Model: 34IP65S-85
The S Series Nema 34 waterproof stepper motor features an IP65 rating, ensuring superior protection against dust and water. With a holding torque of 8.5Nm (1203.94oz.in), it delivers robust performance for demanding applications.
Based on the P series, the waterproof connector was changed to a sta..
A$110.54
Model: 23IP67-12
This P series Nema 23 stepper motor with IP67 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$110.61
Model: 11HS20-0704S-EGS100
This Nema 11 stepper motor with a holding torque of 12Ncm(16.99oz.in) is equipped with a high-precision planetary gearbox. It has a gear ratio of 100:1 and a maximum backlash of 25arc-min. It is a good solution for applications that require good accuracy and reliability at an exceptional value.
Ele..
A$111.06
Model: iCL42-08
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$111.18
Model: 1-CLYS20
This CNC kit includes:
1 x 23HS30-5004D-E1000: Nema 23 Closed Loop Stepper Motor 2.00Nm(283.22oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching ..
A$111.71
Model: 1-DM860Y-TR48
This CNC kit includes:
1 x 34HS30-6004S: S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
1 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Transformer 220VAC to 70VA..
A$111.86
Model: iDM42-RS06
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$112.14
Model: iDM57-23
This is a Nema 23 integrated stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$113.57
Model: 1-CLYS40-V20
This CNC kit includes:1 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.00Nm(566.45oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor1 x LE-250-48: 250W 48V 5.2A Switching Power Supply1 x CE2-M2-20: 1.7m(..
A$113.58
Model: 23BK20-20
Electrical Specification
Manufacturer Part Number: 23BK20-20
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 2Nm(283.28oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.4ohms
Inductance: 1.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: 57 ..
A$113.65
Model: 17HS15-1684D-HG10-AR4
This Nema 17 geared motor is the Joint 1 motor in AR4 kit. It is integrated with a planetary gearbox of 10:1 gear ratio and a very thin and cost-effective magnetic incremental encoders with 3 channels and 1000PPR(4000CPR) resolution. It's also a good solution to applications that with limited space ..
A$114.51
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
A$114.53
