Model: 11HS20-0704S-EGS100
This Nema 11 stepper motor with a holding torque of 12Ncm(16.99oz.in) is equipped with a high-precision planetary gearbox. It has a gear ratio of 100:1 and a maximum backlash of 25arc-min. It is a good solution for applications that require good accuracy and reliability at an exceptional value.
Ele..
A$111.06
Model: 11HS20-0704S-EGS20
This Nema 11 stepper motor comes with a holding torque of 0.12Nm(16.99oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved..
A$93.68
Model: 11HS20-0704S-EGS5
This Nema 11 stepper motor comes with a holding torque of 0.12Nm(16.99oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$76.30
Model: 11HS20-0704S-EGS50
This Nema 11 stepper motor with a holding torque of 12Ncm(16.99oz.in) is equipped with a high-precision planetary gearbox. It has a gear ratio of 50:1 and a maximum backlash of 20arc-min. It is a good solution for applications that require high accuracy and reliability at an exceptional value.
Elec..
A$93.68
Model: 11HS20-0714S-PG51
This Nema 11 stepper motor with 51mm body and 0.71A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 11HS20-0714S-PG51
Moto..
A$58.46
Model: 11HS20-1004D-E1000
This is a Nema 11 closed loop stepper motor, equipped with an 1000ppr(4000cpr) incremental optical encoder, has a rated current of 1.0A and a holding torque of 0.14Nm(19.83oz.in). It offers improved accuracy, higher torque, reduced motor heating, lower power consumption, and better response to exter..
A$84.53
Model: 11HS20-1004D-E1000-EGS
This is a Nema 11 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder rated at 1.0A, a 10mm shaft length, and a holding torque of 0.14Nm(19.83oz.in). Compared with open-loop stepper motors, it has higher precision, higher torque, less motor heat, lower power consumption, an..
A$84.53
Model: 11HS20-1004D-E1000-PG14
This is a Nema 11 closed-loop stepper motor equipped with a 1000ppr (4000cpr) incremental optical encoder and a 13.73:1 planetary gearbox which ensure Its precise positioning capabilities and high torque delivery at low speeds of the motor and make it widely used in cars, robots, packaging industry,..
A$145.60
Model: 11HS20-1004D-E1000-PG5
This is a Nema 11 closed loop stepper motor that is consist of a 1000ppr(4000cpr) incremental optical encoder and a planetary gearbox with a gear ratio of 5.18:1. The built-in encoder and gearbox make the motor perfect for applications that have limited spaces and require accurate positioning capabi..
A$145.60
Model: 11HS20-1004D-E1000-PG51
This is a Nema 11 closed loop stepper motor combined with a 1000ppr (4000cpr) incremental optical encoder and a planetary gearbox with a gear ratio of 51.89:1. The built-in encoder, gearbox and compact size make the motor ideal for applications required limited space, precise positioning capabiliti..
A$147.94
Hot
Model: 14HM08-0504S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HM08-0504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 5Ncm(7...
A$16.18
Hot
Model: 14HM11-0404S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x28.2mm. It has 4 wires, each phase draws 0.4A, with holding torque 11Ncm(15.58oz.in).
Electrical Specification
Manufacturer Part Number: 14HM11-0404S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 11..
A$17.95
Hot
Model: 14HR05-0504S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x12.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HR05-0504S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Hol..
A$23.06
Hot
Model: 14HR07-1004VRN
Electrical Specification
Manufacturer Part Number: 14HR07-1004VRN
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding Torque: 9Ncm(12.75oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.9ohms
Inductance: 2.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specifications
..
A$22.13
Hot
Model: 14HR08-0654S
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x19.6mm. It has 4 wires, each phase draws 0.65A, with holding torque 8Ncm(11.33oz.in).
Electrical Specification
Manufacturer Part Number: 14HR08-0654S
Motor Type: Bipolar Stepper
Step Angle: 0.9deg
Holding To..
A$23.06
Model: 14HR09-0434S-C1
This custom round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x21.5mm. It has 4 wires, each phase draws 0.43A, with holding torque 9.0Ncm(12.75oz.in). A 20 teeth MXL pulley is available, it's a good choice for camera and monitor.
Electrical Specification
Manufactu..
A$22.43
Hot
Model: 14HS08-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm(7.08oz.in).
Electrical Specification
Manufacturer Part Number: 14HS08-0404S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 5Ncm(7..
A$14.61
Hot
Model: 14HS10-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A, with holding torque 14Ncm(20oz.in).
Electrical Specification
Manufacturer Part Number: 14HS10-0404S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 14Ncm(2..
A$14.61
Model: 14HS11-1004-ME1K
This is the thinnest closed loop stepper motor we have, it only with 34.5mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher co..
A$50.24
Model: 14HS11-1004D-EGS20-AR4
This motor is an upgraded version of motor 14HS11-1004D-PG19-AR4 and is the J6 motor in and AR4-MK3 kit. It is integrated with a higher precision planetary gearbox of 20:1 gear ratio and an encoder with 3 channels and 1000PPR(4000CPR) resolution. It has higher precision and can also meet the higher ..
A$158.02
Model: 14HS11-1004D-ME1K-PG19
This is a Nema 14 closed-loop motor equipped with a 19.203:1 planetary gearbox and a 1000ppr(4000cpr) magnetic incremental encoder. The built-in encoder and gearbox ensure precise positioning capabilities and high torque delivery at low speeds of the motor. Its high precision can also meet the high ..
A$75.76
Model: 14HS11-1004D-PG19-AR3
Electrical Specification
Manufacturer Part Number: 14HS11-1004D-PG19-AR3
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque without Gearbox: 0.125Nm(17.7oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.5 ohms
Inductance: 3.5mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
..
A$55.57
Model: 14HS11-1004D-PG19-AR4
This Nema 14 motor is a closed-loop motor customized for AR4 robotic arm, equipped with a planetary gearbox with a gear ratio of 19:1 and a 1000ppr(4000cpr) magnetic incremental encoder.
Electrical Specification
Manufacturer Part Number: 14HS11-1004D-PG19-AR4
Motor Type: Bipolar Stepper
S..
A$86.45
Hot
Model: 14HS11-1004S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x28mm. It has 4 wires, each phase draws 1 A, with holding torque 12.5Ncm(17.7oz.in).
Electrical Specification
Manufacturer Part Number: 14HS11-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 12.5Nc..
A$16.21
Model: 14HS13-0406S
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2oz.in).
Electrical Specification
Manufacturer Part Number: 14HS13-0406S
Motor Type: Unipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.1Nm..
A$13.57
Model: 14HS13-0804D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in).
Electrical Specification
Manufacturer Part Number: 14HS13-0804D
Motor Type: Bipolar Stepper
Step Angle: 1.8..
A$14.83
Model: 14HS13-0804D-E22-300
Motor Specification
Manufacturer Part Number: 14HS13-0804D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.18Nm(25.5oz.in)
Rated Current/phase: 0.80A
Voltage: 5.40V
Phase Resistance: 6.80ohms
Inductance: 10.00mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Si..
A$58.96
Model: 14HS13-0804D-PG19
This Nema 14 stepper motor with 34mm body and 0.80A rated current, integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804D-PG19
..
A$55.87
Model: 14HS13-0804D-PG5-E22-300
Motor Specification
Manufacturer Part Number: 14HS13-0804D-PG5-E22-300
Motor Type: Bipolar Stepper
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 0.14Nm(19.83oz.in)
Rated Current/phase: 1A
Phase Resistance: 3.20ohms
Voltage: 3.20V
Inductance: 4.50mH±20%(1KHz)Insulation ..
A$95.74
Model: 14HS13-0804D-PG51
This Nema 14 stepper motor with 34mm body and 1.00A rated current, integrated a planetary gearbox of 51.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804D-PG51
M..
A$57.62
Model: 14HS13-0804D-PG51-E22-300
Motor Specification
Manufacturer Part Number: 14HS13-0804D-PG51-E22-300
Motor Type: Bipolar Stepper
Step Angle without Gearbox: 1.8deg
Holding Torque without Gearbox: 0.14Nm(19.83oz.in)
Rated Current/phase: 1A
Phase Resistance: 3.20ohms
Voltage: 3.20V
Inductance: 4.50mH±20%(1KHz)Insulation..
A$107.23
Hot
Model: 14HS13-0804S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in).
Electrical Specification
Manufacturer Part Number: 14HS13-0804S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 18Ncm..
A$13.57
Hot
Model: 14HS13-0804S-PG100
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG100
Moto..
A$57.62
Model: 14HS13-0804S-PG14
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 13.73:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG14
Motor ..
A$55.87
Hot
Model: 14HS13-0804S-PG19
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 19.19:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG19
Motor ..
A$55.87
Model: 14HS13-0804S-PG27
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG27
Motor ..
A$57.62
Hot
Model: 14HS13-0804S-PG5
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG5
Motor ..
A$55.87
Model: 14HS13-0804S-PG51
This Nema 14 stepper motor with 34mm body and 1.0A rated current, integrated a planetary gearbox of 50.9:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque.
Electrical Specification
Manufacturer Part Number: 14HS13-0804S-PG51
Motor..
A$57.62
Model: 14HS13-0804SH
This bipolar Nema 14 stepper motor with a hollow shaft. The shaft with 5mm OD and 3mm ID, It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in).
Electrical Specification
Manufacturer Part Number: 14HS13-0804SH
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$19.46
Model: 14HS13-1004S-EGS
This is a 2-phase Nema 14 stepper motor with a 1.8° step angle. Each phase draws 1.0A and allows for holing torque of 18Ncm (25.49oz.in). It has a short shaft length of 10mm that is specifically designed to work with our EGS14 gearboxes.
Electrical Specification
Manufacturer Part Number: 14HS1..
A$14.48
Model: 14HS13-1004S-EGS100
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly im..
A$92.64
Model: 14HS13-1004S-EGS15
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 15:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved..
A$92.64
Model: 14HS13-1004S-EGS20
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 20:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly imp..
A$92.64
Model: 14HS13-1004S-EGS45
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 45:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly imp..
A$92.64
Model: 14HS13-1004S-EGS5
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 5:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved,..
A$45.01
Model: 14HS14-1254H
Electrical Specification
Manufacturer Part Number: 14HS14-1254H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.16Nm(22.66oz.in)
Rated Current/phase: 1.25A
Phase Resistance: 1.86ohms± 10%
Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specificati..
A$23.49
Hot
Model: 14HS17-0504S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x42mm. It has 4 wires, each phase draws 0.5A, with holding torque 23Ncm(32.57oz.in).
Electrical Specification
Manufacturer Part Number: 14HS17-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 23Nc..
A$16.70
Model: 14HS19-2004H
Electrical Specification
Manufacturer Part Number: 14HS19-2004H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.33Nm(46.74oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.4ohms±10%
Inductance: 2.41mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification..
A$34.21
Model: 14HS20-1504D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in).
Electrical Specification
Manufacturer Part Number: 14HS20-1504D
Motor Type: Bipolar Stepper
Step Angle: 1...
A$20.88
Model: 14HS20-1504D-E22-300
Motor Specification
Manufacturer Part Number: 14HS20-1504D-E22-300
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 0.40Nm(56.64oz.in)
Rated Current/phase: 1.50A
Voltage: 4.20V
Phase Resistance: 2.80ohms
Inductance: 3.80mH ± 20%(1KHz)Insulation Class: B 130°C[266°F]
Frame Si..
A$70.45
