Model: 42HS79-8004S1
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification
Manufacturer Part Number: 42HS79-8004S1
Step Angle: 1.8deg
Holdi..
A$187.02
Model: 34HS30-5604S-SG20
This Nema 34 stepper motor is equipped with a spur gearbox. The gear ratio is 20:1 and the max. return difference is 3.5deg. It's a good solution to applications that require reliability, compact design and high torque but low cost.
Electrical Specification
Manufacturer Part Number: 34HS30-5604S..
A$188.18
Model: 34HS30-5604S-SG50
This Nema 34 stepper motor is equipped with a spur gearbox. The gear ratio is 50:1 and the max. return difference is 3deg. It's a good solution to applications that require reliability, compact design and high torque but low cost.
Electrical Specification
Manufacturer Part Number: 34HS30-5604S-S..
A$188.18
Model: 1-CL86T-P45-V41
This CNC kit included:
1 x 34E1K-45: P Series Nema 34 Closed Loop Stepper Motor 4.5Nm/637.25oz.in with Encoder 1000PPR
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor
1 x CM2M-18: RV-4 AWG18 1.7m(67") Long Motor Extension Cable with GX16 A..
A$189.70
Model: 34BK50-85
Electrical Specification
Manufacturer Part Number: 34BK50-85
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1203.94oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.54ohms
Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size:..
A$194.64
Model: 34HS60-6004D-E1000-B700
This is a S series Nema 34 closed loop stepper motor with a holding torque of 12Nm(1699.34oz.in) and rated current of 6.0A. Enquipped with a 1000ppr optical incremental encoder and a 24V 7.0Nm(991.28oz.in) electromagnetic brake, it combines the precision and reliability of closed-loop control with..
A$198.70
Model: 34IP65-120
This P series Nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specificati..
A$200.08
Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Model: 34E1KBK50-45
Electrical Specification
Manufacturer Part Number: 34E1KBK50-45
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 4.5Nm(637.38oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.34ohms
Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Siz..
A$201.89
Model: 34E1KIP65-85
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elec..
A$204.05
Model: 3-DM542T-S30
This CNC kit includs:
3 x DM542T: Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor
3 x 23HS45-4204S: Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
1 x LE-400-36: 400W 36V 11A 115/230V Switching Power Supply
Driver Specification
Pul..
A$204.66
Model: 1-CL86T-P85-V41
This CNC kit included:
1 x 34E1K-85: P Series Nema 34 Closed Loop Stepper Motor 8.5Nm/1203.7oz.in with Encoder 1000PPR
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor
1 x CM2M-18: RV-4 AWG18 1.7m(67") Long Motor Extension Cable w..
A$209.23
