Model: 20PM20L01
Electrical Specification
Manufacturer Part Number: 20PM20L01
Motor Type: PM Stepper
Phase: 2
Step Angle: 18deg
Rated Current/phase: 0.5A
Holding Torque: 5.88mN.m(0.833oz.in)
Detent Torque: 1.98mN.m(0.28oz.in)
Phase Resistance: 10±10%ohms(20℃)Insulation Class: B 130°C[266°F]
Inductance: 4..
A$5.74
Model: 18HR06-1004S
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16mm. It has 4 wires, each phase draws 1A, with holding torque 9Ncm(12.75oz.in).
Electrical Specification
Manufacturer Part Number: 18HR06-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 9..
A$32.02
Hot
Model: 17ME15-1504S
Electrical Specification
Manufacturer Part Number: 17ME15-1504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 30Ncm(42.48oz.in)
Rated Current/phase: 1.50A
Phase Resistance: 2.0ohms
Inductance: 5.2mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$9.42
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
Hot
Model: 17HS26-2304S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67mm. It has 4 wires, each phase draws 2.3A, with holding torque 79Ncm(111.896oz.in).
Electrical Specification
Manufacturer Part Number: 17HS26-2304S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 79..
A$36.99
Hot
Model: 17HS24-2104S-PG5
This Nema 17 stepper motor with 60mm body and 2.1A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS24-2104S-PG5
Motor Ty..
A$50.35
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
A$29.41
Hot
Model: 17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in).
Electrical Specification
Manufacturer Part Number: 17HS24-2104S
Motor Type: Bipolar Stepper
Step Angle:..
A$21.18
Model: 17HS24-2104D-B025
Motor Specification
Manufacturer Part Number: 17HS24-2104D-B025
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.65Nm(92.07oz.in)
Rated Current/phase: 2.10A
Voltage: 3.36V
Phase Resistance: 1.6ohms
Inductance: 3.00mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 42..
A$78.18
Hot
Model: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A, with holding torque 65Ncm(92oz.in).
Electrical Specification
Manufacturer Part Number: 17HS24-2104D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
..
A$20.88
Model: 17HS24-2104-ME1K
This nema 17 closed loop stepper motor with 63.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$34.90
Hot
Model: 17HS24-2004D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 2.0A, and a holding torque of 80Ncm(113.29oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better r..
A$32.05
Model: 17HS24-2004D-B070
This is a Nema 17 stepper motor with a 24V 3.7W electromagnetic brake. The motor comes with a holding torque of 0.72Nm(101.96oz.in), rated current of 2.0A and 91mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure tha..
A$49.54
Model: 17HS24-2004-ME1K
This Nema 17 closed-loop stepper motor delivers a holding torque of 80Ncm(113.29oz·in) and features a compact body length of 64.5mm. It integrates a high-resolution magnetic encoder with 3-channel output and 1000PPR(4000CPR), ensuring precise motion feedback.
The key advantages of the magnetic en..
A$28.86
Model: 17HS24-1206S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 1.2A, with holding torque up to 65Ncm(92oz.in).
Electrical Specification
Manufacturer Part Number: 17HS24-1206S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6..
A$23.78
Model: 17HS24-1206D
Electrical Specification
Manufacturer Part Number: 17HS24-1206D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 65Ncm(92oz.in)
Rated Current/phase: 1.2A
Phase Resistance: 6.0ohms
Inductance: 7.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifications
Fr..
A$24.32
Hot
Model: 17HS24-0644S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 0.60A, with holding torque 65Ncm(92.05oz.in).
Electrical Specification
Manufacturer Part Number: 17HS24-0644S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 65N..
A$21.18
Model: 17HS19-2504S-H-V6
This NEMA 17 stepper motor features a 38mm-long, 5mm-diameter shaft and comes with a 1-meter cable terminated in a 2.54mm JST-XH connector.
With a step angle of 1.8°, it provides a holding torque of 55Ncm(77.93oz-in) and a rated current of 2.5A per phase. Built with Class H insulation, it can reli..
A$22.67
Model: 17HS19-2504S-H-V5
This NEMA 17 stepper motor features an 80mm shaft with a 5mm diameter, delivering a precise 1.8° step angle and a high holding torque of 55Ncm(77.93oz-in). With a rated current of 2.5A per phase, it comes with a 1m cables.
Built with Class H insulation, the motor operates reliably in tempera..
A$23.28
Model: 17HS19-2504S-H-V2
This NEMA 17 stepper motor features an 8mm diameter shaft with a precise 1.8-degree step angle and 55Ncm(77.93oz.in) holding torque. Delivering 2.5A per phase, it comes equipped with a 55mm round shaft and 1m cables.
The motor boasts Class H insulation, enabling reliable operation in environments ..
A$25.73
Hot
Model: 17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$21.44
Model: 17HS19-2504S-H
This custom-made high temperature rated NEMA 17 stepper motor is special for VORON printers. It offers a 1.8 degree step angle and high torque with a 48mm body length for use in environments up to 180C.
Electrical Specification
Manufacturer Part Number: 17HS19-2504S-H
Motor Type: Bipolar S..
A$28.78
Model: 17HS19-2504S
This Nema 17 bipolar stepper motor features a step angle of 1.8 degrees and compact dimensions of 42x42x48mm.
It is equipped with 4 wires, delivers 2.5A per phase, and provides a holding torque of 60Ncm(84.97oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2504S
Motor..
A$15.92
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Model: 17HS19-2004S1-H
This motor with a holding torque of 59Ncm(83.6oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$26.03
Hot
Model: 17HS19-2004S1
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) . Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC an..
A$15.39
Model: 17HS19-2004D-E1K
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 2.0A, and a holding torque of 52Ncm(73.64oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, and better re..
A$30.00
Model: 17HS19-2004D-B070
This is a Nema 17 stepper motor with a 24V 3.7W electromagnetic brake. The motor comes with a holding torque of 0.52Nm(73.64oz.in), rated current of 2.0A and 79mm body length.
The built-in electromagnetic brake realizes the function of frequently starting and stopping a stepper motor to ensure that..
A$46.82
Model: 17HS19-2004D-B025
Motor Specification
Manufacturer Part Number: 17HS19-2004D-B025
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.59Nm(83.57oz.in)
Rated Current/phase: 2.00A
Voltage: 2.80V
Phase Resistance: 1.4ohms
Inductance: 3.00mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Size: 42..
A$75.90
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2004D
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
..
A$16.70
Hot
Model: 17HS19-2004-ME1K
This nema 17 closed loop stepper motor with 51.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.
Electr..
A$30.00
Hot
Model: 17HS19-1684S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.
Electrical Specification
Manufacturer Part Number: 17HS..
A$16.70
Model: 17HS19-1684S-PG5X
This Nema 17 stepper motor with 48mm body, 1850mm cable and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque
Electrical Specification
Manufacturer Part Number: 17HS19..
A$48.78
Hot
Model: 17HS19-1684S-PG51
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S-PG51
Motor ..
A$48.27
Hot
Model: 17HS19-1684S-PG5
This Nema 17 stepper motor with 48mm body, 500mm cable and 1.68A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S..
A$46.18
Hot
Model: 17HS19-1684S-PG27
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S-PG27
Motor..
A$48.27
Hot
Model: 17HS19-1684S-PG19
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 19.203:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S-PG19
Moto..
A$46.18
Hot
Model: 17HS19-1684S-PG14
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S-PG14
Motor..
A$46.18
Hot
Model: 17HS19-1684S-PG100
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 17HS19-1684S-PG100
Mot..
A$48.27
Model: 17HS19-1684S-MG50
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 50:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$47.28
Model: 17HS19-1684S-MG5
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 5:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectivene..
A$38.56
Model: 17HS19-1684S-MG20
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 20:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$47.28
Model: 17HS19-1684S-MG100
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 100:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effective..
A$47.28
Model: 17HS19-1684S-MG10
This Nema 17 stepper motor delivers a holding torque of 0.52Nm(73.64oz.in) and features our high-precision MG series gearbox with a 10:1 gear ratio. Unlike the EG series' steel gears, the MG series utilizes durable powder metallurgy gears, offering an optimal balance of precision and cost-effectiven..
A$38.56
Model: 17HS19-1684S-HG20
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated with a 48.3mm Planetary gearbox of 20:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 17HS19-1684S-HG20
Motor..
A$99.90
Model: 17HS19-1684S-HG10
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Electrical Specification
Part Number: 17HS19-1684S-HG10
Motor T..
A$80.14
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available.
Electrical Specification
Manufacturer Part Number: 17HS19-1684D
Motor..
A$16.70
Model: 17HS19-1504H
Electrical Specification
Manufacturer Part Number: 17HS19-1504H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.36Nm(51oz.in)
Rated Current/phase: 1.5A
Phase Resistance: 1.56ohms± 10%
Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$28.18
Hot
Model: 17HS19-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A, with holding torque 44Ncm(62.3oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-0854S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torq..
A$16.70
