Model: 34HS46-6004D-E1000
Electrical Specification
Manufacturer Part Number: 34HS46-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 9.0Nm(1274.5oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.40ohms± 10%
Inductance: 3.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$81.94
Model: 34HS61-6004S1
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41
Model: 34HS31-6004S1
Electrical Specification
Manufacturer Part Number: 34HS31-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 4.8Nm(679.74oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.48ohms± 10%
Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$60.02
Model: 34HS46-6004S1
Electrical Specification
Manufacturer Part Number: 34HS46-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1204oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.58ohms± 10%
Inductance: 5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$86.10
Model: 11HS12-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x33mm. It has 4 wires and holding torque 7Ncm(9.91oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS12-0704S
Motor ..
A$17.25
Model: ST-C01
This small stepper motor controller is used for single-axis stepper motors. It has an operating voltage range of 5-30VDC, a wide adjustable speed range, and various built-in fixed operating modes.
Users can select from these modes and set distance, speed, delay, and quantity of motion. The control..
A$29.42
Model: 1-CL86T-P120-V41
This CNC kit included:
1 x 34E1K-120: P Series Nema 34 Closed Loop Stepper Motor 12Nm/1699.34oz.in with Encoder 1000PPR
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor1 x CM2M-18: RV-4 AWG18 1.7m(67") Long Motor Extension Cable wi..
A$235.14
Model: 1-CL57T-P30-V41
This CNC kit included:
1 x 24E1K-30: P Series Nema 24 Closed Loop Stepper Motor 3Nm/424.83oz.in with Encoder 1000CPR
1 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2M: 1.7m(67") Long Encoder Extens..
A$150.38
