Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
Hot
Model: 23HS22-2804S-HG5
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 54mm Planetary gearbox of 5:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG5
Motor Type: B..
A$128.99
Hot
Model: 23HS22-2804S-HG10
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 54mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG10
Motor Type:..
A$127.90
Model: iDM60-30
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm. At very compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.
The iDM series are reliable and affordable and performs e..
A$127.89
Model: iDMD57-31
This is a Nema 23 integrated stepper motor with a holding torque of 3.1Nm(439oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact size ..
A$127.89
Model: iCL57-23
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$127.89
Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS59-5004D
Moto..
A$127.17
Model: 1-CL42T-P07-V41
This CNC kit included:
1 x 17E1K-07: P Series Nema 17 Closed Loop Stepper Motor 72Ncm/101.98oz.in with Encoder 1000PPR
1 x CL42T-V41: Closed Loop Stepper DriverV4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
1 x CE2M: 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepp..
A$127.02
Model: iDM57-RS13
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$126.93
Model: iCL42-RS06
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.4Nm(56.64oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$126.93
Model: 24BK20-30
Electrical Specification
Manufacturer Part Number: 24BK20-30
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3Nm(424.92oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.43ohms
Inductance: 1.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: 60..
A$126.75
