Model: DM556IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$54.24
Model: DM556PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
A$114.53
Hot
Model: DM556T
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20 - 50VDC..
A$36.67
Model: DM556TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quality..
A$28.80
Hot
Model: DM556Y
This Y series digital stepper driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$29.92
Model: DM860EC
The DM860EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 20-80VAC/30-110VDC and supporting up to 8.5A current. It features 100Mbps full-duplex EtherCAT communication with CoE(CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position,..
A$106.61
Hot
Model: DM860I
The DM860I is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability that is suitable for Cnc drive . Its motor a..
A$53.55
Model: DM860IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0.1–6.0A and an operating voltage of 24–110VDC, making it ideal for Nema 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance at co..
A$74.82
Model: DM860PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0 - 6.0A and an operating voltage of 24 - 110VDC, making it ideal for Nema 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high perfor..
A$91.63
Hot
Model: DM860T
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter au..
A$61.98
Model: DM860TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quali..
A$47.84
Model: DM860Y
This Y series digital stepper driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effec..
A$50.50
Brand: Leadshine
Model: DM870
The DM870 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA23, 24 and 34 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$97.82
Model: DM882RS
This is Modbus RS485 stepper driver 2.1-8.2A 18-80VAC or 30-110VDC for Nema 34 stepper motor. DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save ad..
A$157.47
Model: ESS17-04
Electrical Specifications
Manufacturer Part Number: ESS17-04
Holding Torque: 0.48Nm(68oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differenti..
A$67.17
Model: ESS17-07
Electrical Specifications
Manufacturer Part Number: ESS17-07
Holding Torque: 0.6Nm(85oz.in)
Input Voltage: 24 - 36VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 0.8 - 2.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differentia..
A$70.45
Model: ESS17-RS04
ESS Series 0.48Nm(68.00oz.in) Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000PPR
The NEMA 17 integrated stepper motor features a holding torque of 0.48Nm(68oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and reli..
A$86.83
Model: ESS17-RS07
The NEMA 17 integrated stepper motor features a holding torque of 0.72Nm(101.96oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and relia..
A$90.10
Model: ESS23-10
Electrical Specifications
Manufacturer Part Number: ESS23-10
Holding Torque: 1.2Nm(169.93oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differe..
A$75.36
Model: ESS23-20
Electrical Specifications
Manufacturer Part Number: ESS23-20
Holding Torque: 2.2Nm(311.55oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current: 10mA
Logic Input Voltage: 5V
Encoder Type: Incremental
Encoder Output Type: Differe..
A$81.90
Model: ESS23-RS10
The NEMA 23 integrated stepper motor features a holding torque of 1.2Nm(169.93oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and r..
A$95.02
Model: ESS23-RS20
The NEMA 23 integrated stepper motor features a holding torque of 2.2Nm(311.55oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000PPR incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.
This compact and r..
A$101.57
Model: ESS24-30
Electrical Specifications
Manufacturer Part Number: ESS24-30
Holding Torque: 3.0Nm(424.83oz.in)
Input Voltage: 24 - 50VDCInsulation Class: B 130°C[266°F]
Output Peak Current: 1.8 - 4.0A
Logic Input Current:10mA
Logic Input Voltage:5V
Encoder Type: Incremental
Encoder Output Type: Different..
A$96.66
Model: iCL42-03
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.3Nm(42.48oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.3Nm(42.48oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$98.78
Model: iCL42-06
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm(84.96oz.in) 20-36VDC w/ 14-bit Encoder
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.6Nm(84.96oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$103.55
Model: iCL42-08
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$111.18
Model: iCL42-RS06
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.4Nm(56.64oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$126.93
Model: iCL42-RS08
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$134.10
Model: iCL57-13
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system re..
A$118.35
Model: iCL57-23
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$127.89
Model: iCL57-RS13
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$141.73
Model: iCL57-RS23
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$151.28
Model: iCL60-30
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.0Nm(424.83oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$142.69
Model: iCL60-35
This is a Nema 24 integrated closed loop stepper motor with a holding torque of 3.5Nm(495.64oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$152.22
Model: iCLD57-21
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$132.66
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
Model: iDM42-03
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce ..
A$85.42
Model: iDM42-06
This is a Nema 17 integrated stepper motor with a holding torque of 0.6Nm(84.97oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact si..
A$89.23
Model: iDM42-08
This is a Nema 17 integrated stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. Its compact s..
A$96.40
Model: iDM42-RS06
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$112.14
Model: iDM42-RS08
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$119.78
Model: iDM57-13
This is a Nema 23 integrated stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact siz..
A$103.55
Model: iDM57-23
This is a Nema 23 integrated stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$113.57
Model: iDM57-RS13
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the P..
A$126.93
Model: iDM57-RS23
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$136.48
Model: iDM60-30
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm. At very compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.
The iDM series are reliable and affordable and performs e..
A$127.89
Model: iDM60-35
This is a Nema 24 integrated stepper motor with a holding torque of 3.5Nm(495.64oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$137.90
Model: iDMD57-21
This is a Nema 23 integrated stepper motor with a holding torque of 2.1Nm(297.38oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$118.35
Model: iDMD57-31
This is a Nema 23 integrated stepper motor with a holding torque of 3.1Nm(439oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact size ..
A$127.89
