Model: iCL57-13
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$118.35
Model: iCL42-RS08
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$134.10
Model: iCL42-RS06
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.4Nm(56.64oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$126.93
Model: iCL42-08
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$111.18
Model: iCL42-06
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm(84.96oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.6Nm(84.96oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$103.55
Model: iCL42-03
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.3Nm(42.48oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.3Nm(42.48oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$98.78
Model: DM860IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0.1–6.0A and an operating voltage of 24–110VDC, making it ideal for Nema 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance at co..
A$74.82
Model: DM556IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$54.24
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: Y-USB-CL
Handheld Intelligent Setting Unit for CL57Y & CL86Y...
A$14.38
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Hot
Model: 17HM19-2004S1
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in).
Electrical Specification
Manufacturer Part Number: 17HM19-2004S1
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torqu..
A$17.22
