Hot
Model: ISD04-10
Electrical Specifications
Manufacturer Part Number: ISD04-10
Step Angle: 1.8deg
Holding Torque: 126Ncm(178.4oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 75mm
Shaft Diameter: Φ6.35m..
A$86.78
Model: ISC04-10
Electrical Specifications
Manufacturer Part Number: ISC04-10
Step Angle: 1.8deg
Holding Torque: 126Ncm(178.4oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.5mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 75mm
Shaft Diameter: Φ6.35m..
A$86.78
Model: 1-DM860I-34HS39
This CNC kit included:
1 x DM860I: Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive
1 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
Motor Specification
Manufacturer Part Number: 34HS39-6004S
Number of phase: 2
Step Angle: 1...
A$86.75
Model: 14HS11-1004D-PG19-AR4
This Nema 14 motor is a closed-loop motor customized for AR4 robotic arm, equipped with a planetary gearbox with a gear ratio of 19:1 and a 1000ppr(4000cpr) magnetic incremental encoder.
Electrical Specification
Manufacturer Part Number: 14HS11-1004D-PG19-AR4
Motor Type: Bipolar Stepper
S..
A$86.45
Model: 34HS46-6004S1
Electrical Specification
Manufacturer Part Number: 34HS46-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1204oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.58ohms± 10%
Inductance: 5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$86.10
Model: 8HS15-0604S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$86.02
Model: 8HS15-0604S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$86.02
Model: DM456AI
The DM456AI has built with a pulser already, you can control two Max current 2.8A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
A$85.90
