Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Hot
Model: CL57Y
This is Y series closed loop stepper driver 0-7.0A 24-50VDC for Nema 17, 23, 24 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than ..
A$48.62
Model: CL57TE
The CL57TE stepper driver offers significant advantages with its wide 5V-24V control signal compatibility, eliminating the need for manual voltage switching. It features intelligent auto-adjusting output current that can be configured via software without manual intervention. The package includes ..
A$51.31
Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
A$58.22
Hot
Model: CL57T
This closed-loop stepper driver 0-8.0A 24-48VDC for Nema 17, 23, 24 stepper motor offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fu..
A$54.98
Hot
Model: CL57RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can sa..
A$143.17
Model: CL57PR
This is a closed-loop stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–5.0A and an operating voltage of 20–50VDC, making it ideal for Nema 17, 23, 24 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combi..
A$87.90
Model: CL57EC
The CL57EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 24-50VDC input, adjustable current up to 7.2A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple digital i..
A$95.38
Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
A$57.98
Hot
Model: CL42T-V41
CL42T-V41 is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ experience in stepper and servo controls...
A$58.22
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders.
Electrical Specification
Manufacturer Part Numb..
A$16.45 A$10.69
Model: 8HS22-0804D-E1000
Electrical Specification
Manufacturer Part Number: 8HS22-0804D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.054Nm(7.65oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 8.5ohms± 10%
Inductance: 4.4mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$96.96
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Hot
Model: 8HS15-0604S-PG64
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG64
Motor Type:..
A$68.51
Hot
Model: 8HS15-0604S-PG5
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 4.75:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG5
Motor Type..
A$68.51
Hot
Model: 8HS15-0604S-PG19
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG19
Motor Typ..
A$68.51
Model: 8HS15-0604S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$86.02
Model: 8HS15-0604S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$120.75
Model: 8HS15-0604S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$86.02
Hot
Model: 8HS15-0604S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 4Ncm(5.7oz.in)..
A$26.67
Model: 8HS15-0604D-E1000
This is a Nema 8 closed loop stepper motor, equipped with an 1000ppr(4000cpr) incremental optical encoder, has a rated current of 0.6A and a holding torque of 0.02Nm(2.83oz.in). It offers improved accuracy, higher torque, reduced motor heating, lower power consumption, and better response to externa..
A$82.05
Hot
Model: 8HS15-0604D
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 8HS15-0604D
Motor Type: Bipolar Stepper
Step Angle: ..
A$26.67
Hot
Model: 8HS15-0304S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A, with holding torque 3Ncm(4.25oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3Ncm(4.25oz.in)
R..
A$26.67
Hot
Model: 8HS13-0604S
Electrical Specification
Manufacturer Part Number: 8HS13-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.8Ncm(2.55oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 5.6ohms
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$27.65
Model: 8HS12-0604D-E1000
This is a Nema 8 closed loop stepper motor, equipped with an 1000ppr(4000cpr) incremental optical encoder, has a rated current of 0.6A and a holding torque of 0.015Nm(2.12oz.in). It offers improved accuracy, higher torque, reduced motor heating, lower power consumption, and better response to extern..
A$77.07
Model: 8HS12-0506S-PG90
This unipolar Nema 8 stepper motor with 30mm body and 0.5A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS12-0506S-PG9..
A$68.51
Model: 8HS12-0506S
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.2Ncm(1.70oz.in).
Electrical Specification
Manufacturer Part Number: 8HS12-0506S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.2N..
A$25.57
Model: 8HS12-0494H
Electrical Specification
Manufacturer Part Number: 8HS12-0494H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.015Nm(2.12oz.in)
Rated Current/phase: 0.49A
Phase Resistance: 6.9ohms± 10%
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$32.88
Model: 8HS11-0204S-PG90
Electrical Specification
Manufacturer Part Number: 8HS11-0204S-PG90
Motor Type: Bipolar Stepper
Step Angle: 0.02 deg
Holding Torque without Gearbox: 1.4Ncm(1.98oz.in)
Rated Current/phase: 0.2A
Phase Resistance: 24ohms
Inductance: 8mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Gearbo..
A$68.51
Model: 8HS11-0204S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$99.36
Model: 8HS11-0204S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$81.98
Model: 8HS11-0204S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$99.36
Model: 8HS11-0204S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$116.74
Model: 8HS11-0204S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$81.98
Hot
Model: 8HS11-0204S
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in).
Electrical Specification
Manufacturer Part Number: 8HS11-0204S
Motor Type: Bipolar Stepper
Step..
A$25.57
Model: 8HS11-0204D-PG90
This Nema 8 stepper motor with 38mm body and 0.2A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS11-0204D-PG90
Moto..
A$61.81
Hot
Model: 6HS12-0304S
Electrical Specification
Manufacturer Part Number: 6HS12-0304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.58Ncm(0.82oz.in)
Rated Current/phase: 0.3A
Phase Resistance: 22ohms
Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$104.22
Model: 6HS12-0304D
Electrical Specification
Manufacturer Part Number: 6HS12-0304D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.58Ncm(0.82oz.in)
Rated Current/phase: 0.3A
Phase Resistance: 22ohms
Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$104.22
Model: 5-ULN2003
This 5-wire, 4-phase unipolar stepper motor features center-tapped coils with a common power connection. It is ideally paired with the ULN2003 Darlington transistor array driver chip.
The combination offers a direct pluggable interface, enabling simple connection to standard development boards for..
A$6.62
Hot
Model: 5-17HS19-2004S1
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Model: 5-17HS15-1504S-X1
Package includes: 5 x 17HS15-1504S-X1
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 45Ncm(63.74oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$63.63
Model: 5-17HE19-2004S
Package includes: 5 x 17HE19-2004S
Electrical Specification
Manufacturer Part Number: 17HE19-2004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 55Ncm(77.88oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.3ohms
Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$46.86
Hot
Model: 5-17HE15-1504S
Package includes: 5 x 17HE15-1504S
Electrical Specification
Manufacturer Part Number: 17HE15-1504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 42Ncm(59.49oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.3ohms
Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
Model: 42PM48L01
Electrical Specification
Manufacturer Part Number: 42PM48L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 7.5deg
Rated Current/phase: 0.6A
Holding Torque: 68.6mN.m(9.717oz.in)
Detent Torque: 27.44mN.m(3.887oz.in)
Phase Resistance: 5.8±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance..
A$10.26
Model: 42HS79-8004S1
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification
Manufacturer Part Number: 42HS79-8004S1
Step Angle: 1.8deg
Holdi..
A$187.02
Model: 42HS79-8004S
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8.0A, allowing for a huge torque up to 30Nm(4248oz.in).
Electrical Specification
Manufacturer Part Number: 42HS79-8004S
Step Angle: 1.8deg
Holding Torque: 30Nm(4248oz.in)
Rated C..
A$227.23
Model: 42HS79-8004D
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
Manufacturer Part Number: 42HS79-8004D
Step An..
A$227.23
Model: 42HS59-7004S
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in).
Electrical Specification
Manufacturer Part Number: 42HS59-7004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 22Nm(3115.46oz.in)
Rated Curr..
A$181.79
Model: 4-DM860Y-TR80
YS Series 4 Axis Stepper CNC Kit 8.0Nm(1132.89oz.in) Nema 34 Stepper Motor & Driver & AC Transformer
This CNC kit includes:
4 x 34HS39-6004S: S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
4 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Transformer 220VAC to 4 x 70VA..
A$416.62
Model: 4-DM860Y-TR48
This CNC kit includes:
4 x 34HS30-6004S: S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
4 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Transformer 220VAC to 4 ..
A$389.30
Model: 4-DM860Y-TR120
This CNC kit includes:
4 x 34HS59-6004S: S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
4 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Transformer..
A$486.54
Model: 4-DM860I-S80
This CNC kit included:
4 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
4 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Motor Specification
Manufacturer ..
A$458.90
Model: 4-DM860I-S120
This CNC kit included:
4 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
4 x 34HS59-6004S: S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Driver S..
A$530.72
Model: 4-DM556Y-S30
This CNC kit includes:
4 x 23HS39-5004S: Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
4 x DM556Y: Y Series Digital Stepper Driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 Stepper Motor
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor ..
A$254.80
Model: 4-DM556T-S30
This CNC kit includs:
4 x DM556T: Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor
4 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor CNC Router Kits..
A$305.71
Model: 4-DM542Y-S19
This CNC kit includes:
4 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
4 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
1 x S-500-48: 500W 48V 10.5A 115/230V Switching Power Supply
Motor Spec..
A$231.66
Model: 4-DM542T-S30
This CNC kit includs:
4 x DM542T: Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor
4 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
2 x LE-250-36: 250W 36V 6.9A 115/230V Switching Power Supply
Driver Specification
Puls..
A$268.85
Model: 4-CLYS90-V20
This CNC kit includes:
4 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
4 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
..
A$585.66
Model: 4-CLYS90
This CNC kit includes:
4 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
4 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
4 x CE2-M..
A$589.82
Model: 4-CLYS48-V20
This CNC kit includes:
4 x 34HS31-6004D-E1000: Nema 34 Closed Loop Stepper Motor 4.30Nm(608.93oz.in) with Encoder 1000PPR(4000CPR)
4 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supp..
A$541.17
Model: 4-CLYS40-V20
This CNC kit includes:4 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.00Nm(566.45oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply4 x CE2-M2-..
A$413.42
Model: 4-CLYS30A-V20
This CNC kit includes:4 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor2 x LE-350-36: MEAN WELL 350W 36V 9.7A 115/230V Switching Power Supply4..
A$409.60
Model: 4-CLYS30A
This CNC kit includes:
4 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
4 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
2 x LE-350-36: MEAN WELL 350W 36V 9.7A 115/230V Switching Power Supply
..
A$413.76
Model: 4-CLYS30-V20
This CNC kit includes:4 x 23HS40-5004D-E1000: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply4 ..
A$394.35
Model: 4-CLYS30-1M5-V20
This CNC kit includes:4 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)4 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply..
A$365.74
Model: 4-CLYS30-1M5
This CNC kit includes:
4 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
4 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply
..
A$369.90
Model: 4-CLYS30
This CNC kit includes:
4 x 23HS40-5004D-E1000: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
4 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply
4..
A$481.46
Model: 4-CLYS120-V20
This CNC kit includes:
4 x 34HS59-6004D-E1000: Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in) with Encoder 1000PPR(4000CPR)
4 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Su..
A$636.51
Model: 4-CLYS120
This CNC kit includes:
4 x 34HS59-6004D-E1000: Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in) with Encoder 1000PPR(4000CPR)
4 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
4 x..
A$654.02
Model: 4-CLTS90-V41
This CNC kit included:
4 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.0Nm/1274.5oz.in with Encoder 1000PPR
4 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply Step..
A$648.74
Model: 4-CLTS48-V41
This CNC kit included:
4 x 34HS31-6004D-E1000: Nema 34 Closed Loop Stepper Motor 4.30Nm(608.93oz.in) with Encoder 1000PPR
4 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply St..
A$606.82
Model: 4-CLTS40-V41
This CNC kit included:
4 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
4 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.0Nm/566.56oz.in Encoder 1000PPR
2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor ..
A$461.33
Model: 4-CLTS30A-V41
This CNC kit included:
4 xCL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
4 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor V4.1 3.0Nm/424.83oz.in Encoder 1000PPR
1 x S-500-36: 500W 36V Switching Power Supply Stepper Motor CNC Router ..
A$461.68
Model: 4-CLTS30-V41
This CNC kit included:
4 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
4 x 24HS34-5004D-E1000: Nema 24 Closed Loop Stepper Motor 3.0Nm/424.83oz.in Encoder 1000PPR
1 x S-500-36: 500W 36V Switching Power Supply Stepper Motor CNC Router..
A$450.69
Model: 4-CLTS120-V41
This CNC kit included:
4 x 34HS59-6004D-E1000: Nema 34 Closed Loop Stepper Motor 12.0Nm/1699.34oz.in with Encoder 1000PPR4 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply..
A$704.62
Model: 4-ACLYS65-1M5
This CNC kit includes:
4 x 34HS39-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
4 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x TR1000-A70-A220: 1000VA Single-phase Square Control Tra..
A$520.22
Model: 4-ACLYS65
This CNC kit includes:
4 x 34HS39-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
4 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
4 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Extension Cab..
A$661.38
Model: 4-17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$76.85
Brand: Leadshine
Model: 3DM883
Suitable for a wide range of 3-phase stepper motors, from NEMA frame size 23 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM883 an ideal solution for applications that ..
A$131.71
Brand: Leadshine
Model: 3DM580S
Suitable for a wide range of Stepper motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM580S an ideal solution for applications that require..
A$85.90
Model: 3DM2283T
The 3DM2283T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter aut..
A$238.13
Model: 35VR26-3005S
This is a 5-phase variable reluctance motor with a rated current of 3.0A and a holding torque of 3.2Nm(453.16oz.in). Its simplicity of construction, ability to operate efficiently at high speeds, and high power density make it suitable for applications that require easy assembly and maintenance, hig..
A$88.45
Model: 35PM48M03-SG120
Electrical Specification
Manufacturer Part Number: 35PM48M03-SG120
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.0625deg
Rated Current/phase: 0.4A
Holding Torque: 98Ncm(138.807oz.in)
Phase Resistance: 30±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 17mH±20%
Physical Specific..
A$18.19
Model: 35PM48M02-SG60
Electrical Specification
Manufacturer Part Number: 35PM48M02-SG60
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.125deg
Rated Current/phase: 0.4A
Holding Torque: 117.6Ncm(166.569oz.in)
Phase Resistance: 30±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 17.1mH±20%
Physical Speci..
A$18.18
Model: 35PM48M01-SG30
Electrical Specification
Manufacturer Part Number: 35PM48M01-SG30
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.25deg
Rated Current/phase: 0.4A
Holding Torque: 117.6Ncm(166.569oz.in)
Phase Resistance: 30±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 17.1mH±20%
Physical Specif..
A$18.18
Model: 35PM48L01-SG10
Electrical Specification
Manufacturer Part Number: 35PM48L01-SG10
Motor Type: PM Stepper
Phase: 2
Step Angle: 0.694deg
Rated Current/phase: 0.24A
Holding Torque: 69.58Ncm(98.55oz.in)
Phase Resistance: 100±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: 110mH±20%
Physical Specif..
A$18.18
Model: 35PM48L01
Electrical Specification
Manufacturer Part Number: 35PM48L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 7.5deg
Rated Current/phase: 0.2A
Holding Torque: 53.9mN.m(7.634oz.in)
Detent Torque: 14.7mN.m(2.082oz.in)
Phase Resistance: 60±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$6.77
Model: 34IP67-45
This P series Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$175.38
Model: 34IP65S-85
The S Series Nema 34 waterproof stepper motor features an IP65 rating, ensuring superior protection against dust and water. With a holding torque of 8.5Nm (1203.94oz.in), it delivers robust performance for demanding applications.
Based on the P series, the waterproof connector was changed to a sta..
A$110.54
Model: 34IP65-85
This P series Nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
..
A$165.10
Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 34IP65-120
This P series Nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specificati..
A$200.08
Used – 80% New
-61 %
Model: 34HS61-6004S1-USED
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41 A$45.81
Model: 34HS61-6004S1
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41
Model: 34HS61-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 13.0Nm(1840.95oz.in), rated current of 6.0A and 199mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure t..
A$138.62
Model: 34HS60-6004D-E1000-B700
This is a S series Nema 34 closed loop stepper motor with a holding torque of 12Nm(1699.34oz.in) and rated current of 6.0A. Enquipped with a 1000ppr optical incremental encoder and a 24V 7.0Nm(991.28oz.in) electromagnetic brake, it combines the precision and reliability of closed-loop control with..
A$198.70
