Model: 1-CL86Y-S48-V20
This CNC kit includes:
1 x 34HS31-6004D-E1000: Nema 34 Closed Loop Stepper Motor 4.30Nm(608.93oz.in) with Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Motor AWG18 and Encoder Extension..
A$107.38
Model: 14HS13-0804D-PG51-E22-300
Motor Specification
Manufacturer Part Number: 14HS13-0804D-PG51-E22-300
Motor Type: Bipolar Stepper
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 0.14Nm(19.83oz.in)
Rated Current/phase: 1A
Phase Resistance: 3.20ohms
Voltage: 3.20V
Inductance: 4.50mH±20%(1KHz)Insulation..
A$107.23
Model: DM860EC
The DM860EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 20-80VAC/30-110VDC and supporting up to 8.5A current. It features 100Mbps full-duplex EtherCAT communication with CoE(CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position,..
A$106.61
Model: 23BK20-12
Electrical Specification
Manufacturer Part Number: 23BK20-12
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: ..
A$106.45
Model: 23E1KIP65-12
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$106.38
Model: 3-23HE45-4204S
Package includes: 3 x 23HE45-4204S
Electrical Specification
Manufacturer Part Number: 23HE45-4204S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.88ohms± 10%
Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
..
A$106.27
Model: ISC08
The ISC08 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC08, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC08 can provide 3 - 8..
A$105.46
Model: 11HS20-0674D-PG100-E22-300
This NEMA 11 closed-loop stepper motor integrates a 99.548:1 planetary gearbox and a 300ppr optical incremental encoder, delivering high torque and precise positioning even at low speeds. The closed-loop control system ensures accuracy and stability, while the high gear ratio enhances torque output..
A$104.62
