Model: 8HS15-0604S-EGS50
This Nema 8 stepper motor comes with a holding torque of 0.04Nm(5.66oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 50:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, ..
A$103.38
Hot
Model: 8HS15-0604S-PG19
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG19
Motor Typ..
A$68.51
Hot
Model: 8HS15-0604S-PG5
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 4.75:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG5
Motor Type..
A$68.51
Hot
Model: 8HS15-0604S-PG64
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 64:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG64
Motor Type:..
A$68.51
Hot
Model: 8HS15-0604S-PG90
This Nema 8 stepper motor with 38mm body and 0.6A rated current, integrated a planetary gearbox of 90.25:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 8HS15-0604S-PG90
Motor Ty..
A$68.51
Model: 8HS22-0804D-E1000
Electrical Specification
Manufacturer Part Number: 8HS22-0804D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 0.054Nm(7.65oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 8.5ohms± 10%
Inductance: 4.4mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
..
A$96.96
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders.
Electrical Specification
Manufacturer Part Numb..
A$16.45 A$10.69
Hot
Model: CL42T-V41
CL42T-V41 is a closed loop stepper driver designed to solve the loss of step problem in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced control algorithm of based on its tens of years’ experience in stepper and servo controls...
A$58.22
