Model: iDM42-RS08
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$119.78
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: 34HP44-6004S
Electrical Specification
Manufacturer Part Number: 34HP44-6004S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 8.2Nm(1161.22oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.55ohms± 10%
Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$119.57
Model: 1-CL86Y-S90
This CNC kit includes:
1 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Motor AWG18 and Encoder Extension Cable
..
A$118.85
Model: 1-CL86Y-S65-V20
This CNC kit includes:
1 x 34HS39-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Exte..
A$118.67
Model: 34HS46-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 8.5Nm(1203.70oz.in), rated current of 6.0A and 161mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure th..
A$118.62
Model: 23HS22-HG50-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG50-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms
Inductance: 1.7mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$118.62
Model: 1-CL86Y-S90-V20
This CNC kit includes:
1 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Motor AWG18 and Encoder Extension Cab..
A$118.51
Model: 1-CLYS30A
This CNC kit includes:
1 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching ..
A$118.38
Model: 23HS22-HG15-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG15-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$118.38
Model: iDMD57-21
This is a Nema 23 integrated stepper motor with a holding torque of 2.1Nm(297.38oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$118.35
Model: iCL57-13
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$118.35
