Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 34HS38-4204D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 6.8Nm(962.96oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS38-4204D M..
A$55.02
Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS59-5004D Moto..
A$127.17
Model: 34HS46-5004D1
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS46-5004D1 Mo..
A$52.18
Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS31-5504D M..
A$51.84
Full D-cut Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Full D-cut Shaft Nema 17 Bipolar 0.9deg 46Ncm(65.1oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HM19-2004S1
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in). Electrical Specification Manufacturer Part Number: 17HM19-2004S1 Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torqu..
A$17.22
Model: 14RE07-1004VRN
Electrical Specification Manufacturer Part Number: 14RE07-1004VRN Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 8Ncm(11.33oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.9ohms Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$13.26
E Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x114mm 4 Wires
Hot
Model: 34HE45-6004S
Electrical Specification Manufacturer Part Number: 34HE45-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.51ohms± 10% Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$58.18
Showing 73 to 80 of 215 (27 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments