Model: DM420Y
This Y series digital stepper driver 0.3-2.2A DC18V-36V for Nema 14, 17, 23 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$21.33
Model: DM420PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–2.0A and an operating voltage of 24–50VDC, making it ideal for Nema 11, 14, 17 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Hot
Model: DM332T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 3.2A peak current. You can..
A$25.68
Hot
Model: DM320T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 8-Nema 17 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 2.2A peak current. You can ..
A$22.00
Model: DM2282T
The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto..
A$233.82
-33 %
Model: CN-42PM96M01
Electrical Specification
Manufacturer Part Number: 42PM96M01
Motor Type: PM Stepper
Phase: 2
Step Angle: 3.75deg
Rated Current/phase: 0.42A
Holding Torque: 49mN.m(6.94oz.in)
Detent Torque: 10.78mN.m(2.521oz.in)
Phase Resistance: 12±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$12.30 A$8.24
-33 %
Model: CN-42PM48M01-SG50
Electrical Specification
Manufacturer Part Number: 42PM48M01-SG50
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.15deg
Rated Current/phase: 0.171A
Holding Torque: 98Ncm(138.807oz.in)
Phase Resistance: 70±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 54mH±20%
Physical Specifica..
A$27.28 A$18.35
-35 %
Model: CN-23HS22-2804-HG50-ME1K
Electrical Specification
Manufacturer Part Number: 23HS22-2804-HG50-ME1K
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearbox ..
A$215.68 A$140.19
-33 %
Model: CN-17HS15-HG20-E1000
Electrical Specification
Manufacturer Part Number: 17HS15-HG20-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.39Nm(55.24oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$133.14 A$89.20
-50 %
Model: CN-17HS08-1004S-HG100
This Nema 17 stepper motor with a holding torque of 16Ncm(22.66oz.in) is equipped with a planetary gearbox with a gear ratio of 100 and a maximum backlash of 25arcmin. It's a good solution to applications that require good accuracy, reliability at an exceptional value and has limited space but need ..
A$90.62 A$45.31
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in).
Electrical Specification
Manufacturer Part Number: 16HM17-0304S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 25Ncm(..
A$20.00 A$14.00
-33 %
Model: CN-11HS22-0904S-PG19
This Nema 11 stepper motor with 55mm body, it's the highest motor in size of Nema 11, Integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS2..
A$70.29 A$47.09
