Model: iCL60-35
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.5Nm(495.64oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$152.22
Hot
Model: 11HS12-0674D1-PG100
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. A 3.9mm diameter rear shaft with screw holes on rear endcap are available.
..
A$56.82
Model: 17HM13-0316S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in).
Electrical Specification
Manufacturer Part Number: 17HM13-0316S
Motor Type: Unipolar Stepper
Step Angle: 0.9deg
Holding To..
A$15.14
Model: iDM42-03
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce ..
A$85.42
Model: 11HS12-0674D2-PG100
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674D2-P..
A$56.82
Model: 17HM15-0406S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in).
Electrical Specification
Manufacturer Part Number: 17HM15-0406S
Motor Type: Unipolar Stepper
Step Angle: 0.9deg
Holding Tor..
A$16.18
Model: iDM42-06
This is a Nema 17 integrated stepper motor with a holding torque of 0.6Nm(84.97oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact si..
A$89.23
Model: 11HS12-0704S-EGS5
This Nema 11 stepper motor comes with a holding torque of 0.07Nm(9.91oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$75.15
