Model: 34IP65S-85
The S Series Nema 34 waterproof stepper motor features an IP65 rating, ensuring superior protection against dust and water. With a holding torque of 8.5Nm (1203.94oz.in), it delivers robust performance for demanding applications.
Based on the P series, the waterproof connector was changed to a sta..
A$110.54
Model: 23IP67-12
This P series Nema 23 stepper motor with IP67 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$110.61
Model: 11HS20-0704S-EGS100
This Nema 11 stepper motor with a holding torque of 12Ncm(16.99oz.in) is equipped with a high-precision planetary gearbox. It has a gear ratio of 100:1 and a maximum backlash of 25arc-min. It is a good solution for applications that require good accuracy and reliability at an exceptional value.
Ele..
A$111.06
Model: iCL42-08
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$111.18
Model: 1-CLYS20
This CNC kit includes:
1 x 23HS30-5004D-E1000: Nema 23 Closed Loop Stepper Motor 2.00Nm(283.22oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching ..
A$111.71
Model: 1-DM860Y-TR48
This CNC kit includes:
1 x 34HS30-6004S: S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
1 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Transformer 220VAC to 70VA..
A$111.86
Model: iDM42-RS06
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$112.14
Model: iDM57-23
This is a Nema 23 integrated stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$113.57
Model: 1-CLYS40-V20
This CNC kit includes:1 x 24HS40-5004D-E1000: Nema 24 Closed Loop Stepper Motor 4.00Nm(566.45oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor1 x LE-250-48: 250W 48V 5.2A Switching Power Supply1 x CE2-M2-20: 1.7m(..
A$113.58
Model: 23BK20-20
Electrical Specification
Manufacturer Part Number: 23BK20-20
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 2Nm(283.28oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.4ohms
Inductance: 1.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: 57 ..
A$113.65
Model: 17HS15-1684D-HG10-AR4
This Nema 17 geared motor is the Joint 1 motor in AR4 kit. It is integrated with a planetary gearbox of 10:1 gear ratio and a very thin and cost-effective magnetic incremental encoders with 3 channels and 1000PPR(4000CPR) resolution. It's also a good solution to applications that with limited space ..
A$114.51
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
A$114.53
Model: 34HS59-5004S
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm(1841oz.in).
Electrical Specification
Manufacturer Part Number: 34HS59-5004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 13Nm(1841o..
A$115.42
Model: 24E1KIP65-30
This P series closed loop nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electri..
A$115.49
Model: 8HS11-0204S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.02Nm(2.83oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$116.74
Model: 23HS22-HG20-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG20-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$117.25
Model: 34HS61-6004S1
Electrical Specification
Manufacturer Part Number: 34HS61-6004S1
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 13Nm(1841oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.9ohms± 10%
Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame S..
A$117.41
Model: 1-CLYS30A-V20
This CNC kit includes:1 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching..
A$118.03
Model: 1-DM860Y-TR80
YS Series 1 Axis Stepper CNC Kit 8.0Nm(1132.89oz.in) Nema 34 Stepper Motor & Driver & AC Transformer
This CNC kit includes:
1 x 34HS39-6004S: S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
1 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Transformer 220VAC to 70VAC 50/6..
A$118.06
Model: iCL57-13
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$118.35
Model: iDMD57-21
This is a Nema 23 integrated stepper motor with a holding torque of 2.1Nm(297.38oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$118.35
Model: 23HS22-HG15-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG15-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.3mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$118.38
Model: 1-CLYS30A
This CNC kit includes:
1 x 23HS45-4204D-E1000: Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching ..
A$118.38
Model: 1-CL86Y-S90-V20
This CNC kit includes:
1 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Motor AWG18 and Encoder Extension Cab..
A$118.51
Model: 23HS22-HG50-E1000
Electrical Specification
Manufacturer Part Number: 23HS22-HG50-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.5ohms
Inductance: 1.7mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame..
A$118.62
Model: 34HS46-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 8.5Nm(1203.70oz.in), rated current of 6.0A and 161mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure th..
A$118.62
Model: 1-CL86Y-S65-V20
This CNC kit includes:
1 x 34HS39-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Exte..
A$118.67
Model: 1-CL86Y-S90
This CNC kit includes:
1 x 34HS46-6004D-E1000: Nema 34 Closed Loop Stepper Motor 9.00Nm(1274.50oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Motor AWG18 and Encoder Extension Cable
..
A$118.85
Model: 34HP44-6004S
Electrical Specification
Manufacturer Part Number: 34HP44-6004S
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 8.2Nm(1161.22oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.55ohms± 10%
Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fra..
A$119.57
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: iDM42-RS08
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$119.78
Model: 24HS34-5004D-E1000-B280
This is a S series Nema 24 closed loop stepper motor with a holding torque of 3.0Nm(424.92oz.in) and rated current of 5.0A. Enquipped with a 1000ppr optical incremental encoder and a 24V 2.8Nm(396.51oz.in) electromagnetic brake, it combines the precision and reliability of closed-loop control with..
A$119.94
Model: 23IP67-20
This P series Nema 23 stepper motor with IP67 waterproof ratings and 2Nm(254.95oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Specif..
A$120.10
Model: 1-DM860I-S80
This CNC kit included:
1 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
1 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Motor Specification
Manufa..
A$120.13
Model: 8HS15-0604S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$120.75
Model: 34E1K-85
Electrical Specification
Manufacturer Part Number: 34E1K-85
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 8.5Nm(1203.7oz.in)
Rated Current/phase: 6.0A
Phase Resistance: 0.54ohms
Inductance: 5.0mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$121.94
Model: 34HS27-4004D-B400
Motor Specification
Manufacturer Part Number: 34HS27-4004D-B400
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 3.4Nm(481oz.in)
Rated Current/phase: 4.0A
Voltage: 2.8V
Phase Resistance: 0.7ohms
Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86..
A$122.70
Model: 1-CL86T-S48-V41
Items in Kit
1 x 34HS31-6004D-E1000: 4.3Nm Closed loop stepper motor
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m motor and encoder extension cables1 x CABLE-PC-1: RS232 Debugging Cable
Motor Spe..
A$123.02
Model: 1-CL42T-P05-V41
This CNC kit included:
1 x 17E1K-05: P Series Nema 17 Closed Loop Stepper Motor 48Ncm/67.97oz.in with Encoder 1000CPR
1 x CL42T-V41: Closed Loop Stepper Driver V4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
1 x CE2M: 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepper Motor
..
A$123.84
Model: 1-CL86Y-S120-1M5-V20
This CNC kit includes:
1 x 34HS59-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in)Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor1 x CABLE-PC-2: RS232 debugging cable
Motor ..
A$124.54
Hot
Model: 1-CL86Y-S120-1M5
This CNC kit includes:
1 x 34HS59-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in)Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
Motor Specification
Manufacturer Part Number: 34H..
A$124.90
Model: 1-CLTS20-V41
Items in Kit
1 x 23HS30-5004D-E1000: 2.0Nm Closed loop stepper motor
1 x CL57T-V41: Nema 23/Nema 24 Closed loop stepper motor driver V4.1
1 x LRS-200-36: MEAN WELL 200W 36VDC 5.9A 115/230VAC Enclosed Switching Power Supply1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2-M2-20: 1.7m motor and enco..
A$126.00
Model: 1-CLYS30S-V20
This CNC kit includes:1 x 23HS40-5004D-E1000: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)1 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor1 x LE-250-48: 250W 48V 5.2A 115/230V Switching Power Supply1 ..
A$126.42
Model: 24BK20-30
Electrical Specification
Manufacturer Part Number: 24BK20-30
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3Nm(424.92oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.43ohms
Inductance: 1.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size: 60..
A$126.75
Model: iCL42-RS06
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.4Nm(56.64oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$126.93
Model: iDM57-RS13
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$126.93
Model: 1-CL42T-P07-V41
This CNC kit included:
1 x 17E1K-07: P Series Nema 17 Closed Loop Stepper Motor 72Ncm/101.98oz.in with Encoder 1000PPR
1 x CL42T-V41: Closed Loop Stepper DriverV4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
1 x CE2M: 1.7m(67") Long Encoder Extension Cable for Closed Loop Stepp..
A$127.02
Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 34HS59-5004D
Moto..
A$127.17
Model: iCL57-23
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$127.89
Model: iDMD57-31
This is a Nema 23 integrated stepper motor with a holding torque of 3.1Nm(439oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact size ..
A$127.89
Model: iDM60-30
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm. At very compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.
The iDM series are reliable and affordable and performs e..
A$127.89
Hot
Model: 23HS22-2804S-HG10
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 54mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG10
Motor Type:..
A$127.90
Hot
Model: 23HS22-2804S-HG5
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 54mm Planetary gearbox of 5:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG5
Motor Type: B..
A$128.99
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 1-CLTS40-V41
Items in Kit
1 x 24HS40-5004D-E1000: 4.0Nm Closed loop stepper motor
1 x CL57T-V41: Nema 23/Nema 24 Closed loop stepper motor driver V4.1
1 x LE-250-48: 250W 48V 5.2A Switching Power Supply driver
1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2-M2-20: 1.7m motor and encoder extension cables
..
A$130.19
Model: 1-CL86Y-S120-V20
This CNC kit includes:
1 x 34HS59-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in)Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Ext..
A$131.22
Model: 1-CLYS30
This CNC kit includes:
1 x 23HS40-5004D-E1000: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR)
1 x CL57Y: Y Series Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor
1 x LE-201-36: 201W 36V 5.9A 115/230V Switching Power Supply
1..
A$131.58
Brand: Leadshine
Model: 3DM883
Suitable for a wide range of 3-phase stepper motors, from NEMA frame size 23 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the 3DM883 an ideal solution for applications that ..
A$131.71
Model: 17E1KBK05-05
Electrical Specification
Manufacturer Part Number: 17E1KBK05-05
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 48Ncm(67.99oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.35ohms
Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$131.71
Model: 1-CL86Y-S120
This CNC kit includes:
1 x 34HS59-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 12.00Nm(1699.34oz.in)Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Extension Ca..
A$131.98
Model: 1-CLTS30-V41
Items in Kit
1 x 24HS34-5004D-E1000: 3.0Nm Closed loop stepper motor
1 x CL57T-V41: Nema 23/Nema 24 Closed loop stepper motor driver V4.11 x CABLE-PC-1: RS232 Debugging Cable
1 x LRS-200-36: 201W 36V 5.5A Switching Power Supply driver
1 x CE2-M2-20: 1.7m motor and encoder extension cables
..
A$132.46
Model: iCLD57-21
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$132.66
Model: 1-CL57T-P12-V41
This CNC kit included:
1 x 23E1K-12: P Series Nema 23 Closed Loop Stepper Motor 1.2Nm/169.93oz.in with Encoder 1000PPR
1 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2M: 1.7m(67") Long Encode..
A$133.34
Model: 23HS30-2804S-HG10
This Nema 23 stepper motor with 76mm body and 2.80A rated current, integrated with a 54mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS30-2804s-HG10
Motor T..
A$133.39
Model: iCL42-RS08
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$134.10
Model: 17E1KBK05-07
Electrical Specification
Manufacturer Part Number: 17E1KBK05-07
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 72Ncm(101.98oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.75ohms
Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Siz..
A$134.46
Model: 1-CLTS30A-V41
Items in Kit
1 x 23HS45-4204D-E1000: 3.0Nm Closed loop stepper motor
1 x CL57T-V41: Nema 23/Nema 24 Closed loop stepper motor driver V4.1
1 x LRS-200-36: 200W 36V 5.9A Enclosed Switching Power Supply1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2-M2-20: 1.7m motor and encoder extension cab..
A$135.07
Model: 1-CL86T-S90-V41
Items in Kit
1 x 34HS46-6004D-E1000: 9.0Nm Closed loop stepper motor
1 x CL86T-V41: Closed Loop Stepper Driver V4.1 0~8.0A 18~80VAC/24~110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m motor and encoder extension cables1 x CABLE-PC-1: RS232 Debugging Cable
Motor Specifi..
A$135.25
Model: 1-DM860Y-TR120
This CNC kit includes:
1 x 34HS59-6004S: S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
1 x DM860Y: Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Transformer 2..
A$135.54
Model: 1-CLYS48-V20
This CNC kit includes:
1 x 34HS31-6004D-E1000: Nema 34 Closed Loop Stepper Motor 4.30Nm(608.93oz.in) with Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supp..
A$135.98
Model: iDM57-RS23
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$136.48
Model: 17HS15-1684D-HG50-AR4
This Nema 17 geared motor is the Joint 3 motor in AR4 kit. It is integrated with a planetary gearbox of 50:1 gear ratio and a very thin and cost-effective magnetic incremental encoders with 3 channels and 1000PPR(4000CPR) resolution. It's also a good solution to applications that with limited space ..
A$136.56
Model: 1-CLYS65-1M5-V20
This CNC kit includes:
1 x 34HS39-6004D-E1K-1M5: Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y-V20: Y Series Closed Loop Stepper Driver V2.0 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply1..
A$137.25
Model: 1-DM860I-S120
This CNC kit included:
1 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
1 x 34HS59-6004S: Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Motor Specif..
A$137.60
Model: iDM60-35
This is a Nema 24 integrated stepper motor with a holding torque of 3.5Nm(495.64oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$137.90
Model: ISC08-30
Electrical Specifications
Manufacturer Part Number: ISC08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10m..
A$138.40
Model: ISD08-30
Electrical Specifications
Manufacturer Part Number: ISD08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10mm
..
A$138.40
Model: 1-CL57T-P20-V41
This CNC kit included:
1 x 23E1K-20: P Series Nema 23 Closed Loop Stepper Motor 2.0Nm/283.22oz.in with Encoder 1000CPR
1 x CL57T-V41: Closed Loop Stepper Driver V4.1 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor1 x CABLE-PC-1: RS232 Debugging Cable
1 x CE2M: 1.7m(67") Long Encoder..
A$138.56
Model: 34HS61-6004D-B700
This is a Nema 34 stepper motor with a 24V 6.8W electromagnetic brake. The motor comes with a holding torque of 13.0Nm(1840.95oz.in), rated current of 6.0A and 199mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure t..
A$138.62
Model: 11HS12-1004D-E1000-PG27
This is a Nema 11 closed-loop stepper motor that consists of a 1000ppr (4000cpr) incremental optical encoder and a planetary gearbox that has a gear ratio of 26.85:1. Its compact size, accurate positioning capabilities and high torque delivery at low speeds make it widely used in cars, robots, packa..
A$139.47
Model: 11HS12-1004D-E1000-PG5
This is a Nema 11 closed loop stepper motor equipped with a 1000ppr(4000cpr) incremental optical encoder and a 5.18:1 planetary gearbox. The built-in encoder and gearbox ensure precise positioning capabilities and high torque delivery at low speeds of the motor. Motor Specification
Manufacturer P..
A$139.47
-35 %
Model: CN-23HS22-2804-HG50-ME1K
Electrical Specification
Manufacturer Part Number: 23HS22-2804-HG50-ME1K
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque without Gearbox: 102Ncm(144.44oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 0.9ohms
Inductance: 2.8mH±20%(1KHz)
Gearbox Specifications
Gearbox ..
A$215.68 A$140.19
Model: 1-CL86Y-S65
This CNC kit includes:
1 x 34HS39-6004D-E1000: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x CE2-M2-18: 1.7m(67") Long Encoder and Motor Extension Cab..
A$140.56
Model: 23E1KBK20-12
Electrical Specification
Manufacturer Part Number: 23E1KBK20-12
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 1.2Nm(169.97oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.45ohms
Inductance: 1.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Siz..
A$141.04
Model: iCL57-RS13
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$141.73
Model: 11HS12-1004D-E1000-PG100
This is a Nema 11 closed loop stepper motor with a 99.548:1 planetary gearbox and a 1000ppr(4000cpr) incremental optical encoder.
Its compact size, accurate positioning capabilities and high torque make it perfect for applications that have limited spaces and require high precision and high torque..
A$141.81
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
Model: iCL60-30
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.0Nm(424.83oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$142.69
Hot
Model: CL57RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can sa..
A$143.17
Model: 34E1KIP65-45
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$143.60
Model: 1-ACLYS65-1M5
This CNC kit includes:
1 x 34HS39-6004D-E1K-1M5: S Series Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x TR250-A70-A220: 250VA Single-phase Square Control Trans..
A$143.97
Model: 23HS22-2904S-EGS50
This Nema 23 stepper motor comes with a holding torque of 1.20Nm(169.93oz.in) and features a 50:1 high-precision EG series planetary gearbox that guarantees a maximum backlash of only 15arcmin, ensuring repeatable and precise motion.
Designed for reliability in rigorous operating conditions, this..
A$145.33
Model: 34HS38-4204D-B400
Motor Specification
Manufacturer Part Number: 34HS38-4204D-B400
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 7Nm(1001oz.in)
Rated Current/phase: 4.24A
Voltage: 3.39V
Phase Resistance: 0.8ohms
Inductance: 8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 86 x 86m..
A$145.44
Model: 11HS20-1004D-E1000-PG14
This is a Nema 11 closed-loop stepper motor equipped with a 1000ppr (4000cpr) incremental optical encoder and a 13.73:1 planetary gearbox which ensure Its precise positioning capabilities and high torque delivery at low speeds of the motor and make it widely used in cars, robots, packaging industry,..
A$145.60
Model: 11HS20-1004D-E1000-PG5
This is a Nema 11 closed loop stepper motor that is consist of a 1000ppr(4000cpr) incremental optical encoder and a planetary gearbox with a gear ratio of 5.18:1. The built-in encoder and gearbox make the motor perfect for applications that have limited spaces and require accurate positioning capabi..
A$145.60
Model: 1-CLYS65-1M5
This CNC kit includes:
1 x 34HS39-6004D-E1K-1M5: Nema 34 Closed Loop Stepper Motor 6.50Nm(920.48oz.in) Encoder 1000PPR(4000CPR)
1 x CL86Y: Y Series Closed Loop Stepper Driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 Stepper Motor
1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
Mo..
A$146.50
Model: 17HS15-1684D-EG10-AR4
This geared motor is the J1 motor in AR4-MK3 kit. It is integrated with a higher precision planetary gearbox of 10:1 gear ratio and a encoder with 3 channels and 1000PPR(4000CPR) resolution. It has higher precision and can also meet the higher requirements for other applications.
Electrical Specifi..
A$146.74
Model: 23HS22-2804S-HG100
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 76mm Planetary gearbox of 100:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG100
Motor Typ..
A$146.94
Model: 23HS22-2804S-HG15
This Nema 23 stepper motor with 55mm body and 2.8A rated current, integrated with a 61.65mm Planetary gearbox of 15:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 23HS22-2804S-HG15
Motor Ty..
A$146.94
