Hot
Model: 23HE22-2804S
Electrical Specification
Manufacturer Part Number: 23HE22-2804S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.24Nm(175.6oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms± 10%
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$17.15
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Model: 17HS19-0406S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 0.4A, with holding torque 32Ncm(45.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0406S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 32N..
A$16.70
Hot
Model: 17HS19-1684S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.
Electrical Specification
Manufacturer Part Number: 17HS..
A$16.70
Hot
Model: 17HS19-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A, with holding torque 44Ncm(62.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0854S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torq..
A$16.70
Hot
Model: 16HS13-0404S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 21Ncm(29.74oz.in).
Electrical Specification
Manufacturer Part Number: 16HS13-0404S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 21Nc..
A$16.70
Hot
Model: 14HS17-0504S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x42mm. It has 4 wires, each phase draws 0.5A, with holding torque 23Ncm(32.57oz.in).
Electrical Specification
Manufacturer Part Number: 14HS17-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 23Nc..
A$16.70
Hot
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A, with holding torque 10Ncm(14.16oz.in).
Electrical Specification
Manufacturer Part Number: 11HS18-0674S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 10N..
A$16.70
