Model: DM556EC
The DM556EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 24-50VDC and supporting up to 5.6A current. It features 100Mbps full-duplex EtherCAT communication with CoE (CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position, Velocity..
A$84.16
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL57EC
The CL57EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 24-50VDC input, adjustable current up to 7.2A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple digital i..
A$95.38
Model: DM860Y
This Y series digital stepper driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effec..
A$50.50
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
A$71.81
Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
A$57.98
Used – 80% New
-53 %
Model: 23HS30-2904S-USED
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.89Nm(267.65oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2904S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holdin..
A$29.22 A$13.68
Used – 80% New
-61 %
Model: 34HS61-6004S1-USED
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41 A$45.81
Used – 80% New
-55 %
Model: 34HS59-6004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 34HS59-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.53ohms± 10%
Inductance: 4.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
A$100.13 A$45.12
Used – 95% New
-39 %
Model: 24HS40-5004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$58.99 A$35.78
Used – 99% New
-10 %
Model: 23HS40-5004D-E1000-USED
This is a Nema 23 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 5.0A and a holding torque of 3.00Nm(424.83oz.in). Compared to open loop stepper motors, it offers higher precision, higher torque, lower motor heating, lower power consumption and better response..
A$65.73 A$59.14
Used – 90% New
-45 %
Model: 23HS22-2804D-PG4-E1000-USED
Motor Specification
Manufacturer Part Number: 23HS22-2804D-PG4-E1000
Motor Type: Bipolar Stepper
Frame Size: 57 x 57mm
Motor Length: 56mm
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 1.25Nm(177oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Voltage: 2.6..
A$80.40 A$44.59
Used – 90% New
-60 %
Model: 23HS45-4204S-USED
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).
Electrical Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg ..
A$45.92 A$18.40
Used – 80% New
-58 %
Model: 23HS30-2804S-USED
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
..
A$29.22 A$12.26
Used – 99% New
-5 %
Model: 17HS15-1504-ME1K-USED
This nema 17 closed loop stepper motor with 43.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$36.32 A$34.51
Used – 80% New
-59 %
Model: 17HS16-2004S1-USED
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61 A$5.92
Used – 95% New
-59 %
Model: 17HS15-1504S-X1-USED
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm(63.74oz.in).
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding T..
A$14.61 A$5.92
Used – 80% New
-45 %
Model: 16HM12-0634D-USED
This bipolar Nema 16 stepper motor features a compact size of 39.2x39.2x31mm, a step angle of 0.9°, and a 4-wire configuration, with each phase drawing 0.63A. It delivers a robust holding torque of 12Ncm(16.99oz.in), making it ideal for precision motion control applications such as 3D printers, ro..
A$18.82 A$10.35
Used – 95% New
-20 %
Model: DM542T-USED
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44 A$25.15
Model: 1-CL86T-S48-V41
Items in Kit
1 x 34HS31-6004D-E1000: 4.3Nm Closed loop stepper motor
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m motor and encoder extension cables1 x CABLE-PC-1: RS232 Debugging Cable
Motor Spe..
A$123.02
Model: 1-CL57T-S40-V41
Items in Kit
1 x 24HS40-5004D-E1000: 4.0Nm Closed loop stepper motor
1 x CL57T-V41: Nema 23/Nema 24 Closed loop stepper motor driver V4.11 x CABLE-PC-1: RS232 Debugging Cable1 x CE2M: 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepper Motor1 x CM2M-20: RV-4 AWG20 1.7m(67") ..
A$103.98
Model: 4-CLTS90-V41
This CNC kit included:
4 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.0Nm/1274.5oz.in with Encoder 1000PPR
4 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply Step..
A$648.74
Model: 4-CLTS48-V41
This CNC kit included:
4 x 34HS31-6004D-E1000: Nema 34 Closed Loop Stepper Motor 4.30Nm(608.93oz.in) with Encoder 1000PPR
4 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply St..
A$606.82
Model: 4-CLTS40-V41
This CNC kit included:
4 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
4 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.0Nm/566.56oz.in Encoder 1000PPR
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor ..
A$461.33
Model: 4-CLTS30-V41
This CNC kit included:
4 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
4 x 24HS34-5004D-E1000: Nema 24 Closed Loop Stepper Motor 3.0Nm/424.83oz.in Encoder 1000PPR
1 x S-500-36: 500W 36V Switching Power Supply Stepper Motor CNC Router..
A$450.69
