Hot
Model: 17E1K-07
Electrical Specification
Manufacturer Part Number: 17E1K-07
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 72Ncm(101.96oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.75ohms
Inductance: 4.0mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$53.49
Model: 11HS12-0674S-PG5
This Nema 11 single shaft stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674S..
A$53.36
Model: 23HT32-5803S-C1
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Model: 34HS39-6004S
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x98mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 8.0Nm(1132.89oz.in).
Electrical Specification
Manufacturer Part Number: 34HS39-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque..
A$53.15
Hot
Model: 3-17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in).
Package includes: 3 x 17HS24-2104S
Electrical Specification
Manufacturer Part Number: 17HS24-2104S
Mo..
A$53.12
Model: ISC02
The ISC02 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC02, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC02 can provide 0 - 2..
A$52.74
Model: 24HS40-5004-ME1K
This Nema 24 closed-loop stepper motor delivers a holding torque of 4.00Nm(566.45oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$52.72
Hot
Model: 1-DM556Y-23HS39
This CNC kit includes:
1 x 23HS39-5004S: Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
1 x DM556Y: Y Series Digital Stepper Driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 Stepper Motor
Motor Specification
Manufacturer Part Number: 23HS39-5004S
Motor ..
A$52.69
Model: 34HS46-5004D1
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS46-5004D1
Mo..
A$52.18
Model: 17HS13-0404S-CG27
This custom Nema 17 stepper motor with 34mm body and 0.4A rated current, integrated a 28mm diameter Planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS..
A$51.92
