Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Dual Shaft Nema 23 Bipolar 2.8Nm(396.51oz.in) 4.2A 57x57x113mm 4 Wires
Hot
Model: 23HS45-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS45-4204D ..
A$60.59
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS16-2804D Motor Type: Bipolar Stepp..
A$21.92
Dual Shaft Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification Manufacturer Part Number: 23HS30-2804D Motor Type: Bipolar Stepper Step Angle:..
A$38.90
Dual Shaft Nema 23 Bipolar 1.2Nm(169.9oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS22-280..
A$28.29
Dual Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2004D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$16.70
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
Hot
Model: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.61
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A, with holding torque 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-2104D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$20.88
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS19-1684D Motor..
A$16.70
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Model: 14HS14-1254H
Electrical Specification Manufacturer Part Number: 14HS14-1254H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.16Nm(22.66oz.in) Rated Current/phase: 1.25A Phase Resistance: 1.86ohms± 10% Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$23.49
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
A$16.70
Model: 11HS13-1004H
Electrical Specification Manufacturer Part Number: 11HS13-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.06Nm(8.5oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms± 10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$25.49
Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$16.70
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$18.66
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HS19-2004S1
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Model: 5-17HE19-2004S
Package includes: 5 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$46.86
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HE15-1504S
Package includes: 5 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HS19-2004S1
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
Model: 3-23HS30-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Package includes: 3 x 23HS30-2804S Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type:..
A$79.79
Model: 3-17HS15-1504S-X1
Package includes: 3 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 3-17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in). Package includes: 3 x 17HS24-2104S Electrical Specification Manufacturer Part Number: 17HS24-2104S Mo..
A$53.12
Model: 3-23HE45-4204S
Package includes: 3 x 23HE45-4204S Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$106.27
Showing 101 to 125 of 215 (9 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments