Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Hot
Model: CL57Y
This is Y series closed loop stepper driver 0-7.0A 24-50VDC for Nema 17, 23, 24 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than ..
A$48.62
Model: CL57TE
The CL57TE stepper driver offers significant advantages with its wide 5V-24V control signal compatibility, eliminating the need for manual voltage switching. It features intelligent auto-adjusting output current that can be configured via software without manual intervention. The package includes ..
A$51.31
Hot
Model: CL57T-V41
This CL57T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and ..
A$58.22
Hot
Model: CL57T
This closed-loop stepper driver 0-8.0A 24-48VDC for Nema 17, 23, 24 stepper motor offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fu..
A$54.98
Hot
Model: CL57RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can sa..
A$143.17
Model: CL57PR
This is a closed-loop stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–5.0A and an operating voltage of 20–50VDC, making it ideal for Nema 17, 23, 24 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combi..
A$87.90
Model: CL57EC
The CL57EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 24-50VDC input, adjustable current up to 7.2A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple digital i..
A$95.38
Model: CL42Y-V20
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an..
A$57.98
Hot
Model: CL42T-V41
CL42T-V41 is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ experience in stepper and servo controls...
A$58.22
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders.
Electrical Specification
Manufacturer Part Numb..
A$16.45 A$10.69
Model: 8HS22-0804D-E1000
Electrical Specification
Manufacturer Part Number: 8HS22-0804D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.054Nm(7.65oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 8.5ohms± 10%
Inductance: 4.4mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$96.96
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Hot
Model: 8HS15-0604S-PG64
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG64
Motor Type:..
A$68.51
Hot
Model: 8HS15-0604S-PG5
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 4.75:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG5
Motor Type..
A$68.51
Hot
Model: 8HS15-0604S-PG19
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG19
Motor Typ..
A$68.51
Model: 8HS15-0604S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS5
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, w..
A$86.02
Model: 8HS15-0604S-EGS20
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Model: 8HS15-0604S-EGS100
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$120.75
Model: 8HS15-0604S-EGS10
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 10:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$86.02
Hot
Model: 8HS15-0604S
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in).
Electrical Specification
Manufacturer Part Number: 8HS15-0604S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 4Ncm(5.7oz.in)..
A$26.67
Model: 8HS15-0604D-E1000
This is a Nema 8 closed loop stepper motor, equipped with an 1000ppr(4000cpr) incremental optical encoder, has a rated current of 0.6A and a holding torque of 0.02Nm(2.83oz.in). It offers improved accuracy, higher torque, reduced motor heating, lower power consumption, and better response to externa..
A$82.05
