Model: 17E1KBK05-05
Electrical Specification
Manufacturer Part Number: 17E1KBK05-05
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 48Ncm(67.99oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.35ohms
Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$131.71
Model: 34IP67-45
This P series Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$175.38
Model: 23IP67-20
This P series Nema 23 stepper motor with IP67 waterproof ratings and 2Nm(254.95oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Specif..
A$120.10
Model: 23IP67-12
This P series Nema 23 stepper motor with IP67 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$110.61
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Model: 34IP65-85
This P series Nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
..
A$165.10
Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 34IP65-120
This P series Nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specificati..
A$200.08
Model: 34E1KIP65-85
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elec..
A$204.05
Model: 34E1KIP65-45
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$143.60
Model: 34E1KIP65-120
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electric..
A$241.50
Model: 24IP65-30
This P series Nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$95.39
Model: 24E1KIP65-30
This P series closed loop nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electri..
A$115.49
Hot
Model: 23IP65-20
This P series Nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283,22oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$79.79
Hot
Model: 23IP65-12
This P series Nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
M..
A$69.97
Model: 23E1KIP65-20
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283.28oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrica..
A$101.78
Model: 23E1KIP65-12
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$106.38
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
Model: 8HS15-0604S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$86.02
Model: 8HS15-0604S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$86.02
Model: 8HS15-0604S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$120.75
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Model: 8HS11-0204S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$81.98
Model: 8HS11-0204S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$99.36
Model: 8HS11-0204S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$99.36
Model: 8HS11-0204S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$81.98
Model: 8HS11-0204S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$116.74
Model: 8HS11-0204D-PG90
This Nema 8 stepper motor with 38mm body and 0.2A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS11-0204D-PG90
Moto..
A$61.81
Model: 8HS12-0604D-E1000
This is a Nema 8 closed loop stepper motor, equipped with an 1000ppr(4000cpr) incremental optical encoder, has a rated current of 0.6A and a holding torque of 0.015Nm(2.12oz.in). It offers improved accuracy, higher torque, reduced motor heating, lower power consumption, and better response to extern..
A$77.07
Model: 42HS79-8004S1
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification
Manufacturer Part Number: 42HS79-8004S1
Step Angle: 1.8deg
Holdi..
A$187.02
Model: 42HS59-7004S
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in).
Electrical Specification
Manufacturer Part Number: 42HS59-7004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 22Nm(3115.46oz.in)
Rated Curr..
A$181.79
Model: 34HS30-5604S-SG50
This Nema 34 stepper motor is equipped with a spur gearbox. The gear ratio is 50:1 and the max. return difference is 3deg. It's a good solution to applications that require reliability, compact design and high torque but low cost.
Electrical Specification
Manufacturer Part Number: 34HS30-5604S-S..
A$188.18
Model: 34HS30-5604S-SG20
This Nema 34 stepper motor is equipped with a spur gearbox. The gear ratio is 20:1 and the max. return difference is 3.5deg. It's a good solution to applications that require reliability, compact design and high torque but low cost.
Electrical Specification
Manufacturer Part Number: 34HS30-5604S..
A$188.18
Model: 34HS30-5604S-SG10
This Nema 34 stepper motor is equipped with a spur gearbox. The gear ratio is 10:1 and the max. return difference is 4deg. It's a good solution to applications that require reliability, compact design and high torque but low cost.
Electrical Specification
Manufacturer Part Number: 34HS30-5604S-S..
A$173.70
Model: 34HS46-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 8.5Nm(1203.70oz.in), rated current of 6.0A and 161mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure th..
A$118.62
Model: 34HS31-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 4.8Nm(679.74oz.in), rated current of 6.0A and 123mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure tha..
A$103.62
Model: 34HS61-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 13.0Nm(1840.95oz.in), rated current of 6.0A and 199mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure t..
A$138.62
Model: 34HS38-4004D-SG20
This Nema 34 stepper motor with 98mm body and 4.0A rated current, integrated a104mm square spur gearbox of 20:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 34HS38-4004D-SG20
Mo..
A$182.51
Model: 34HS38-4004D-SG9
This Nema 34 stepper motor with 97mm body and 4.0A rated current, integrated a104mm square spur gearbox of 9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 34HS38-4004D-SG9
Moto..
A$163.30
Model: 34HS38-4004D-SG13
This Nema 34 stepper motor with 97mm body and 4.0A rated current, integrated a104mm square spur gearbox of 13:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 34HS38-4004D-SG13
Mo..
A$244.96
Model: 34HS46-5004D-B400
Motor Specification
Manufacturer Part Number: 34HS46-5004D-B400
Motor Type: Bipolar
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1204oz.in)
Rated Current/phase: 5A
Voltage: 5V
Phase Resistance: 1ohms
Inductance: 11mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86mm
Body Lengt..
A$180.43
Model: 34HS38-4204D-B400
Motor Specification
Manufacturer Part Number: 34HS38-4204D-B400
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 7Nm(1001oz.in)
Rated Current/phase: 4.24A
Voltage: 3.39V
Phase Resistance: 0.8ohms
Inductance: 8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86m..
A$145.44
Model: 34HS27-4004D-B400
Motor Specification
Manufacturer Part Number: 34HS27-4004D-B400
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.4Nm(481oz.in)
Rated Current/phase: 4.0A
Voltage: 2.8V
Phase Resistance: 0.7ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86..
A$122.70
Model: 24HS34-5004D-B280
This is a Nema 24 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 3.0Nm(424.83oz.in), rated current of 5.0A and 126mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure tha..
A$75.90
Model: 24HS40-5004-ME1K
This Nema 24 closed-loop stepper motor delivers a holding torque of 4.00Nm(566.45oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$52.72
Model: 23HS22-1006S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in).
Electrical Specification
Manufacturer Part Number: 23HS22-1006S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.9N..
A$25.04
Model: 23HS21-0446S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x54mm. It has 6 wires, each phase draws 0.44A, with holding torque 0.6Nm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 23HS21-0446S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0..
A$25.04
Model: 23HS30-2804S-HG10
This Nema 23 stepper motor with 76mm body and 2.80A rated current, integrated with a 54mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS30-2804s-HG10
Motor T..
A$133.39
Model: 23HS30-2904S-MG5
This Nema 23 stepper motor is equipped with MG series high precision gearbox. The gear ratio is 5:1 and the max. backlash is 30arcmin. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the motor or gear..
A$64.08
Model: 23HS30-2904S-MG50
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 50:1 and the Max. backlash is 50 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$75.44
Model: 23HS30-2904S-MG20
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 20:1 and the Max. backlash is 50 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$75.44
Model: 23HS30-2904S-MG10
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 10:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$64.08
Hot
Model: 23HS22-2804S-HG5
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 54mm Planetary gearbox of 5:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG5
Motor Type: B..
A$128.99
Model: 23HS22-2804S-HG15
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 61.65mm Planetary gearbox of 15:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG15
Motor Ty..
A$146.94
Model: 23HS22-2804S-HG100
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 76mm Planetary gearbox of 100:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG100
Motor Typ..
A$146.94
Model: 23HS30-2804S-SG5
This Nema 23 stepper motor with 78mm body and 2.8A rated current, integrated a 60mm square spur gearbox of 5:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-SG5
Moto..
A$89.74
Model: 23HS30-2804S-SG30
This Nema 23 stepper motor with 78mm body and 2.8A rated current, integrated a 60mm square spur gearbox of 30:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-SG30
Mo..
A$94.98
Model: 23HS30-2804S-SG20
This Nema 23 stepper motor with 78mm body and 2.8A rated current, integrated a 60mm square spur gearbox of 20:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-SG20
Mo..
A$94.98
Model: 23HS30-2804S-PG4
This Nema 23 stepper motor with 76mm body and 2.8A rated current, integrated a planetary gearbox of 4.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-PG4
Motor Ty..
A$98.10
Hot
Model: 23HS30-2804S-PG47
This Nema 23 stepper motor with 76mm body and 2.8A rated current, integrated a planetary gearbox of 46.656:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-PG47
Motor..
A$98.10
Hot
Model: 23HS30-2804S-PG15
This Nema 23 stepper motor with 76mm body and 2.8A rated current, integrated a planetary gearbox of 15.3:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-PG15
Motor T..
A$98.10
Model: 23HS30-2904S-EGS50
This Nema 23 stepper motor comes with a holding torque of 1.90Nm(269.06oz.in) and features a 50:1 high-precision EG series planetary gearbox that guarantees a maximum backlash of only 15arcmin, ensuring repeatable and precise motion.
Designed for reliability in rigorous operating conditions, this..
A$154.02
Model: 23HS22-2804SX-PG4
This Nema 23 stepper motor with 56mm body, step angle 1.8deg and 2.8A rated current, integrated a planetary gearbox of 4.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 23HS2..
A$89.90
Model: 23HS22-2904S-MG5
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$57.26
Model: 23HS22-2904S-MG50
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 50:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$68.62
Model: 23HS22-2904S-EGS50
This Nema 23 stepper motor comes with a holding torque of 1.20Nm(169.93oz.in) and features a 50:1 high-precision EG series planetary gearbox that guarantees a maximum backlash of only 15arcmin, ensuring repeatable and precise motion.
Designed for reliability in rigorous operating conditions, this..
A$145.33
Model: 23HS22-2904S-MG20
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 20:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$68.62
Model: 23HS22-2904S-MG10
This Nema 23 stepper motor delivers a holding torque of 1.20Nm(169.93oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$57.26
Hot
Model: 23HS39-5004S
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 57x57x100mm, this 4-wire motor is ideal for precise positioning in various automation applications, offering reliable performance and robust torque out..
A$23.41
New
-25 %
Model: 23HS22-1504S-C15
This bipolar Nema 23 stepper motor features a 1.8° step angle and delivers a holding torque of 1.16Nm(164.3oz.in), with each phase drawing 1.5A. This motor features an additional MOLEX 39013046 connector compared to the standard 23HS22-2804S model, with a longer cable length of 762mm.
Ele..
A$21.39 A$16.06
New
-33 %
Model: 23HS22-1504S-C14
This bipolar Nema 23 stepper motor features a 1.8° step angle and delivers a holding torque of 1.16Nm (164.3oz.in), with each phase drawing 1.5A.
This motor features an additional MOLEX 39013046 connector compared to the standard 23HS22-2804S model, but the cable length is shortened to 165mm. ..
A$21.39 A$14.30
Model: 23HS30-2804S-RVS30-G5
This Nema 23 size 76mm stepper motor is equipped with a 5:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output shaf..
A$83.58
Model: 23HS30-2804S-RVS30-G30
This Nema 23 size 76mm stepper motor is equipped with a 30:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output shaft..
A$84.62
Model: 23HS30-2804S-RVS30-G15
This Nema 23 size 76mm stepper motor is equipped with a 15:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output sha..
A$84.62
Model: 23HS45-4204D-B280
This is a Nema 23 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 4.2Nm(594.77oz.in), rated current of 4.2A and 152mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure tha..
A$82.72
Model: 23HS45-4204S-RV
This motor has a torque of 3.0Nm(425oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly.
Electrical Specification
Manufacturer Part Number: 23HS45-4204S-RV
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/pha..
A$57.33
Model: 23HS30-5004D-B280
This is a Nema 23 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 2.0Nm(283.22oz.in), rated current of 5.0A and 116.5mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure t..
A$65.44
Model: 23HS45-4204S-RVS30-G50
This Nema 23 size stepper motor is equipped with a 50:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output shaft is..
A$97.36
Model: 23HS45-4204S-RVS30-G30
This Nema 23 size 113mm stepper motor is equipped with a 30:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output..
A$97.36
Model: 23HS45-4204S-RVS30-G20
This Nema 23 size 113mm stepper motor is equipped with a 20:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output sh..
A$97.73
Model: 23HS45-4204S-RVS30-G15
This Nema 23 size 113mm stepper motor is equipped with a 15:1 worm gearbox that has excellent mechanical strength and particularly lightweight. The worm gear speed reducer comes with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity.
Its output sh..
A$97.36
Model: 23HS30-2804S-RV
This motor has a torque of 1.9Nm(269oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-RV
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.9Nm(269oz.in)
Rated Current/pha..
A$41.68
Model: 23HS22-4004D-B280
This is a Nema 23 stepper motor with a 24V 4.5W electromagnetic brake. The motor comes with a holding torque of 1.2Nm(169.93oz.in), rated current of 4.0A and 96mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure that..
A$57.71
Model: 23HS30-2804D-B200
Motor Specification
Manufacturer Part Number: 23HS30-2804D-B200
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.9Nm(269oz.in)
Rated Current/phase: 2.8A
Voltage: 3.2V
Phase Resistance: 1.13ohms
Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 57 x 5..
A$69.76
Model: 23HS22-2804D-B200
Motor Specification
Manufacturer Part Number: 23HS22-2804D-B200
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.26Nm(178.4oz.in)
Rated Current/phase: 2.8A
Voltage: 2.5V
Phase Resistance: 0.9ohms
Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 57 x..
A$81.12
Model: ISD08-30
Electrical Specifications
Manufacturer Part Number: ISD08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10mm
..
A$138.40
Model: ISC08-30
Electrical Specifications
Manufacturer Part Number: ISC08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10m..
A$138.40
Model: ISD04-20
Electrical Specifications
Manufacturer Part Number: ISD04-20
Step Angle: 1.8deg
Holding Torque: 190Ncm(269oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.13ohms
Inductance: 5.4mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 96mm
Shaft Diameter: Φ6.35mm..
A$98.08
Model: ISC04-20
Electrical Specifications
Manufacturer Part Number: ISC04-20
Step Angle: 1.8deg
Holding Torque: 190Ncm(269oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.13ohms
Inductance: 5.4mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 96mm
Shaft Diameter: Φ6.35mm..
A$94.35
Hot
Model: ISD04-10
Electrical Specifications
Manufacturer Part Number: ISD04-10
Step Angle: 1.8deg
Holding Torque: 126Ncm(178.4oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 75mm
Shaft Diameter: Φ6.35m..
A$86.78
Model: ISC04-10
Electrical Specifications
Manufacturer Part Number: ISC04-10
Step Angle: 1.8deg
Holding Torque: 126Ncm(178.4oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 75mm
Shaft Diameter: Φ6.35m..
A$86.78
Model: 23HS22-2804D-HG50-AR3
Electrical Specification
Part Number: 23HS22-2804D-HG50-AR3
Motor Type: Bipolar Stepper
Step Angle: 0.036deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Gearbox S..
A$169.52
Model: 23HS22-HG50-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG50-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms
Inductance: 1.7mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$118.62
Model: 23HS22-HG20-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG20-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$117.25
Model: 23HS22-HG15-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG15-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$118.38
Model: 23HS22-HG5-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG5-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$147.01
Model: 23HS22-HG10-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG10-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$150.56
Model: 23HS22-HG100-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG100-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$167.54
