Model: 17HS08-1004S-H
This motor with a holding torque of 16Ncm(22.7oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$17.15
Model: Vacuum-Rated
Vacuum Rated Stepper Motor
Suitable for use in vacuum/high/low temperature environments
Vacuum level: Max. 1.0x10^-7Pa
Radiation resistant: 10^6Gy
Low outgassing rate
Power consumption optimized design
Heat dissipation compliant
Low vibration
Withstand high amplitude vibration
Traceabilit..
A$0.00
Model: 4-17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$76.85
Hot
Model: 17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$21.44
Model: 17HS19-2004S1-H
This motor with a holding torque of 59Ncm(83.6oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$26.03
Model: 17HS19-2504S-H
This custom-made high temperature rated NEMA 17 stepper motor is special for VORON printers. It offers a 1.8 degree step angle and high torque with a 48mm body length for use in environments up to 180C.
Electrical Specification
Manufacturer Part Number: 17HS19-2504S-H
Motor Type: Bipolar S..
A$28.78
Model: 17HS19-2504S-H-V6
This NEMA 17 stepper motor features a 38mm-long, 5mm-diameter shaft and comes with a 1-meter cable terminated in a 2.54mm JST-XH connector.
With a step angle of 1.8°, it provides a holding torque of 55Ncm(77.93oz-in) and a rated current of 2.5A per phase. Built with Class H insulation, it can reli..
A$22.67
Model: 17HS19-2504S-H-V2
This NEMA 17 stepper motor features an 8mm diameter shaft with a precise 1.8-degree step angle and 55Ncm(77.93oz.in) holding torque. Delivering 2.5A per phase, it comes equipped with a 55mm round shaft and 1m cables.
The motor boasts Class H insulation, enabling reliable operation in environments ..
A$25.73
Model: 17HS19-2504S-H-V5
This NEMA 17 stepper motor features an 80mm shaft with a 5mm diameter, delivering a precise 1.8° step angle and a high holding torque of 55Ncm(77.93oz-in). With a rated current of 2.5A per phase, it comes with a 1m cables.
Built with Class H insulation, the motor operates reliably in tempera..
A$23.28
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
A$29.41
-33 %
Model: CN-42PM48M01-SG50
Electrical Specification
Manufacturer Part Number: 42PM48M01-SG50
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.15deg
Rated Current/phase: 0.171A
Holding Torque: 98Ncm(138.807oz.in)
Phase Resistance: 70±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 54mH±20%
Physical Specifica..
A$27.28 A$18.35
Hot
Model: 23HS30-2804S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-H
Motor ..
A$50.22
Used – 95% New
-20 %
Model: DM542T-USED
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44 A$25.15
Model: 5-ULN2003
This 5-wire, 4-phase unipolar stepper motor features center-tapped coils with a common power connection. It is ideally paired with the ULN2003 Darlington transistor array driver chip.
The combination offers a direct pluggable interface, enabling simple connection to standard development boards for..
A$6.62
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$37.07
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Model: 14RE08-1004S-H
This motor is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temperature reach up to 180Cdegree. This motor is widely used in 3D Printer.
Electrical Specification
Manuf..
A$17.28
-33 %
Model: CN-42PM96M01
Electrical Specification
Manufacturer Part Number: 42PM96M01
Motor Type: PM Stepper
Phase: 2
Step Angle: 3.75deg
Rated Current/phase: 0.42A
Holding Torque: 49mN.m(6.94oz.in)
Detent Torque: 10.78mN.m(2.521oz.in)
Phase Resistance: 12±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$12.30 A$8.24
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in).
Electrical Specification
Manufacturer Part Number: 16HM17-0304S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 25Ncm(..
A$20.00 A$14.00
Model: 23E1KIP65-12
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$106.38
Model: 10PM20L02
Electrical Specification
Manufacturer Part Number: 10PM20L02
Motor Type: PM Stepper
Phase: 2
Step Angle: 18deg
Rated Current/phase: 0.2A
Holding Torque: 1.96mN.m(0.278oz.in)
Detent Torque: 0.98mN.m(0.139oz.in)
Phase Resistance: 26±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: 3..
A$6.16
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders.
Electrical Specification
Manufacturer Part Numb..
A$16.45 A$10.69
Model: 23E1KIP65-20
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283.28oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrica..
A$101.78
Model: 15PM20L01
Electrical Specification
Manufacturer Part Number: 15PM20L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 18deg
Rated Current/phase: 0.04A
Holding Torque: 2.45mN.m(0.347oz.in)
Detent Torque: 0.98mN.m(0.139oz.in)
Phase Resistance: 300±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance:..
A$1.23
Hot
Model: 23IP65-12
This P series Nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
M..
A$69.97
Used – 80% New
-45 %
Model: 16HM12-0634D-USED
This bipolar Nema 16 stepper motor features a compact size of 39.2x39.2x31mm, a step angle of 0.9°, and a 4-wire configuration, with each phase drawing 0.63A. It delivers a robust holding torque of 12Ncm(16.99oz.in), making it ideal for precision motion control applications such as 3D printers, ro..
A$18.82 A$10.35
Model: 20PM20L01
Electrical Specification
Manufacturer Part Number: 20PM20L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 18deg
Rated Current/phase: 0.5A
Holding Torque: 5.88mN.m(0.833oz.in)
Detent Torque: 1.98mN.m(0.28oz.in)
Phase Resistance: 10±10%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: 4..
A$5.74
Hot
Model: 23IP65-20
This P series Nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283,22oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$79.79
Used – 95% New
-59 %
Model: 17HS15-1504S-X1-USED
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm(63.74oz.in).
Electrical Specification
Manufacturer Part Number: 17HS15-1504S-X1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding T..
A$14.61 A$5.92
Model: 20PM20L02
Electrical Specification
Manufacturer Part Number: 20PM20L02
Motor Type: PM Stepper
Phase: 2
Step Angle: 18deg
Rated Current/phase: 0.69A
Holding Torque: 12.25mN.m(1.735oz.in)
Detent Torque: 1.98mN.m(0.28oz.in)
Phase Resistance: 17.5±10%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductanc..
A$5.74
Model: 24E1KIP65-30
This P series closed loop nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electri..
A$115.49
Used – 80% New
-59 %
Model: 17HS16-2004S1-USED
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61 A$5.92
Model: 25PM24L01
Electrical Specification
Manufacturer Part Number: 25PM24L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 15deg
Rated Current/phase: 0.275A
Holding Torque: 12.25mN.m(1.735oz.in)
Detent Torque: 3.92mN.m(0.555oz.in)
Phase Resistance: 16±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductan..
A$5.33
Model: 24IP65-30
This P series Nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$95.39
Model: 25PM48L01
Electrical Specification
Manufacturer Part Number: 25PM48L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 7.5deg
Rated Current/phase: 0.5A
Holding Torque: 14.7mN.m(2.082oz.in)
Detent Torque: 3.92mN.m(0.555oz.in)
Phase Resistance: 10±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$6.16
Model: 34E1KIP65-45
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$143.60
Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 35PM48L01
Electrical Specification
Manufacturer Part Number: 35PM48L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 7.5deg
Rated Current/phase: 0.2A
Holding Torque: 53.9mN.m(7.634oz.in)
Detent Torque: 14.7mN.m(2.082oz.in)
Phase Resistance: 60±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: ..
A$6.77
Model: 34E1KIP65-85
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elec..
A$204.05
Used – 80% New
-58 %
Model: 23HS30-2804S-USED
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
..
A$29.22 A$12.26
Model: 42PM48L01
Electrical Specification
Manufacturer Part Number: 42PM48L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 7.5deg
Rated Current/phase: 0.6A
Holding Torque: 68.6mN.m(9.717oz.in)
Detent Torque: 27.44mN.m(3.887oz.in)
Phase Resistance: 5.8±7%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance..
A$10.26
Model: 34E1KIP65-120
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electric..
A$241.50
Used – 80% New
-53 %
Model: 23HS30-2904S-USED
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.89Nm(267.65oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2904S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holdin..
A$29.22 A$13.68
Used – 90% New
-60 %
Model: 23HS45-4204S-USED
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).
Electrical Specification
Manufacturer Part Number: 23HS45-4204S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg ..
A$45.92 A$18.40
Model: 34IP65-85
This P series Nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
..
A$165.10
Model: 34IP65S-85
The S Series Nema 34 waterproof stepper motor features an IP65 rating, ensuring superior protection against dust and water. With a holding torque of 8.5Nm (1203.94oz.in), it delivers robust performance for demanding applications.
Based on the P series, the waterproof connector was changed to a sta..
A$110.54
Used – 80% New
-61 %
Model: 34HS61-6004S1-USED
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41 A$45.81
Model: 6HS12-0304D
Electrical Specification
Manufacturer Part Number: 6HS12-0304D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.58Ncm(0.82oz.in)
Rated Current/phase: 0.3A
Phase Resistance: 22ohms
Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$104.22
Model: 34IP65-120
This P series Nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specificati..
A$200.08
Hot
Model: 6HS12-0304S
Electrical Specification
Manufacturer Part Number: 6HS12-0304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.58Ncm(0.82oz.in)
Rated Current/phase: 0.3A
Phase Resistance: 22ohms
Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$104.22
Model: 23IP67-12
This P series Nema 23 stepper motor with IP67 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$110.61
Hot
Model: 8HS11-0204S
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in).
Electrical Specification
Manufacturer Part Number: 8HS11-0204S
Motor Type: Bipolar Stepper
Step..
A$25.57
Model: 23IP67-20
This P series Nema 23 stepper motor with IP67 waterproof ratings and 2Nm(254.95oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Specif..
A$120.10
Model: 8HS12-0494H
Electrical Specification
Manufacturer Part Number: 8HS12-0494H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.015Nm(2.12oz.in)
Rated Current/phase: 0.49A
Phase Resistance: 6.9ohms± 10%
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$32.88
Model: 34IP67-45
This P series Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$175.38
Model: 8HS12-0506S
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.2Ncm(1.70oz.in).
Electrical Specification
Manufacturer Part Number: 8HS12-0506S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.2N..
A$25.57
Hot
Model: 8HS13-0604S
Electrical Specification
Manufacturer Part Number: 8HS13-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.8Ncm(2.55oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 5.6ohms
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$27.65
Hot
Model: 8HS15-0304S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A, with holding torque 3Ncm(4.25oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3Ncm(4.25oz.in)
R..
A$26.67
Hot
Model: 8HS15-0604D
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 8HS15-0604D
Motor Type: Bipolar Stepper
Step Angle: ..
A$26.67
Hot
Model: 8HS15-0604S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 4Ncm(5.7oz.in)..
A$26.67
Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in).
Electrical Specification
Manufacturer Part Number: 11HS12-0674D
Motor Type: Bipolar Stepper
Step Angle: 1.8de..
A$16.70
Hot
Model: 11HS12-0674S
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x33mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in).
Electrical Specification
Manufacturer Part Number: 11HS12-0674S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: ..
A$15.65
Model: 11HS12-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x33mm. It has 4 wires and holding torque 7Ncm(9.91oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS12-0704S
Motor ..
A$17.25
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals.
Electrical Specification
Manufacturer Part Number: 11HS12-0956D
Motor Type: Unipolar ..
A$16.70
Model: 11HS13-1004H
Electrical Specification
Manufacturer Part Number: 11HS13-1004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.06Nm(8.5oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 2.1ohms± 10%
Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$25.49
Hot
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A, with holding torque 10Ncm(14.16oz.in).
Electrical Specification
Manufacturer Part Number: 11HS18-0674S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 10N..
A$16.70
Model: 11HS18-1004H
Electrical Specification
Manufacturer Part Number: 11HS18-1004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.075Nm(10.62oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 2.1ohms±10%
Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$26.83
Hot
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in).
Electrical Specification
Manufacturer Part Number: 11HS20-0674D
Motor Type: Bipolar Stepper
Step Angle: 1.8de..
A$18.66
Hot
Model: 11HS20-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Planetary Gearbox is available for this model.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S
Motor Type: Bipolar Step..
A$17.22
Model: 11HS20-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x51mm. It has 4 wires and holding torque 12Ncm(16.99oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS20-0704S
..
A$18.42
Hot
Model: 14HM08-0504S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HM08-0504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 5Ncm(7...
A$16.18
Hot
Model: 14HM11-0404S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x28.2mm. It has 4 wires, each phase draws 0.4A, with holding torque 11Ncm(15.58oz.in).
Electrical Specification
Manufacturer Part Number: 14HM11-0404S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 11..
A$17.95
Hot
Model: 14HR05-0504S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x12.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HR05-0504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Hol..
A$23.06
Hot
Model: 14HR07-1004VRN
Electrical Specification
Manufacturer Part Number: 14HR07-1004VRN
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 9Ncm(12.75oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.9ohms
Inductance: 2.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifications
..
A$22.13
