Model: 4-17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$76.85
Model: 17HF24-1805S
This is a 5-phase stepper motor with a rated current of 1.8A and a holding torque of 0.5Nm(70.81oz.in). Compared to 2-phase stepper motors, 5-phase stepper motors have higher resolution, lower vibration, lower noise, etc. It is widely used in printing industry, medical equipment, optoelectronics ind..
A$110.02
Model: 17E15S1684DB4-350RS-H
This linear stepper motor consists of a Nema 17 motor and a lead screw and has a body length of 40mm, a step angle of 1.8 degrees and a rated current of 1.68A. It is equipped with a 350mm long Tr8x4 threaded rod and a POM screw nut move along the threaded rod. This motor has insulation class H and i..
A$80.24
Model: 17HS19-2504S-H-V6
This NEMA 17 stepper motor features a 38mm-long, 5mm-diameter shaft and comes with a 1-meter cable terminated in a 2.54mm JST-XH connector.
With a step angle of 1.8°, it provides a holding torque of 55Ncm(77.93oz-in) and a rated current of 2.5A per phase. Built with Class H insulation, it can reli..
A$22.67
Hot
Model: 17HS19-2504S-H-V1
This NEMA 17 stepper motor features a 1.8-degree step angle, a holding torque of 55Ncm(77.93oz.in), and draws 2.5A per phase. It comes equipped with a 55mm round shaft and 1m cables.
This motor boasts an insulation class of H, making it suitable for operating environments up to 180°C. It is special..
A$21.44
Model: 17HS19-2504S-H-V2
This NEMA 17 stepper motor features an 8mm diameter shaft with a precise 1.8-degree step angle and 55Ncm(77.93oz.in) holding torque. Delivering 2.5A per phase, it comes equipped with a 55mm round shaft and 1m cables.
The motor boasts Class H insulation, enabling reliable operation in environments ..
A$25.73
Model: 17HS19-2504S-H-V5
This NEMA 17 stepper motor features an 80mm shaft with a 5mm diameter, delivering a precise 1.8° step angle and a high holding torque of 55Ncm(77.93oz-in). With a rated current of 2.5A per phase, it comes with a 1m cables.
Built with Class H insulation, the motor operates reliably in tempera..
A$23.28
Model: 23HT32-5803S-C1
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
Model: 23E1KIP65-12
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$106.38
Model: 23E1KIP65-20
This P series closed loop nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283.28oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrica..
A$101.78
Hot
Model: 23IP65-12
This P series Nema 23 stepper motor with IP65 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
M..
A$69.97
Hot
Model: 23IP65-20
This P series Nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283,22oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$79.79
Model: 24E1KIP65-30
This P series closed loop nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electri..
A$115.49
Model: 24IP65-30
This P series Nema 24 stepper motor with IP65 waterproof ratings and 3Nm(424.92oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
Man..
A$95.39
Model: 34E1KIP65-120
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electric..
A$241.50
Model: 34E1KIP65-45
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elect..
A$143.60
Model: 34E1KIP65-85
This P series closed loop nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Elec..
A$204.05
Model: 34IP65-120
This P series Nema 34 stepper motor with IP65 waterproof ratings and 12Nm(1700oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specificati..
A$200.08
Model: 34IP65-45
This P series Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specif..
A$129.86
Model: 34IP65-85
This P series Nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.
Electrical Specification
..
A$165.10
Hot
Model: 17IP67-06
This P series Nema 17 stepper motor has an IP67 waterproof rating and 0.59Nm (83.57oz.in) holding torque. Compared with the IP65 motor, IP67 can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
..
A$35.76
Model: 23IP67-12
This P series Nema 23 stepper motor with IP67 waterproof ratings and 1.2Nm(169.97oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$110.61
Model: 23IP67-20
This P series Nema 23 stepper motor with IP67 waterproof ratings and 2Nm(254.95oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Specif..
A$120.10
Model: 34IP67-45
This P series Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes.
Electrical Spec..
A$175.38
Model: 23HT22-5503S
Electrical Specification
Manufacturer Part Number: 23HT22-5503S
Number of phase: 3
Step Angle: 1.2deg
Holding Torque: 1Nm(141.64oz.in)
Rated Current/phase: 5.5A
Phase Resistance: 0.45ohms
Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F]
Physical Specification
Frame Size..
A$35.49
Model: 18HR06-1004S
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16mm. It has 4 wires, each phase draws 1A, with holding torque 9Ncm(12.75oz.in).
Electrical Specification
Manufacturer Part Number: 18HR06-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 9..
A$32.02
Model: 34IP65S-85
The S Series Nema 34 waterproof stepper motor features an IP65 rating, ensuring superior protection against dust and water. With a holding torque of 8.5Nm (1203.94oz.in), it delivers robust performance for demanding applications.
Based on the P series, the waterproof connector was changed to a sta..
A$110.54
Model: 35VR26-3005S
This is a 5-phase variable reluctance motor with a rated current of 3.0A and a holding torque of 3.2Nm(453.16oz.in). Its simplicity of construction, ability to operate efficiently at high speeds, and high power density make it suitable for applications that require easy assembly and maintenance, hig..
A$88.45
Model: 14RE08-1004S-H
This motor is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temperature reach up to 180Cdegree. This motor is widely used in 3D Printer.
Electrical Specification
Manuf..
A$17.28
Model: 16HS16-0304S-C1
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with holding torque 8Ncm(11.33oz.in).
Electrical Specification
Manufacturer Part Number: 16HS16-0304S-C1
Motor Type: Bipolar Stepper
Step Angle: 1..
A$11.97
Model: 17HS08-1004S-H
This motor with a holding torque of 16Ncm(22.7oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$17.15
Model: 17HS19-2004S1-H
This motor with a holding torque of 59Ncm(83.6oz.in) is designed for high temperature application. We have customized motor's winding, bearing, magnetic steel and also the plastic skeleton to achieve insulation class of H, the temprature reach up to 180C degree. This motor is widely used in 3D Print..
A$26.03
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
A$29.41
Model: 17HS19-2504S-H
This custom-made high temperature rated NEMA 17 stepper motor is special for VORON printers. It offers a 1.8 degree step angle and high torque with a 48mm body length for use in environments up to 180C.
Electrical Specification
Manufacturer Part Number: 17HS19-2504S-H
Motor Type: Bipolar S..
A$28.78
Hot
Model: 23HS30-2804S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-H
Motor ..
A$50.22
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$37.07
Model: 24HR04-1004S
This bipolar pancake Nema 24 stepper motor with step angle 1.8deg and size Φ60x9.6mm. It has 4 wires, each phase draws 1A, with holding torque 6Ncm(8.5oz.in).
Electrical Specification
Manufacturer Part Number: 24HR04-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 6N..
A$37.63
Model: Vacuum-Rated
Vacuum Rated Stepper Motor
Suitable for use in vacuum/high/low temperature environments
Vacuum level: Max. 1.0x10^-7Pa
Radiation resistant: 10^6Gy
Low outgassing rate
Power consumption optimized design
Heat dissipation compliant
Low vibration
Withstand high amplitude vibration
Traceabilit..
A$0.00
Showing 1 to 39 of 39 (1 Pages)
