Model: 17HM19-0406D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 32Ncm(45.3oz.in), A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HM19-0406D
Motor Type: Unipolar Stepper
Step A..
A$18.26
Model: 17HS13-0956D
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HS13-0956D
Motor Type: Bipolar Stepper
Ste..
A$13.57
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 23HS22-280..
A$28.29
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification
Manufacturer Part Number: 23HS30-2804D
Motor Type: Bipolar Stepper
Step Angle:..
A$38.90
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
Manufacturer Part Number: 23HS16-2804D
Motor Type: Bipolar Stepp..
A$21.92
Model: 23HS30-2694D
Electrical Specification
Manufacturer Part Number: 23HS30-2694D
Number Of Phase: 2
Step Angle: 1.8deg
Holding Torque: 1.85Nm(261.98oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.1ohms± 10%
Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Fram..
A$30.27
Hot
Model: 23HS45-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification
Manufacturer Part Number: 23HS45-4204D
..
A$60.59
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
