Model: 11HS12-0674D-PG14
This Nema 11 stepper motor with 32mm body and 0.67A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674D-PG14
Motor..
A$55.17
Model: 17HF24-1805S
This is a 5-phase stepper motor with a rated current of 1.8A and a holding torque of 0.5Nm(70.81oz.in). Compared to 2-phase stepper motors, 5-phase stepper motors have higher resolution, lower vibration, lower noise, etc. It is widely used in printing industry, medical equipment, optoelectronics ind..
A$110.02
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
Model: 11HS12-0674D-PG27
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. A 5mm diameter rear shaft is available. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manu..
A$56.82
Hot
Model: 17HM08-1204S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x22mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm(15.58oz.in).
Electrical Specification
Manufacturer Part Number: 17HM08-1204S
Motor Type: Bipolar StepperStep Angle: 0.9deg
Holding Torque:..
A$14.61
Model: 17HM13-0316D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HM13-0316D
Motor Type: Unipolar Stepper
Step ..
A$15.14
Model: iCL60-30
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.0Nm(424.83oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$142.69
Hot
Model: 11HS12-0674D1-PG27
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. A 3.9mm diameter rear shaft with screw holes on rear endcap is available. It's a good solution to applications that with limited space but need low speed and/or high torque. ..
A$56.82
