Model: 11HS20-1004D-E1000-PG14
This is a Nema 11 closed-loop stepper motor equipped with a 1000ppr (4000cpr) incremental optical encoder and a 13.73:1 planetary gearbox which ensure Its precise positioning capabilities and high torque delivery at low speeds of the motor and make it widely used in cars, robots, packaging industry,..
A$145.60
Model: 34HS38-4204D-B400
Motor Specification
Manufacturer Part Number: 34HS38-4204D-B400
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 7Nm(1001oz.in)
Rated Current/phase: 4.24A
Voltage: 3.39V
Phase Resistance: 0.8ohms
Inductance: 8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86m..
A$145.44
Model: 23HS22-2904S-EGS50
This Nema 23 stepper motor comes with a holding torque of 1.20Nm(169.93oz.in) and features a 50:1 high-precision EG series planetary gearbox that guarantees a maximum backlash of only 15arcmin, ensuring repeatable and precise motion.
Designed for reliability in rigorous operating conditions, this..
A$145.33
Model: 1-ACLYS65-1M5
This CNC kit includes:
1 x 34HS39-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Trans..
A$143.97
Model: 34E1KIP65-45
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$143.60
Hot
Model: CL57RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can sa..
A$143.17
Model: iCL60-30
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.0Nm(424.83oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$142.69
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
