Model: ST-C02
This compact integrated stepper motor driver and controller is designed for single-axis stepper motors, featuring a wide operating voltage range of 10–30VDC and a broad speed adjustment range. It comes with multiple built-in fixed operation modes and integrates drive and control functions into a c..
A$38.51
Model: 17HS19-1684S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$38.56
Model: 17HS19-1684S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$38.56
Model: 23HS30-5004-ME1K
This Nema 23 closed-loop stepper motor delivers a holding torque of 2.00Nm(283.22oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$38.62
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification
Manufacturer Part Number: 23HS30-2804D
Motor Type: Bipolar Stepper
Step Angle:..
A$38.90
-31 %
Model: CN-11HS20-0714S-PG14
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG14
Mot..
A$56.82 A$39.46
Model: 23HS22-4004D-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-4004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.93oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms± 10%
Inductance: 1.7mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$39.90
Hot
Model: 3-17HS19-2004S1
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
