Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS31-5504D
M..
A$51.84
Model: CL57TE
The CL57TE stepper driver offers significant advantages with its wide 5V-24V control signal compatibility, eliminating the need for manual voltage switching. It features intelligent auto-adjusting output current that can be configured via software without manual intervention. The package includes ..
A$51.31
Model: 34HS25-5604S
This stepper motor with a 30mm long shaft and a motor size of 86x86x64mm is the shortest Nema 34 motor we have. It has 4 wires, each phase draws 5.6A, with a holding torque of 3.3Nm(467.32oz.in).
Electrical Specification
Manufacturer Part Number: 34HS25-5604S
Motor Type: Bipolar Stepper
S..
A$50.88
Model: 34HS27-4004S
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 85.8x85.8x68mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.4Nm(481.48oz.in).
Electrical Specification
Manufacturer Part Number: 34HS27-4004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque..
A$50.72
Model: DM860Y
This Y series digital stepper driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effec..
A$50.50
Model: 34HS26-2006D
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
Manufacturer Part Number: 34HS26-2006D
Motor Type: Unip..
A$50.50
Hot
Model: 17HS24-2104S-PG5
This Nema 17 stepper motor with 60mm body and 2.1A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS24-2104S-PG5
Motor Ty..
A$50.35
Model: 17HS13-0404S-CG5
This custom Nema 17 stepper motor with 34mm body and 0.4A rated current, integrated a 28mm diameter Planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS1..
A$50.35
Model: 14HS11-1004-ME1K
This is the thinnest closed loop stepper motor we have, it only with 34.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher co..
A$50.24
Hot
Model: 23HS30-2804S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-H
Motor ..
A$50.22
Hot
Model: 17E1K-05
Electrical Specification
Manufacturer Part Number: 17E1K-05
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 48Ncm(67.97oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.35ohms
Inductance: 2.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size:..
A$50.18
Model: 24HS40-4204S
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification
Manufacturer Part Number: 24HS40-4204S
Motor Type: Bipolar Stepper
Step Angle:..
A$50.10
