Model: iCLD57-21
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system r..
A$132.66
Model: iCL42-RS08
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up ..
A$134.10
Model: iDM57-RS23
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the ..
A$136.48
Model: iDM60-35
This is a Nema 24 integrated stepper motor with a holding torque of 3.5Nm(495.64oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of STEPPERONLINE based on its tens of years' experience in stepper and servo controls. At very compact si..
A$137.90
Model: ISC08-30
Electrical Specifications
Manufacturer Part Number: ISC08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10m..
A$138.40
Model: ISD08-30
Electrical Specifications
Manufacturer Part Number: ISD08-30
Step Angle: 1.8deg
Holding Torque: 300Ncm(425oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.9ohms
Inductance: 3.8mH ± 20%(1KHz)
Physical Specifications
Frame Size: 57 x 57mm
Body Length: 133mm
Shaft Diameter: Φ10mm
..
A$138.40
Model: iCL57-RS13
This is a Nema 23 integrated RS485 closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up t..
A$141.73
Model: iCLD57-31
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reli..
A$142.69
