Model: 17HS13-0404S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$35.95
Model: 17HS13-0404S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.25Nm(35.40oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$35.95
Used – 95% New
-39 %
Model: 24HS40-5004D-E1000-USED
Electrical Specification
Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.0Nm(566.45oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.6ohms± 10%
Inductance: 2.6mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$58.99 A$35.78
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Model: 23HS18-2004H
Electrical Specification
Manufacturer Part Number: 23HS18-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.78Nm(110.5oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.45ohms± 10%
Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificatio..
A$35.55
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: 23HT22-5503S
Electrical Specification
Manufacturer Part Number: 23HT22-5503S
Number of phase: 3
Step Angle: 1.2deg
Holding Torque: 1Nm(141.64oz.in)
Rated Current/phase: 5.5A
Phase Resistance: 0.45ohms
Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$35.49
Hot
Model: 23HS30-1006S
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 1.0A, with holding torque 1.35Nm(191.2oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-1006S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 1.3..
A$35.49
