Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$16.70
Model: 11HS13-1004H
Electrical Specification Manufacturer Part Number: 11HS13-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.06Nm(8.5oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms± 10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$25.49
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
A$16.70
Model: 14HS14-1254H
Electrical Specification Manufacturer Part Number: 14HS14-1254H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.16Nm(22.66oz.in) Rated Current/phase: 1.25A Phase Resistance: 1.86ohms± 10% Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$23.49
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS19-1684D Motor..
A$16.70
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A, with holding torque 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-2104D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$20.88
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
Hot
Model: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.61
Dual Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2004D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$16.70
Dual Shaft Nema 23 Bipolar 1.2Nm(169.9oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS22-280..
A$28.29
Dual Shaft Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification Manufacturer Part Number: 23HS30-2804D Motor Type: Bipolar Stepper Step Angle:..
A$38.90
Model: 23HS16-2804D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm(77.88oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS16-2804D Motor Type: Bipolar Stepp..
A$21.92
Dual Shaft Nema 23 Bipolar 2.8Nm(396.51oz.in) 4.2A 57x57x113mm 4 Wires
Hot
Model: 23HS45-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS45-4204D ..
A$60.59
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Model: 23HS18-2004H
Electrical Specification Manufacturer Part Number: 23HS18-2004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.78Nm(110.5oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.45ohms± 10% Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificatio..
A$35.55
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 1.26Nm(178.4oz.in) 3A 57x57x56mm 8 Wires
Hot
Model: 23HS22-3008D
This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 0.9Nm(127.5oz.in) with unipolar connection and 1.26Nm(178.4oz...
A$25.04
Model: 23HS30-3006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 3.0A, with holding torque 1.35Nm(191.2oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 23HS30-3006D Motor Type: Un..
A$35.49
Model: 23HS22-1006D
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS22-1006D Motor Type: Unipolar Step..
A$25.04
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Elect..
A$63.66
Model: 34HS26-2006D
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unip..
A$50.50
Model: 42HS79-8004D
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 42HS79-8004D Step An..
A$227.23
Model: 6HS12-0304D
Electrical Specification Manufacturer Part Number: 6HS12-0304D Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.58Ncm(0.82oz.in) Rated Current/phase: 0.3A Phase Resistance: 22ohms Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$104.22
Dual Shaft Nema 8 Bipolar 4Ncm(5.7oz.in) 0.6A 20x20x38mm 4 Wires
Hot
Model: 8HS15-0604D
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 8HS15-0604D Motor Type: Bipolar Stepper Step Angle: ..
A$26.67
E Series Nema 17 Bipolar 0.9deg 30Ncm(42.48oz.in) 1.5A 42x42x38mm 4 Wires
Hot
Model: 17ME15-1504S
Electrical Specification Manufacturer Part Number: 17ME15-1504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 30Ncm(42.48oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.0ohms Inductance: 5.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$9.42
Showing 101 to 125 of 215 (9 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments