Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS31-5504D M..
A$51.84
Full D-cut Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS19-2004S2
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, ..
A$17.12
Full D-cut Shaft Nema 17 Bipolar 0.9deg 46Ncm(65.1oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HM19-2004S1
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm(65.1oz.in). Electrical Specification Manufacturer Part Number: 17HM19-2004S1 Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torqu..
A$17.22
Model: 14RE07-1004VRN
Electrical Specification Manufacturer Part Number: 14RE07-1004VRN Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 8Ncm(11.33oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.9ohms Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$13.26
E Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x114mm 4 Wires
Hot
Model: 34HE45-6004S
Electrical Specification Manufacturer Part Number: 34HE45-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.51ohms± 10% Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$58.18
E Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Hot
Model: 34HE31-6004S
Electrical Specification Manufacturer Part Number: 34HE31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.42ohms± 10% Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$44.78
E Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Hot
Model: 34HE59-6004S
Electrical Specification Manufacturer Part Number: 34HE59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$76.16
E Series Nema 23 Stepper Motor Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x54mm 4 Wires
Hot
Model: 23HE22-2804S
Electrical Specification Manufacturer Part Number: 23HE22-2804S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 1.24Nm(175.6oz.in) Rated Current/phase: 2.8A Phase Resistance: 0.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame..
A$17.15
E Series Nema 23 Bipolar 1.8deg 3.0Nm(425oz.in) 4.2A 57x57x113mm 4 Wires
Hot
Model: 23HE45-4204S
Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$36.83
E Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HE30-2804S
Electrical Specification Manufacturer Part Number: 23HE30-2804S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 2.0Nm(283.22oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.17ohms± 10% Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$23.44
Model: 17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.35
E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE19-2004S
Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$10.18
E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE15-1504S
Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$7.55
E Series Nema 17 Bipolar 26Ncm(36.82oz.in) 1.2A 42X42x30mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE12-1204S
Electrical Specification Manufacturer Part Number: 17HE12-1204S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 26Ncm(36.82oz.in) Rated Current/phase: 1.2A Phase Resistance: 2.5ohms Inductance: 3.3mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.26
E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Hot
Model: 17HE08-1004S
Electrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.09
E Series Nema 17 Bipolar 0.9deg 30Ncm(42.48oz.in) 1.5A 42x42x38mm 4 Wires
Hot
Model: 17ME15-1504S
Electrical Specification Manufacturer Part Number: 17ME15-1504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 30Ncm(42.48oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.0ohms Inductance: 5.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$9.42
Dual Shaft Nema 8 Bipolar 4Ncm(5.7oz.in) 0.6A 20x20x38mm 4 Wires
Hot
Model: 8HS15-0604D
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 8HS15-0604D Motor Type: Bipolar Stepper Step Angle: ..
A$26.67
Model: 6HS12-0304D
Electrical Specification Manufacturer Part Number: 6HS12-0304D Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.58Ncm(0.82oz.in) Rated Current/phase: 0.3A Phase Resistance: 22ohms Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$104.22
Model: 42HS79-8004D
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 42HS79-8004D Step An..
A$227.23
Model: 34HS26-2006D
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unip..
A$50.50
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Elect..
A$63.66
Model: 23HS22-1006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS22-1006D Motor Type: Unipolar Step..
A$25.04
Model: 23HS30-3006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm(191.2oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 23HS30-3006D Motor Type: Un..
A$35.49
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 1.26Nm(178.4oz.in) 3A 57x57x56mm 8 Wires
Hot
Model: 23HS22-3008D
This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 0.9Nm(127.5oz.in) with unipolar connection and 1.26Nm(178.4oz...
A$25.04
Model: 23HS18-2004H
Electrical Specification Manufacturer Part Number: 23HS18-2004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.78Nm(110.5oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.45ohms± 10% Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificatio..
A$35.55
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Dual Shaft Nema 23 Bipolar 2.8Nm(396.51oz.in) 4.2A 57x57x113mm 4 Wires
Hot
Model: 23HS45-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS45-4204D ..
A$60.59
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS16-2804D Motor Type: Bipolar Stepp..
A$21.92
Dual Shaft Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification Manufacturer Part Number: 23HS30-2804D Motor Type: Bipolar Stepper Step Angle:..
A$38.90
Dual Shaft Nema 23 Bipolar 1.2Nm(169.9oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS22-280..
A$28.29
Dual Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2004D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$16.70
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
Hot
Model: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.61
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A, with holding torque 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-2104D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$20.88
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS19-1684D Motor..
A$16.70
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Model: 14HS14-1254H
Electrical Specification Manufacturer Part Number: 14HS14-1254H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.16Nm(22.66oz.in) Rated Current/phase: 1.25A Phase Resistance: 1.86ohms± 10% Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$23.49
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
A$16.70
Model: 11HS13-1004H
Electrical Specification Manufacturer Part Number: 11HS13-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.06Nm(8.5oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms± 10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$25.49
Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$16.70
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$18.66
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HS19-2004S1
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Model: 5-17HE19-2004S
Package includes: 5 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$46.86
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HE15-1504S
Package includes: 5 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HS19-2004S1
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
Model: 3-23HS30-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Package includes: 3 x 23HS30-2804S Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type:..
A$79.79
Model: 3-17HS15-1504S-X1
Package includes: 3 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 3-17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in). Package includes: 3 x 17HS24-2104S Electrical Specification Manufacturer Part Number: 17HS24-2104S Mo..
A$53.12
Model: 3-23HE45-4204S
Package includes: 3 x 23HE45-4204S Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$106.27
Model: 3-17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Package includes: 3 x 17HE24-2104S Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor ..
A$43.06
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HE19-2004S
Package includes: 3 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$28.13
Model: 3-17HE15-1504S
Package includes: 3 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$20.85
Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404S1
This bipolar Nema 17 stepper motor is one of the most popular model, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification ..
A$13.57
Nema 17 Bipolar Stepper Motor 1.8deg 16Ncm(22.66oz.in) 1A Extruder Motor 42x42x21.5mm 4 Wires
Hot
Model: 17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor we have, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x21.5mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification M..
A$12.78
Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76.5mm 4 Wires
Hot
Model: 23HS30-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg..
A$29.22
Nema 23 Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.24Nm(175.6oz.in). Electrical Specification Manufacturer Part Number: 23HS22-2804S Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$21.39
Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS19-2004S1
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) . Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC an..
A$15.39
Nema 8 Bipolar 1.8deg 1.4Ncm(1.98oz.in) 0.2A 20x20x27.3mm 4 Wires
Hot
Model: 8HS11-0204S
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in). Electrical Specification Manufacturer Part Number: 8HS11-0204S Motor Type: Bipolar Stepper Step..
A$25.57
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
Hot
Model: 14HS13-0804S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18Ncm..
A$13.57
Nema 17 Bipolar 0.9deg 11Ncm(15.58oz.in) 1.2A 42x42x22mm 4 Wires
Hot
Model: 17HM08-1204S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x22mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 17HM08-1204S Motor Type: Bipolar StepperStep Angle: 0.9deg Holding Torque:..
A$14.61
Nema 17 Bipolar 1.8deg 13Ncm(18.41oz.in) 0.7A 42x42x25mm 4 Wires
Hot
Model: 17HS10-0704S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 13Ncm(18.41oz.in). Electrical Specification Manufacturer Part Number: 17HS10-0704S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.04
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS16-2004S1
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61
Nema 17 Bipolar 1.8deg 40Ncm(56.64oz.in) 0.4A 42x42x39mm 4 Wires
Hot
Model: 17HS15-0404S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.4A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
A$15.68
Model: 8HS12-0494H
Electrical Specification Manufacturer Part Number: 8HS12-0494H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.015Nm(2.12oz.in) Rated Current/phase: 0.49A Phase Resistance: 6.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$32.88
Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76.5mm 4 Wires Φ6mm Shaft
Hot
Model: 23HS30-2804S1
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.85Nm(261.98oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S1 Motor Type: Bipolar Stepper Step ..
A$35.49
Model: 17HS24-1206S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 1.2A, with holding torque up to 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-1206S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 6..
A$23.78
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0404D Motor Type: Bipolar Stepper Step A..
A$14.00
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
Hot
Model: 23HS33-4008D
This nema 23 stepper motor with step angle 1.8deg, a holding torque(bipolar) of 2.83Nm(400oz.in), a holding torque(unipolar) of 2.0Nm(283oz.in) and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you w..
A$42.85
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Used - Short Shaft Nema 23 Bipolar 1.89Nm(267.65oz.in) 2.9A 57x57x76.5mm 4 Wires
Used – 80% New -53 %
Model: 23HS30-2904S-USED
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.89Nm(267.65oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2904S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holdin..
A$29.22 A$13.68
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Used – 80% New -61 %
Model: 34HS61-6004S1-USED
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41 A$45.81
Used - Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Used – 90% New -60 %
Model: 23HS45-4204S-USED
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).  Electrical Specification Manufacturer Part Number: 23HS45-4204S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$45.92 A$18.40
Used - Nema 23 Bipolar 1.8deg 1.9Nm(269.06oz.in) 2.8A 57x57x76mm 4 Wires
Used – 80% New -58 %
Model: 23HS30-2804S-USED
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$29.22 A$12.26
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Used – 80% New -59 %
Model: 17HS16-2004S1-USED
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61 A$5.92
Showing 76 to 150 of 215 (3 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments