Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Hot
Model: CL86T-V41
This CL86T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive..
A$74.10
Hot
Model: CL86Y
This Y Series closed loop stepper driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than t..
A$63.58
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
A$71.81
-31 %
Model: CN-11HS20-0714S-PG14
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG14
Mot..
A$56.82 A$39.46
-33 %
Model: CN-11HS22-0904S-PG19
This Nema 11 stepper motor with 55mm body, it's the highest motor in size of Nema 11, Integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS2..
A$70.29 A$47.09
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in).
Electrical Specification
Manufacturer Part Number: 16HM17-0304S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 25Ncm(..
A$20.00 A$14.00
-50 %
Model: CN-17HS08-1004S-HG100
This Nema 17 stepper motor with a holding torque of 16Ncm(22.66oz.in) is equipped with a planetary gearbox with a gear ratio of 100 and a maximum backlash of 25arcmin. It's a good solution to applications that require good accuracy, reliability at an exceptional value and has limited space but need ..
A$90.62 A$45.31
-33 %
Model: CN-17HS15-HG20-E1000
Electrical Specification
Manufacturer Part Number: 17HS15-HG20-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.39Nm(55.24oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$133.14 A$89.20
-35 %
Model: CN-23HS22-2804-HG50-ME1K
Electrical Specification
Manufacturer Part Number: 23HS22-2804-HG50-ME1K
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearbox ..
A$215.68 A$140.19
