Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$16.70
Nema 11 Bipolar 1.8deg 7Ncm(9.91oz.in) 0.67A 28x28x33mm 4 Wires
Hot
Model: 11HS12-0674S
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x33mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: ..
A$15.65
Model: 11HS12-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x33mm. It has 4 wires and holding torque 7Ncm(9.91oz.in). It is intended for use with Nema 11 EG series planetary gearboxes. Electrical Specification Manufacturer Part Number: 11HS12-0704S Motor ..
A$17.25
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
A$16.70
Model: 11HS13-1004H
Electrical Specification Manufacturer Part Number: 11HS13-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.06Nm(8.5oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms± 10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$25.49
Nema 11 Bipolar 1.8deg 10Ncm(14.16oz.in) 0.67A 28x28x45mm 4 Wires
Hot
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A, with holding torque 10Ncm(14.16oz.in). Electrical Specification Manufacturer Part Number: 11HS18-0674S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 10N..
A$16.70
Model: 11HS18-1004H
Electrical Specification Manufacturer Part Number: 11HS18-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.075Nm(10.62oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms±10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$26.83
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$18.66
Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Planetary Gearbox is available for this model. Electrical Specification Manufacturer Part Number: 11HS20-0674S Motor Type: Bipolar Step..
A$17.22
Model: 11HS20-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x51mm. It has 4 wires and holding torque 12Ncm(16.99oz.in). It is intended for use with Nema 11 EG series planetary gearboxes. Electrical Specification Manufacturer Part Number: 11HS20-0704S ..
A$18.42
Nema 14 Bipolar 0.9deg 5Ncm(7.08oz.in) 0.5A 35x35x20mm 4 Wires
Hot
Model: 14HM08-0504S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HM08-0504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 5Ncm(7...
A$16.18
Nema 14 Bipolar 0.9deg 11Ncm(15.58oz.in) 0.4A 35x35x28.2mm 4 Wires
Hot
Model: 14HM11-0404S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x28.2mm. It has 4 wires, each phase draws 0.4A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 14HM11-0404S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 11..
A$17.95
Round Nema 14 Bipolar 0.9deg 5Ncm(7.08oz.in) 0.5A Φ36x12.5mm 4 Wires
Hot
Model: 14HR05-0504S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size  Φ36x12.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HR05-0504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Hol..
A$23.06
Round Nema 14 Bipolar 0.9deg 9Ncm(12.75oz.in) 1.0A Φ36x17.5mm 4 Wires for Voron Stealthburner
Hot
Model: 14HR07-1004VRN
Electrical Specification Manufacturer Part Number: 14HR07-1004VRN Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 9Ncm(12.75oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.9ohms Inductance: 2.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications ..
A$22.13
Round Nema 14 Bipolar 0.9deg 8Ncm(11.33oz.in) 0.65A Φ36x19.6mm 4 Wires
Hot
Model: 14HR08-0654S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x19.6mm. It has 4 wires, each phase draws 0.65A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 14HR08-0654S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding To..
A$23.06
Model: 14HR09-0434S-C1
This custom round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x21.5mm. It has 4 wires, each phase draws 0.43A, with holding torque 9.0Ncm(12.75oz.in). A 20 teeth MXL pulley is available, it's a good choice for camera and monitor. Electrical Specification Manufactu..
A$22.43
Nema 14 Bipolar 1.8deg 5Ncm(7.08oz.in) 0.4A 35x35x20mm 4 Wires
Hot
Model: 14HS08-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HS08-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 5Ncm(7..
A$14.61
Nema 14 Bipolar 1.8deg 14Ncm(20oz.in) 0.4A 35x35x26mm 4 Wires
Hot
Model: 14HS10-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A, with holding torque 14Ncm(20oz.in). Electrical Specification Manufacturer Part Number: 14HS10-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 14Ncm(2..
A$14.61
Nema 14 Bipolar 1.8deg 12.5Ncm(17.7oz.in) 1.0A 35x35x28mm 4 Wires
Hot
Model: 14HS11-1004S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x28mm. It has 4 wires, each phase draws 1 A, with holding torque 12.5Ncm(17.7oz.in). Electrical Specification Manufacturer Part Number: 14HS11-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 12.5Nc..
A$16.21
Model: 14HS13-0406S
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.1Nm..
A$13.57
Model: 14HS13-0804D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804D Motor Type: Bipolar Stepper Step Angle: 1.8..
A$14.83
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
Hot
Model: 14HS13-0804S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18Ncm..
A$13.57
Model: 14HS13-0804SH
This bipolar Nema 14 stepper motor with a hollow shaft. The shaft with 5mm OD and 3mm ID, It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804SH Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Tor..
A$19.46
Model: 14HS13-1004S-EGS
This is a 2-phase Nema 14 stepper motor with a 1.8° step angle. Each phase draws 1.0A and allows for holing torque of 18Ncm (25.49oz.in). It has a short shaft length of 10mm that is specifically designed to work with our EGS14 gearboxes. Electrical Specification Manufacturer Part Number: 14HS1..
A$14.48
Model: 14HS14-1254H
Electrical Specification Manufacturer Part Number: 14HS14-1254H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.16Nm(22.66oz.in) Rated Current/phase: 1.25A Phase Resistance: 1.86ohms± 10% Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$23.49
Nema 14 Bipolar 1.8deg 23Ncm(32.57oz.in) 0.5A 35x35x42mm 4 Wires
Hot
Model: 14HS17-0504S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x42mm. It has 4 wires, each phase draws 0.5A, with holding torque 23Ncm(32.57oz.in). Electrical Specification Manufacturer Part Number: 14HS17-0504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 23Nc..
A$16.70
Model: 14HS19-2004H
Electrical Specification Manufacturer Part Number: 14HS19-2004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.33Nm(46.74oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.4ohms±10% Inductance: 2.41mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$34.21
Model: 14HS20-1504D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504D Motor Type: Bipolar Stepper Step Angle: 1...
A$20.88
Nema 14 Bipolar 1.8deg 40Ncm(56.64oz.in) 1.5A 35x35x52mm 4 Wires
Hot
Model: 14HS20-1504S
This Nema 14 stepper motor is the strongest model in Nema 14 size motors, it with step angle 1.8deg and size 35x35x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504S Motor Type: Bipolar Stepper S..
A$23.15
Model: 14RE07-1004VRN
Electrical Specification Manufacturer Part Number: 14RE07-1004VRN Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 8Ncm(11.33oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.9ohms Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$13.26
Model: 16HM09-1204S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x22mm. It has 4 wires, each phase draws 1.2 A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 16HM09-1204S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 11Nc..
A$14.61
Model: 16HM10-0604S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x25mm. It has 4 wires, each phase draws 0.6A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 16HM10-0604S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 16Ncm..
A$14.61
Used - Nema 16 Bipolar 0.9deg 12Ncm(16.99oz.in) 0.63A 39x39x31mm 4 Wires
Used – 80% New -45 %
Model: 16HM12-0634D-USED
This bipolar Nema 16 stepper motor features a compact size of 39.2x39.2x31mm, a step angle of 0.9°, and a 4-wire configuration, with each phase drawing 0.63A. It delivers a robust holding torque of 12Ncm(16.99oz.in), making it ideal for precision motion control applications such as 3D printers, ro..
A$18.82 A$10.35
Model: 16HM13-0404S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 16HM13-0404S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 18Ncm(..
A$15.14
Model: 16HS08-0506S
This unipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 6 wires, each phase draws 0.5A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS08-0506S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 8Nc..
A$13.04
Model: 16HS08-0604S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 4 wires, each phase draws 0.6A, with holding torque 8.0Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS08-0604S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 8.0..
A$13.04
Nema 16 Bipolar 1.8deg 21Ncm(29.74oz.in) 0.4A 39x39x34mm 4 Wires
Hot
Model: 16HS13-0404S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 21Ncm(29.74oz.in). Electrical Specification Manufacturer Part Number: 16HS13-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 21Nc..
A$16.70
Model: 16HS13-0654S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 16HS13-0654S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18..
A$13.57
Model: 16HS16-0304S-C1
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS16-0304S-C1 Motor Type: Bipolar Stepper Step Angle: 1..
A$11.97
E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Hot
Model: 17HE08-1004S
Electrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.09
E Series Nema 17 Bipolar 26Ncm(36.82oz.in) 1.2A 42X42x30mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE12-1204S
Electrical Specification Manufacturer Part Number: 17HE12-1204S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 26Ncm(36.82oz.in) Rated Current/phase: 1.2A Phase Resistance: 2.5ohms Inductance: 3.3mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.26
E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE15-1504S
Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$7.55
Model: 17HE15-1704S
This Nema 17 bipolar stepper motor offers a holding torque of 42Ncm(59.48oz.in) and a 1.8° step angle. Designed for stable and reliable performance, it has a rated current of 1.7A per phase. The motor comes with a 1-meter cable and a 4-pin 2.54mm pitch Harwin female connector for easy plug-and-play ..
A$8.27
E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE19-2004S
Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$10.18
Model: 17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.35
Model: 17HE24-2104S1
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg, a 1m cable & connector and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S1 Motor Type: B..
A$14.35
Model: 17HF24-1805S
This is a 5-phase stepper motor with a rated current of 1.8A and a holding torque of 0.5Nm(70.81oz.in). Compared to 2-phase stepper motors, 5-phase stepper motors have higher resolution, lower vibration, lower noise, etc. It is widely used in printing industry, medical equipment, optoelectronics ind..
A$110.02
Nema 17 Bipolar 0.9deg 11Ncm(15.58oz.in) 1.2A 42x42x22mm 4 Wires
Hot
Model: 17HM08-1204S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x22mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 17HM08-1204S Motor Type: Bipolar StepperStep Angle: 0.9deg Holding Torque:..
A$14.61
Model: 17HM13-0316D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM13-0316D Motor Type: Unipolar Stepper Step ..
A$15.14
Model: 17HM13-0316S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HM13-0316S Motor Type: Unipolar Stepper Step Angle: 0.9deg Holding To..
A$15.14
Model: 17HM15-0406S
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0406S Motor Type: Unipolar Stepper Step Angle: 0.9deg Holding Tor..
A$16.18
Nema 17 Bipolar 0.9deg 36Ncm(51oz.in) 0.9A 42x42x40mm 4 Wires
Hot
Model: 17HM15-0904S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.9A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0904S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: ..
A$19.28
Model: 17HM15-1004S
Electrical Specification Manufacturer Part Number: 17HM15-1004S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 33Ncm(46.74oz.in) Rated Current/phase: 1.0A Phase Resistance: 4.5ohms Inductance: 12.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications ..
A$16.06
Model: 17HM15-1684S
Electrical Specification Manufacturer Part Number: 17HM15-1684S Motor Type: Bipolar Stepper Step Angle: 0.9degHolding Torque: 32Ncm(45.3oz.in) Rated Current/phase: 1.68A Phase Resistance: 1.7ohms Inductance: 4.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications Fr..
A$17.22
Model: 17HM19-0406D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 32Ncm(45.3oz.in), A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM19-0406D Motor Type: Unipolar Stepper Step A..
A$18.26
Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HM19-1684D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94
Used - Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires w/ 0.085m Cable
Used – 80% New -51 %
Model: 17HM19-1684D-USED
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94 A$9.25
Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HM19-1684S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torqu..
A$18.26
Nema 17 Bipolar 0.9deg 46Ncm(65.1oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HM19-2004S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in). Electrical Specification Manufacturer Part Number: 17HM19-2004S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding ..
A$18.26
Full D-cut Shaft Nema 17 Bipolar 0.9deg 46Ncm(65.1oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HM19-2004S1
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in). Electrical Specification Manufacturer Part Number: 17HM19-2004S1 Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torqu..
A$17.22
Nema 17 Bipolar Stepper Motor 1.8deg 16Ncm(22.66oz.in) 1A Extruder Motor 42x42x21.5mm 4 Wires
Hot
Model: 17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor we have, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x21.5mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification M..
A$12.78
Nema 17 Bipolar 1.8deg 13Ncm(18.41oz.in) 0.7A 42x42x25mm 4 Wires
Hot
Model: 17HS10-0704S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 13Ncm(18.41oz.in). Electrical Specification Manufacturer Part Number: 17HS10-0704S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.04
Model: 17HS13-0316S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0316S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding T..
A$13.57
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0404D Motor Type: Bipolar Stepper Step A..
A$14.00
Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404S1
This bipolar Nema 17 stepper motor is one of the most popular model, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification ..
A$13.57
Model: 17HS13-0956D
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0956D Motor Type: Bipolar Stepper Ste..
A$13.57
Model: 17HS13-0956S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.95A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0956S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding T..
A$13.57
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Nema 17 Bipolar 1.8deg 22Ncm(31.15oz.in) 1.33A 42x42x34mm 4 Wires
Hot
Model: 17HS13-1334S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). Electrical Specification Manufacturer Part Number: 17HS13-1334S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.95
Model: 17HS13-1504H
Electrical Specification Manufacturer Part Number: 17HS13-1504H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.25Nm(35.4oz.in) Rated Current/phase: 1.5A Phase Resistance: 1.56ohms ± 10% Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificatio..
A$25.49
Nema 17 Bipolar 1.8deg 40Ncm(56.64oz.in) 0.4A 42x42x39mm 4 Wires
Hot
Model: 17HS15-0404S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.4A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
A$15.68
Nema 17 Unipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x40mm 6 Wires
Hot
Model: 17HS15-0406S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 6 wires, each phase draws 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 26Nc..
A$14.61
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x39mm 4 Wires
Hot
Model: 17HS15-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.85A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: ..
A$14.61
Model: 17HS15-0854S-C1
This nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 0.85A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854S-C1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 36Ncm(5..
A$17.20
Model: 17HS15-0854S-C2
Electrical Specification Manufacturer Part Number: 17HS15-0854S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 36Ncm(51oz.in) Rated Current/phase: 0.85A Phase Resistance: 6.3ohms Inductance: 10mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
A$11.71
Showing 1 to 75 of 215 (3 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments