Model: 23HS22-2804D-YGS50-AR4
AR4 Upgraded Nema 23 Stepper Motor with YGS Gearbox Gear Ratio 50:1 High Precision Planetary Gearbox
Electrical Specification
Manufacturer Part Number: 23HS22-2804D-YGS50-AR4
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearb..
A$244.03
Model: 34E1KIP65-120
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electric..
A$241.50
Model: 3DM2283T
The 3DM2283T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter aut..
A$238.13
Model: 1-CL86T-P120-V41
This CNC kit included:
1 x 34E1K-120: P Series Nema 34 Closed Loop Stepper Motor 12Nm/1699.34oz.in with Encoder 1000PPR
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor1 x CM2M-18: RV-4 AWG18 1.7m(67") Long Motor Extension Cable wi..
A$235.14
Model: 34E1KBK50-85
Electrical Specification
Manufacturer Part Number: 34E1KBK50-85
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1203.94oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.54ohms
Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Si..
A$233.92
Model: DM2282T
The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto..
A$233.82
Model: 4-DM542Y-S19
This CNC kit includes:
4 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
4 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
1 x S-500-48: 500W 48V 10.5A 115/230V Switching Power Supply
Motor Spec..
A$231.66
Model: 42HS79-8004S
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8.0A, allowing for a huge torque up to 30Nm(4248oz.in).
Electrical Specification
Manufacturer Part Number: 42HS79-8004S
Step Angle: 1.8deg
Holding Torque: 30Nm(4248oz.in)
Rated C..
A$227.23
