Hot
Model: 23HS33-4008S
This nema 23 stepper motor with step angle 1.8deg, a cable length of 500mm and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) with unipolar co..
A$45.14
Hot
Model: 23HS30-2804-ME1K
This nema 23 closed loop stepper motor with torque of 1.85Nm(261.98oz.in). The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electrica..
A$45.17
-50 %
Model: CN-17HS08-1004S-HG100
This Nema 17 stepper motor with a holding torque of 16Ncm(22.66oz.in) is equipped with a planetary gearbox with a gear ratio of 100 and a maximum backlash of 25arcmin. It's a good solution to applications that require good accuracy, reliability at an exceptional value and has limited space but need ..
A$90.62 A$45.31
Hot
Model: 23HS30-5004D-E1000
Electrical Specification
Manufacturer Part Number: 23HS30-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 2.0Nm(283.22oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.42ohms± 10%
Inductance: 1.7mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$45.81
Used – 80% New
-61 %
Model: 34HS61-6004S1-USED
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41 A$45.81
Hot
Model: 23HS45-4204S
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).
Electrical Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg ..
A$45.92
Model: 23HS45-4204S1
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).Different from standard 10mm shaft diameter, the shaft dimater of this motor is 8mm.
Electrical Specification
Manufactur..
A$45.92
Hot
Model: 17HS15-1684S-PG27
This Nema 17 stepper motor with 40mm body and 1.68A rated current, integrated a planetary gearbox of 26.85: 1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS15-1684S-PG27
..
A$46.18
