Model: 8HS15-0604S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$86.02
Model: 8HS15-0604S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$120.75
Model: 8HS15-0604S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$86.02
Model: 8HS15-0604S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Hot
Model: 8HS15-0604S-PG19
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG19
Motor Typ..
A$68.51
Hot
Model: 8HS15-0604S-PG5
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 4.75:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG5
Motor Type..
A$68.51
Hot
Model: 8HS15-0604S-PG64
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG64
Motor Type:..
A$68.51
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Model: 8HS22-0804D-E1000
Electrical Specification
Manufacturer Part Number: 8HS22-0804D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.054Nm(7.65oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 8.5ohms± 10%
Inductance: 4.4mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$96.96
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders.
Electrical Specification
Manufacturer Part Numb..
A$16.45 A$10.69
Hot
Model: CL42T-V41
CL42T-V41 is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ experience in stepper and servo controls...
A$58.22
Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
A$57.98
Model: CL57EC
The CL57EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 24-50VDC input, adjustable current up to 7.2A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple digital i..
A$95.38
Model: CL57PR
This is a closed-loop stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–5.0A and an operating voltage of 20–50VDC, making it ideal for Nema 17, 23, 24 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combi..
A$87.90
Hot
Model: CL57RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can sa..
A$143.17
Hot
Model: CL57T
This closed-loop stepper driver 0-8.0A 24-48VDC for Nema 17, 23, 24 stepper motor offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fu..
A$54.98
Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
A$58.22
Model: CL57TE
The CL57TE stepper driver offers significant advantages with its wide 5V-24V control signal compatibility, eliminating the need for manual voltage switching. It features intelligent auto-adjusting output current that can be configured via software without manual intervention. The package includes ..
A$51.31
Hot
Model: CL57Y
This is Y series closed loop stepper driver 0-7.0A 24-50VDC for Nema 17, 23, 24 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than ..
A$48.62
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Hot
Model: CL86T-V41
This CL86T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive..
A$74.10
Hot
Model: CL86Y
This Y Series closed loop stepper driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than t..
A$63.58
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
A$71.81
-31 %
Model: CN-11HS20-0714S-PG14
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG14
Mot..
A$56.82 A$39.46
-33 %
Model: CN-11HS22-0904S-PG19
This Nema 11 stepper motor with 55mm body, it's the highest motor in size of Nema 11, Integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS2..
A$70.29 A$47.09
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in).
Electrical Specification
Manufacturer Part Number: 16HM17-0304S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 25Ncm(..
A$20.00 A$14.00
-50 %
Model: CN-17HS08-1004S-HG100
This Nema 17 stepper motor with a holding torque of 16Ncm(22.66oz.in) is equipped with a planetary gearbox with a gear ratio of 100 and a maximum backlash of 25arcmin. It's a good solution to applications that require good accuracy, reliability at an exceptional value and has limited space but need ..
A$90.62 A$45.31
-33 %
Model: CN-17HS15-HG20-E1000
Electrical Specification
Manufacturer Part Number: 17HS15-HG20-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.39Nm(55.24oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$133.14 A$89.20
-35 %
Model: CN-23HS22-2804-HG50-ME1K
Electrical Specification
Manufacturer Part Number: 23HS22-2804-HG50-ME1K
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearbox ..
A$215.68 A$140.19
-33 %
Model: CN-42PM48M01-SG50
Electrical Specification
Manufacturer Part Number: 42PM48M01-SG50
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.15deg
Rated Current/phase: 0.171A
Holding Torque: 98Ncm(138.807oz.in)
Phase Resistance: 70±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 54mH±20%
Physical Specifica..
A$27.28 A$18.35
-33 %
Model: CN-42PM96M01
Electrical Specification
Manufacturer Part Number: 42PM96M01
Motor Type: PM Stepper
Phase: 2
Step Angle: 3.75deg
Rated Current/phase: 0.42A
Holding Torque: 49mN.m(6.94oz.in)
Detent Torque: 10.78mN.m(2.521oz.in)
Phase Resistance: 12±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$12.30 A$8.24
Model: DM2282T
The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto..
A$233.82
Hot
Model: DM320T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 8-Nema 17 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 2.2A peak current. You can ..
A$22.00
Hot
Model: DM332T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 3.2A peak current. You can..
A$25.68
Model: DM420PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–2.0A and an operating voltage of 24–50VDC, making it ideal for Nema 11, 14, 17 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Model: DM420Y
This Y series digital stepper driver 0.3-2.2A DC18V-36V for Nema 14, 17, 23 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$21.33
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: DM422T
The DM422T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$46.43
Model: DM456AI
The DM456AI has built with a pulser already, you can control two Max current 2.8A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
A$85.90
Model: DM480AI
The DM480AI has built with a pulser already, you can control two Max current 8.4A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
A$97.82
Brand: Leadshine
Model: DM542
The DM542 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$73.97
Hot
Model: DM542T
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44
Used – 95% New
-20 %
Model: DM542T-USED
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44 A$25.15
Model: DM542TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization,making high-qualit..
A$26.18
Hot
Model: DM542Y
This Y series digital stepper driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$26.93
Brand: Leadshine
Model: DM556
The DM556 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$85.90
Model: DM556EC
The DM556EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 24-50VDC and supporting up to 5.6A current. It features 100Mbps full-duplex EtherCAT communication with CoE (CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position, Velocity..
A$84.16
Model: DM556IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$54.24
Model: DM556PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
A$114.53
Hot
Model: DM556T
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20 - 50VDC..
A$36.67
Model: DM556TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quality..
A$28.80
Hot
Model: DM556Y
This Y series digital stepper driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$29.92
Model: DM860EC
The DM860EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 20-80VAC/30-110VDC and supporting up to 8.5A current. It features 100Mbps full-duplex EtherCAT communication with CoE(CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position,..
A$106.61
Hot
Model: DM860I
The DM860I is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability that is suitable for Cnc drive . Its motor a..
A$53.55
Model: DM860IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0.1–6.0A and an operating voltage of 24–110VDC, making it ideal for Nema 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance at co..
A$74.82
Model: DM860PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0 - 6.0A and an operating voltage of 24 - 110VDC, making it ideal for Nema 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high perfor..
A$91.63
Hot
Model: DM860T
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter au..
A$61.98
Model: DM860TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quali..
A$47.84
Model: DM860Y
This Y series digital stepper driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effec..
A$50.50
Brand: Leadshine
Model: DM870
The DM870 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA23, 24 and 34 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$97.82
Model: DM882RS
This is Modbus RS485 stepper driver 2.1-8.2A 18-80VAC or 30-110VDC for Nema 34 stepper motor. DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save ad..
A$157.47
Model: ESS17-04
Electrical Specifications
Manufacturer Part Number: ESS17-04
Holding Torque: 0.48Nm(68oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differenti..
A$67.17
Model: ESS17-07
Electrical Specifications
Manufacturer Part Number: ESS17-07
Holding Torque: 0.6Nm(85oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differentia..
A$70.45
Model: ESS17-RS04
ESS Series 0.48Nm(68.00oz.in) Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000PPR
The NEMA 17 integrated stepper motor features a holding torque of 0.48Nm(68oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and reli..
A$86.83
Model: ESS17-RS07
The NEMA 17 integrated stepper motor features a holding torque of 0.72Nm(101.96oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and relia..
A$90.10
Model: ESS23-10
Electrical Specifications
Manufacturer Part Number: ESS23-10
Holding Torque: 1.2Nm(169.93oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differe..
A$75.36
Model: ESS23-20
Electrical Specifications
Manufacturer Part Number: ESS23-20
Holding Torque: 2.2Nm(311.55oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differe..
A$81.90
Model: ESS23-RS10
The NEMA 23 integrated stepper motor features a holding torque of 1.2Nm(169.93oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and r..
A$95.02
Model: ESS23-RS20
The NEMA 23 integrated stepper motor features a holding torque of 2.2Nm(311.55oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and r..
A$101.57
Model: ESS24-30
Electrical Specifications
Manufacturer Part Number: ESS24-30
Holding Torque: 3.0Nm(424.83oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current:10mA
Logic Input Voltage:5V
Encoder Type: Incremental
Encoder Output Type: Different..
A$96.66
Model: iCL42-03
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.3Nm(42.48oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.3Nm(42.48oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$98.78
Model: iCL42-06
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm(84.96oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.6Nm(84.96oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$103.55
Model: iCL42-08
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$111.18
Model: iCL42-RS06
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.4Nm(56.64oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$126.93
Model: iCL42-RS08
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$134.10
Model: iCL57-13
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$118.35
Model: iCL57-23
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$127.89
Model: iCL57-RS13
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$141.73
Model: iCL57-RS23
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$151.28
Model: iCL60-30
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.0Nm(424.83oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$142.69
Model: iCL60-35
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.5Nm(495.64oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$152.22
Model: iCLD57-21
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$132.66
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
Model: iDM42-03
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce ..
A$85.42
Model: iDM42-06
This is a Nema 17 integrated stepper motor with a holding torque of 0.6Nm(84.97oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact si..
A$89.23
Model: iDM42-08
This is a Nema 17 integrated stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact s..
A$96.40
Model: iDM42-RS06
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$112.14
Model: iDM42-RS08
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$119.78
Model: iDM57-13
This is a Nema 23 integrated stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact siz..
A$103.55
Model: iDM57-23
This is a Nema 23 integrated stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$113.57
Model: iDM57-RS13
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$126.93
Model: iDM57-RS23
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$136.48
Model: iDM60-30
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm. At very compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.
The iDM series are reliable and affordable and performs e..
A$127.89
Model: iDM60-35
This is a Nema 24 integrated stepper motor with a holding torque of 3.5Nm(495.64oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$137.90
Model: iDMD57-21
This is a Nema 23 integrated stepper motor with a holding torque of 2.1Nm(297.38oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$118.35
Model: iDMD57-31
This is a Nema 23 integrated stepper motor with a holding torque of 3.1Nm(439oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact size ..
A$127.89
