Model: 23HT22-5503S
Electrical Specification
Manufacturer Part Number: 23HT22-5503S
Number of phase: 3
Step Angle: 1.2deg
Holding Torque: 1Nm(141.64oz.in)
Rated Current/phase: 5.5A
Phase Resistance: 0.45ohms
Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$35.49
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: 23HS18-2004H
Electrical Specification
Manufacturer Part Number: 23HS18-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.78Nm(110.5oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.45ohms± 10%
Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificatio..
A$35.55
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Used – 95% New
-39 %
Model: 24HS40-5004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$58.99 A$35.78
Model: 17HS13-0404S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$35.95
Model: 17HS13-0404S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$35.95
Hot
Model: DM556T
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20 - 50VDC..
A$36.67
Hot
Model: 23HS22-2804-ME1K
This nema 23 closed loop stepper motor with torque of 1.2Nm(169.93oz.in). The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electrical..
A$36.67
Hot
Model: 23HE45-4204S
Electrical Specification
Manufacturer Part Number: 23HE45-4204S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.88ohms± 10%
Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$36.83
Hot
Model: 17HS26-2304S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67mm. It has 4 wires, each phase draws 2.3A, with holding torque 79Ncm(111.896oz.in).
Electrical Specification
Manufacturer Part Number: 17HS26-2304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 79..
A$36.99
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$37.07
Hot
Model: 17HS15-1584S-MG10
This Nema 17 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 10:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the m..
A$37.47
Model: 17HS15-1584S-MG5
This Nema 17 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 5:1 and the Max. backlash is 30 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the mo..
A$37.47
Model: 24HR04-1004S
This bipolar pancake Nema 24 stepper motor with step angle 1.8deg and size Φ60x9.6mm. It has 4 wires, each phase draws 1A, with holding torque 6Ncm(8.5oz.in).
Electrical Specification
Manufacturer Part Number: 24HR04-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6N..
A$37.63
Model: 3-17HS15-1504S-X1
Package includes: 3 x 17HS15-1504S-X1
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 45Ncm(63.74oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
Model: ST-C02
This compact integrated stepper motor driver and controller is designed for single-axis stepper motors, featuring a wide operating voltage range of 10–30VDC and a broad speed adjustment range. It comes with multiple built-in fixed operation modes and integrates drive and control functions into a c..
A$38.51
Model: 17HS19-1684S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$38.56
Model: 17HS19-1684S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$38.56
Model: 23HS30-5004-ME1K
This Nema 23 closed-loop stepper motor delivers a holding torque of 2.00Nm(283.22oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$38.62
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification
Manufacturer Part Number: 23HS30-2804D
Motor Type: Bipolar Stepper
Step Angle:..
A$38.90
-31 %
Model: CN-11HS20-0714S-PG14
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG14
Mot..
A$56.82 A$39.46
Model: 23HS22-4004D-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-4004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.93oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms± 10%
Inductance: 1.7mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$39.90
Hot
Model: 3-17HS19-2004S1
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
Hot
Model: 23HS41-1804S
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x102mm. It has 4 wires, each phase draws 1.8A, with holding torque 2.4Nm(339.87oz.in).
Electrical Specification
Manufacturer Part Number: 23HS41-1804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 2.4N..
A$40.29
Model: 23HP30-2804S
This P series Nema 23 stepper motor has a rated current of 2.8A and an holding torque of 2.0Nm(283.22oz.in). It features a precise step angle of 1.8 degrees and a compact design measuring 57x57x76mm.
Our upgraded version incorporates an innovative winding design to enhance torque from 1.85Nm(261.98..
A$40.54
Model: 23HP32-4004S
This P series Nema 23 stepper motor, with a rated current of 4.0A and holding torque of 2.4Nm(339.87oz.in), features a step angle of 1.8 degrees and compact dimensions of 57x57x84mm.
This series of motors is characterized by its compact size, high torque and high current capabilities, making it id..
A$40.78
Model: 23HS26-2004H
Electrical Specification
Manufacturer Part Number: 23HS26-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.45Nm(205.38oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 2.15ohms± 10%
Inductance: 6.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
A$40.93
Model: 23HS30-2804S-RV
This motor has a torque of 1.9Nm(269oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-RV
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.9Nm(269oz.in)
Rated Current/pha..
A$41.68
Model: 1-DM542Y-23HS30
This CNC kit includes:
1 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
1 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
Motor Specification
Manufacturer Part Number: 23HS30-2804S2
Motor Type: B..
A$42.59
Hot
Model: 23HS33-4008D
This nema 23 stepper motor with step angle 1.8deg, a holding torque(bipolar) of 2.83Nm(400oz.in), a holding torque(unipolar) of 2.0Nm(283oz.in) and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you w..
A$42.85
Model: 3-17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in).
Package includes: 3 x 17HE24-2104S
Electrical Specification
Manufacturer Part Number: 17HE24-2104S
Motor ..
A$43.06
Model: 16HS13-0604S-PG14
This Nema 16 stepper motor with 34mm body and 0.6A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 16HS13-0604S-PG14
Motor ..
A$43.06
Model: 16HS13-0604S-PG5
This Nema 16 stepper motor with 34mm body and 0.6A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 16HS13-0604S-PG5
Motor Ty..
A$43.06
Hot
Model: 17HS13-0404S-PG5
This Nema 17 stepper motor with 34mm body and 0.4A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS13-0404S-PG5
Motor Ty..
A$43.06
Model: 17HS15-0404S-PG19
This Nema 17 stepper motor with 39mm body and 0.4A rated current, integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS15-0404S-PG19
Motor ..
A$44.10
Hot
Model: 17HS15-1684S-PG5
This Nema 17 stepper motor with 40mm body and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS15-1684S-PG5
Motor T..
A$44.30
Model: ISDT23-45
This is a low noise stepper motor driver that comes with a 1.0-4.5A adjustable peak current and the thickness is only 16.5mm. It can be directly mounted onto NEMA 23 series stepper motors without any flanges. The compact size and low noise make it perfect for places with limited space.
Key Featur..
A$44.32
Used – 90% New
-45 %
Model: 23HS22-2804D-PG4-E1000-USED
Motor Specification
Manufacturer Part Number: 23HS22-2804D-PG4-E1000
Motor Type: Bipolar Stepper
Frame Size: 57 x 57mm
Motor Length: 56mm
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 1.25Nm(177oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Voltage: 2.6..
A$80.40 A$44.59
Model: 17HS13-0404S-MG100
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 100:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$44.66
Model: 17HS13-0404S-MG20
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 20:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$44.66
Model: 17HS13-0404S-MG50
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 50:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$44.66
Hot
Model: 34HE31-6004S
Electrical Specification
Manufacturer Part Number: 34HE31-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.8Nm(679.74oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.42ohms± 10%
Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$44.78
Model: 34HS30-6004S
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x78mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 4.8Nm(679.74oz.in).Electrical Specification
Manufacturer Part Number: 34HS30-6004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding T..
A$44.78
Model: 23HS40-5004-ME1K
This Nema 23 closed-loop stepper motor delivers a holding torque of 3.00Nm(424.83oz.in) and features a compact magnetic incremental encoder with 3-channel output and 1000ppr(4000cpr) resolution.
Compared to other closed-loop stepper motors of the same size, this motor delivers higher output torque..
A$44.99
Model: 14HS13-1004S-EGS5
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$45.01
Used – 80% New
-55 %
Model: 34HS59-6004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 34HS59-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.53ohms± 10%
Inductance: 4.8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
A$100.13 A$45.12
Hot
Model: 17HS13-0404S-PG27
This Nema 17 stepper motor with 34mm body and 0.4A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS13-0404S-PG27
Motor ..
A$45.14
Hot
Model: 23HS33-4008S
This nema 23 stepper motor with step angle 1.8deg, a cable length of 500mm and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) with unipolar co..
A$45.14
Hot
Model: 23HS30-2804-ME1K
This nema 23 closed loop stepper motor with torque of 1.85Nm(261.98oz.in). The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electrica..
A$45.17
