Hot
Model: 11HS20-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Planetary Gearbox is available for this model.
Electrical Specification
Manufacturer Part Number: 11HS20-0674S
Motor Type: Bipolar Step..
A$17.22
Hot
Model: 17HM19-2004S1
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in).
Electrical Specification
Manufacturer Part Number: 17HM19-2004S1
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torqu..
A$17.22
Model: 17HS15-0854S-C1
This nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 0.85A, with holding torque 36Ncm(51oz.in).
Electrical Specification
Manufacturer Part Number: 17HS15-0854S-C1
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 36Ncm(5..
A$17.20
Model: 17HS08-1004S-H
This motor with a holding torque of 16Ncm(22.7oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$17.15
Hot
Model: 23HE22-2804S
Electrical Specification
Manufacturer Part Number: 23HE22-2804S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.24Nm(175.6oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms± 10%
Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$17.15
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Model: 17HS19-0406S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 0.4A, with holding torque 32Ncm(45.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0406S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 32N..
A$16.70
Hot
Model: 17HS19-1684S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.
Electrical Specification
Manufacturer Part Number: 17HS..
A$16.70
Hot
Model: 17HS19-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A, with holding torque 44Ncm(62.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0854S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torq..
A$16.70
Hot
Model: 16HS13-0404S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 21Ncm(29.74oz.in).
Electrical Specification
Manufacturer Part Number: 16HS13-0404S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 21Nc..
A$16.70
Hot
Model: 14HS17-0504S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x42mm. It has 4 wires, each phase draws 0.5A, with holding torque 23Ncm(32.57oz.in).
Electrical Specification
Manufacturer Part Number: 14HS17-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 23Nc..
A$16.70
Hot
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A, with holding torque 10Ncm(14.16oz.in).
Electrical Specification
Manufacturer Part Number: 11HS18-0674S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 10N..
A$16.70
