Model: 11HS20-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x51mm. It has 4 wires and holding torque 12Ncm(16.99oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS20-0704S
..
A$18.42
Model: 11HS12-0704S
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x33mm. It has 4 wires and holding torque 7Ncm(9.91oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS12-0704S
Motor ..
A$17.25
Model: 11HS12-1004D-E1000-EGS
This is a Nema 11 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 1.0A, a 10mm shaft length, and a holding torque of 0.06Nm(8.5oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and ..
A$79.57
Model: 11HS20-1004D-E1000-EGS
This is a Nema 11 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 1.0A, a 10mm shaft length, and a holding torque of 0.14Nm(19.83oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, an..
A$84.53
Model: 17HS15-1584S
This short shaft Nema 17 stepper motor with 9.5mm length shaft, motor size is 42x42x39mm. It has 4 wires, each phase draws current 1.58A, with holding torque 36Ncm(51oz.in).
Electrical Specification
Manufacturer Part Number: 17HS15-1584S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Hold..
A$13.57
Model: 23HS30-2904S
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.9Nm(269.06oz.in).
Electrical Specification
Manufacturer Part Number: 23HS30-2904S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding..
A$29.22
Model: ST-C01
This small stepper motor controller is used for single-axis stepper motors. It has an operating voltage range of 5-30VDC, a wide adjustable speed range, and various built-in fixed operating modes.
Users can select from these modes and set distance, speed, delay, and quantity of motion. The control..
A$29.42
Model: ST-C02
This compact integrated stepper motor driver and controller is designed for single-axis stepper motors, featuring a wide operating voltage range of 10–30VDC and a broad speed adjustment range. It comes with multiple built-in fixed operation modes and integrates drive and control functions into a c..
A$38.51
