-1004S
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16mm. It has 4 wires, each phase draws 1A, with holding torque 9Ncm(12.75oz.in).
Electrical Specification
Manufacturer Part Number: 18HR06-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 9..
A$32.02
Hot
Model: DM542T
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44
Model: 23HR20-2804S
This round bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x52mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.7Nm(99.13oz.in).
Electrical Specification
Manufacturer Part Number: 23HR20-2804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0..
A$30.69
Hot
Model: 23HS32-4004S
Electrical Specification
Manufacturer Part Number: 23HS32-4004S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 2.4Nm(339.87oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.65ohms
Inductance: 3.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Siz..
A$30.27
Hot
Model: 23HS30-2694S
This Nema 23 stepper CNC motor has a step angle of 1.8degrees, size of 57x57x76mm, and draws 2.8A per phase. It has 4 wires and has a holding torque of 1.85Nm(261.98oz.in).Electrical Specification
Manufacturer Part Number: 23HS30-2694S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 1.8..
A$30.27
Model: 23HS30-2694D
Electrical Specification
Manufacturer Part Number: 23HS30-2694D
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 1.85Nm(261.98oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.1ohms± 10%
Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$30.27
Hot
Model: 17HS19-2004-ME1K
This nema 17 closed loop stepper motor with 51.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$30.00
Model: 17HS19-2004D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 2.0A, and a holding torque of 52Ncm(73.64oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better re..
A$30.00
Hot
Model: DM556Y
This Y series digital stepper driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$29.92
Hot
Model: 23HM22-2804S
This bipolar Nema 23 stepper motor with step angle 0.9deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.20Nm(169.93oz.in).
Electrical Specification
Manufacturer Part Number: 23HM22-2804S
Motor Type: Bipolar StepperStep Angle: 0.9deg
Holding Torque: 1.20N..
A$29.54
Model: ST-C01
This small stepper motor controller is used for single-axis stepper motors. It has an operating voltage range of 5-30VDC, a wide adjustable speed range, and various built-in fixed operating modes.
Users can select from these modes and set distance, speed, delay, and quantity of motion. The control..
A$29.42
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
A$29.41
Model: 23HS30-2904S
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.9Nm(269.06oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2904S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding..
A$29.22
Model: 23HS30-2804S2
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2804S2
Motor Type: Bipolar Stepper
Step Angle: 1.8°..
A$29.22
Hot
Model: 23HS30-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg..
A$29.22
Hot
Model: 23HS30-3004S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 3A, with holding torque 1.89Nm(267.65oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-3004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg..
A$29.22
Hot
Model: 17HS15-1504-ME1K
This nema 17 closed loop stepper motor with 43.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$29.09
Hot
Model: 23HP22-2804S
This P series Nema 23 stepper motor, with a rated current of 2.8A and holding torque of 1.20Nm(169.934oz.in), features a step angle of 1.8 degrees and compact dimensions of 57x57x56mm.
Our upgraded version incorporates an innovative winding design to enhance torque and load-driving capabilities. T..
A$28.91
Model: 17HS24-2004-ME1K
This Nema 17 closed-loop stepper motor delivers a holding torque of 80Ncm(113.29oz·in) and features a compact body length of 64.5mm. It integrates a high-resolution magnetic encoder with 3-channel output and 1000PPR(4000CPR), ensuring precise motion feedback.
The key advantages of the magnetic en..
A$28.86
Model: DM556TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quality..
A$28.80
Model: 17HS19-2504S-H
This custom-made high temperature rated NEMA 17 stepper motor is special for VORON printers. It offers a 1.8 degree step angle and high torque with a 48mm body length for use in environments up to 180C.
Electrical Specification
Manufacturer Part Number: 17HS19-2504S-H
Motor Type: Bipolar S..
A$28.78
Model: 17HS15-1504D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 1.5A, and a holding torque of 42Ncm(59.48oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better re..
A$28.40
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 23HS22-280..
A$28.29
Model: 17HS19-1504H
Electrical Specification
Manufacturer Part Number: 17HS19-1504H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.36Nm(51oz.in)
Rated Current/phase: 1.5A
Phase Resistance: 1.56ohms± 10%
Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$28.18
Hot
Model: 3-17HE19-2004S
Package includes: 3 x 17HE19-2004S
Electrical Specification
Manufacturer Part Number: 17HE19-2004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 55Ncm(77.88oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.3ohms
Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$28.13
Hot
Model: 17HS08-1004-ME1K
This is the thinnest closed loop stepper motor we have, it only with 26mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost..
A$27.73
Hot
Model: 8HS13-0604S
Electrical Specification
Manufacturer Part Number: 8HS13-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.8Ncm(2.55oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 5.6ohms
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$27.65
Hot
Model: 23HS20-2004S
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x52mm. It has 4 wires, each phase draws 2.0A, with holding torque 0.9Nm(127.5oz.in).
Electrical Specification
Manufacturer Part Number: 23HS20-2004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.9N..
A$27.41
Model: ISDT17-20
This is an ultra-silent stepper motor driver that is capable of providing a 0.6-2.0A adjustable peak current and the thickness is only 14.5mm. It can be directly mounted onto NEMA 17 series stepper motors without any flanges. The compact size and ulta low noise make it perfect for places with limite..
A$27.09
Hot
Model: DM542Y
This Y series digital stepper driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$26.93
Model: 11HS18-1004H
Electrical Specification
Manufacturer Part Number: 11HS18-1004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.075Nm(10.62oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 2.1ohms±10%
Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$26.83
Hot
Model: 8HS15-0604S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 4Ncm(5.7oz.in)..
A$26.67
Hot
Model: 8HS15-0304S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A, with holding torque 3Ncm(4.25oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3Ncm(4.25oz.in)
R..
A$26.67
Hot
Model: 8HS15-0604D
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 8HS15-0604D
Motor Type: Bipolar Stepper
Step Angle: ..
A$26.67
Model: DM542TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization,making high-qualit..
A$26.18
Model: 17HS19-2004S1-H
This motor with a holding torque of 59Ncm(83.6oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$26.03
Model: 17HS19-2504S-H-V2
This NEMA 17 stepper motor features an 8mm diameter shaft with a precise 1.8-degree step angle and 55Ncm(77.93oz.in) holding torque. Delivering 2.5A per phase, it comes equipped with a 55mm round shaft and 1m cables.
The motor boasts Class H insulation, enabling reliable operation in environments ..
A$25.73
Model: 17HS08-1004D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000PPR(4000CPR) incremental optical encoder, a rated current of 1.0A, and a holding torque of 0.14Nm(19.83oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better r..
A$25.68
Hot
Model: DM332T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 3.2A peak current. You can..
A$25.68
Model: 8HS12-0506S
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.2Ncm(1.70oz.in).
Electrical Specification
Manufacturer Part Number: 8HS12-0506S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.2N..
A$25.57
Hot
Model: 8HS11-0204S
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in).
Electrical Specification
Manufacturer Part Number: 8HS11-0204S
Motor Type: Bipolar Stepper
Step..
A$25.57
Model: 17HS13-1504H
Electrical Specification
Manufacturer Part Number: 17HS13-1504H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.25Nm(35.4oz.in)
Rated Current/phase: 1.5A
Phase Resistance: 1.56ohms ± 10%
Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificatio..
A$25.49
Model: 11HS13-1004H
Electrical Specification
Manufacturer Part Number: 11HS13-1004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.06Nm(8.5oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 2.1ohms± 10%
Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$25.49
Used – 95% New
-20 %
Model: DM542T-USED
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44 A$25.15
Model: 23HS22-1006S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in).
Electrical Specification
Manufacturer Part Number: 23HS22-1006S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.9N..
A$25.04
Model: 23HS21-0446S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x54mm. It has 6 wires, each phase draws 0.44A, with holding torque 0.6Nm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 23HS21-0446S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0..
A$25.04
Model: 23HS22-1006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
Manufacturer Part Number: 23HS22-1006D
Motor Type: Unipolar Step..
A$25.04
Hot
Model: 23HS22-3008D
This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 0.9Nm(127.5oz.in) with unipolar connection and 1.26Nm(178.4oz...
A$25.04
Hot
Model: 23HS16-0884S
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 0.88A, with holding torque 0.6Nm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 23HS16-0884S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.6Nm..
A$24.45
Model: 17HS24-1206D
Electrical Specification
Manufacturer Part Number: 17HS24-1206D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 65Ncm(92oz.in)
Rated Current/phase: 1.2A
Phase Resistance: 6.0ohms
Inductance: 7.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifications
Fr..
A$24.32
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
Model: 17HS24-1206S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 1.2A, with holding torque up to 65Ncm(92oz.in).
Electrical Specification
Manufacturer Part Number: 17HS24-1206S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6..
A$23.78
Model: 14HS14-1254H
Electrical Specification
Manufacturer Part Number: 14HS14-1254H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.16Nm(22.66oz.in)
Rated Current/phase: 1.25A
Phase Resistance: 1.86ohms± 10%
Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
A$23.49
Hot
Model: 23HE30-2804S
Electrical Specification
Manufacturer Part Number: 23HE30-2804S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 2.0Nm(283.22oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.17ohms± 10%
Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$23.44
Hot
Model: 23HS39-5004S
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 57x57x100mm, this 4-wire motor is ideal for precise positioning in various automation applications, offering reliable performance and robust torque out..
A$23.41
Model: 17HS19-2504S-H-V5
This NEMA 17 stepper motor features an 80mm shaft with a 5mm diameter, delivering a precise 1.8° step angle and a high holding torque of 55Ncm(77.93oz-in). With a rated current of 2.5A per phase, it comes with a 1m cables.
Built with Class H insulation, the motor operates reliably in tempera..
A$23.28
Hot
Model: 14HS20-1504S
This Nema 14 stepper motor is the strongest model in Nema 14 size motors, it with step angle 1.8deg and size 35x35x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in).
Electrical Specification
Manufacturer Part Number: 14HS20-1504S
Motor Type: Bipolar Stepper
S..
A$23.15
Hot
Model: 14HR08-0654S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x19.6mm. It has 4 wires, each phase draws 0.65A, with holding torque 8Ncm(11.33oz.in).
Electrical Specification
Manufacturer Part Number: 14HR08-0654S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding To..
A$23.06
Hot
Model: 14HR05-0504S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x12.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HR05-0504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Hol..
A$23.06
Model: 17HS19-2504S-H-V6
This NEMA 17 stepper motor features a 38mm-long, 5mm-diameter shaft and comes with a 1-meter cable terminated in a 2.54mm JST-XH connector.
With a step angle of 1.8°, it provides a holding torque of 55Ncm(77.93oz-in) and a rated current of 2.5A per phase. Built with Class H insulation, it can reli..
A$22.67
Model: 14HR09-0434S-C1
This custom round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x21.5mm. It has 4 wires, each phase draws 0.43A, with holding torque 9.0Ncm(12.75oz.in). A 20 teeth MXL pulley is available, it's a good choice for camera and monitor.
Electrical Specification
Manufactu..
A$22.43
Hot
Model: 14HR07-1004VRN
Electrical Specification
Manufacturer Part Number: 14HR07-1004VRN
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 9Ncm(12.75oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.9ohms
Inductance: 2.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifications
..
A$22.13
Hot
Model: DM320T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 8-Nema 17 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 2.2A peak current. You can ..
A$22.00
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
Manufacturer Part Number: 23HS16-2804D
Motor Type: Bipolar Stepp..
A$21.92
Hot
Model: 17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$21.44
Hot
Model: 23HS22-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.24Nm(175.6oz.in).
Electrical Specification
Manufacturer Part Number: 23HS22-2804S
Motor Type: Bipolar Stepper
Step Angle: 1.8de..
A$21.39
