Hot
Model: 3-17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in).
Package includes: 3 x 17HS24-2104S
Electrical Specification
Manufacturer Part Number: 17HS24-2104S
Mo..
A$53.12
Model: 34HS39-6004S
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x98mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 8.0Nm(1132.89oz.in).
Electrical Specification
Manufacturer Part Number: 34HS39-6004S
Number of phase: 2
Step Angle: 1.8deg
Holding Torque..
A$53.15
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Model: 23HT32-5803S-C1
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Model: 11HS12-0674S-PG5
This Nema 11 single shaft stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS12-0674S..
A$53.36
Hot
Model: 17E1K-07
Electrical Specification
Manufacturer Part Number: 17E1K-07
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 72Ncm(101.96oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.75ohms
Inductance: 4.0mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$53.49
Hot
Model: DM860I
The DM860I is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability that is suitable for Cnc drive . Its motor a..
A$53.55
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Model: 24HS34-5004D-E1000
Electrical Specification
Manufacturer Part Number: 24HS34-5004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(424.83oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.52ohms± 10%
Inductance: 2.1mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$54.00
Model: 11HS20-0674-ME1K
This is one of the thinnest closed loop stepper motor we have, it only with 57.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and hi..
A$54.22
Model: DM556IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$54.24
