Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Product Compare0
3pcs Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Model: 3-24HS34-3504D
3pcs Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Model: 3-17HE08-1004S
3pcs E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Package includes: 3 x 17HE08-1004SElectrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$19.58
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Model: 3-23HE30-2804S
3pcs E Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Package includes: 3 x 23HE30-2804S Electrical Specification Manufacturer Part Number: 23HE30-2804S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 2.0Nm(283.22oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.17ohms± 10% Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$67.63
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Stepper Motor Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x54mm 4 Wires
Model: 3-23HE22-2804S
3pcs E Series Nema 23 Stepper Motor Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x54mm 4 Wires
Package includes: 3 x 23HE22-2804S Electrical Specification Manufacturer Part Number: 23HE22-2804S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 1.24Nm(175.6oz.in) Rated Current/phase: 2.8A Phase Resistance: 0.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$49.52
Add to Cart
Add to Wish List Compare this Product
3Pcs Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Model: 3-17HS13-0404S1
3Pcs Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
This 3pcs bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Package includes: 3 x 17HS13-0404S1 Electrica..
A$34.53
Add to Cart
Add to Wish List Compare this Product
5pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Model: 5-17HS15-1504S-X1
5pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Package includes: 5 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$63.63
Add to Cart
Add to Wish List Compare this Product
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
-35 %
Model: AU-17HS08-1004S
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification Manufacturer Part Numb..
A$16.45 A$10.69
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 11 Hollow Shaft Stepper Motor Bipolar 7.5Ncm(10.6oz.in) 1.0A 28x28x44mm
Model: 11HS18-1004H
Dual Shaft Nema 11 Hollow Shaft Stepper Motor Bipolar 7.5Ncm(10.6oz.in) 1.0A 28x28x44mm
Electrical Specification Manufacturer Part Number: 11HS18-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.075Nm(10.62oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms±10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$26.83
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 14 1.8deg 18Ncm(25.5oz.in) 0.8A 35.2x35.2x34mm 4 Wires
Model: 14HS13-0804D
Dual Shaft Nema 14 1.8deg 18Ncm(25.5oz.in) 0.8A 35.2x35.2x34mm 4 Wires
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804D Motor Type: Bipolar Stepper Step Angle: 1.8..
A$14.83
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 14 Bipolar 1.8deg 40Ncm(56.64oz.in) 1.5A 35.2x35.2x52mm 4 Wires
Model: 14HS20-1504D
Dual Shaft Nema 14 Bipolar 1.8deg 40Ncm(56.64oz.in) 1.5A 35.2x35.2x52mm 4 Wires
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504D Motor Type: Bipolar Stepper Step Angle: 1...
A$20.88
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HM19-1684D
Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 1.2A 42x42x60mm 6 Wires
Model: 17HS24-1206D
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 1.2A 42x42x60mm 6 Wires
Electrical Specification Manufacturer Part Number: 17HS24-1206D Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 65Ncm(92oz.in) Rated Current/phase: 1.2A Phase Resistance: 6.0ohms Inductance: 7.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications Fr..
A$24.32
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
Model: 17HM13-0316D
Dual Shaft Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM13-0316D Motor Type: Unipolar Stepper Step ..
A$15.14
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm(45.3oz.in) 0.4A 42x42x48mm 6 Wires
Model: 17HM19-0406D
Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm(45.3oz.in) 0.4A 42x42x48mm 6 Wires
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 32Ncm(45.3oz.in), A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM19-0406D Motor Type: Unipolar Stepper Step A..
A$18.26
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Unipolar 16Ncm(22.66oz.in) 0.95A 42x42x33mm 6 Wires
Model: 17HS13-0956D
Dual Shaft Nema 17 Unipolar 16Ncm(22.66oz.in) 0.95A 42x42x33mm 6 Wires
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0956D Motor Type: Bipolar Stepper Ste..
A$13.57
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Bipolar 1.8deg 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Model: 23HS30-2694D
Dual Shaft Nema 23 Bipolar 1.8deg 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Electrical Specification Manufacturer Part Number: 23HS30-2694D Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 1.85Nm(261.98oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.1ohms± 10% Inductance: 5.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$30.27
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Hollow Shaft Stepper Motor Bipolar 1.45Nm(205.38oz.in) 2.0A 57x57x65mm
Model: 23HS26-2004H
Dual Shaft Nema 23 Hollow Shaft Stepper Motor Bipolar 1.45Nm(205.38oz.in) 2.0A 57x57x65mm
Electrical Specification Manufacturer Part Number: 23HS26-2004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 1.45Nm(205.38oz.in) Rated Current/phase: 2.0A Phase Resistance: 2.15ohms± 10% Inductance: 6.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$40.93
Add to Cart
Add to Wish List Compare this Product
E Series Nema 17 Bipolar 42Ncm(59.48oz.in) 1.7A 42x42x37.5mm 4 Wires w/ 1m Cable & Connector
Model: 17HE15-1704S
E Series Nema 17 Bipolar 42Ncm(59.48oz.in) 1.7A 42x42x37.5mm 4 Wires w/ 1m Cable & Connector
This Nema 17 bipolar stepper motor offers a holding torque of 42Ncm(59.48oz.in) and a 1.8° step angle. Designed for stable and reliable performance, it has a rated current of 1.7A per phase. The motor comes with a 1-meter cable and a 4-pin 2.54mm pitch Harwin female connector for easy plug-and-play ..
A$8.27
Add to Cart
Add to Wish List Compare this Product
E Series Nema 17 Bipolar 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires w/ 1m Cable & Connector
Model: 17HE24-2104S1
E Series Nema 17 Bipolar 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires w/ 1m Cable & Connector
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg, a 1m cable & connector and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S1 Motor Type: B..
A$14.35
Add to Cart
Add to Wish List Compare this Product
Nema 14 Bipolar 1.8deg 18Ncm(25.49oz.in) 1.0A 35x35x34mm 4 Wires
Model: 14HS13-1004S-EGS
Nema 14 Bipolar 1.8deg 18Ncm(25.49oz.in) 1.0A 35x35x34mm 4 Wires
This is a 2-phase Nema 14 stepper motor with a 1.8° step angle. Each phase draws 1.0A and allows for holing torque of 18Ncm (25.49oz.in). It has a short shaft length of 10mm that is specifically designed to work with our EGS14 gearboxes. Electrical Specification Manufacturer Part Number: 14HS1..
A$14.48
Add to Cart
Add to Wish List Compare this Product
Nema 14 Unipolar 1.8deg 10Ncm(14.16oz.in) 0.4A 35x35x34mm 6 Wires
Model: 14HS13-0406S
Nema 14 Unipolar 1.8deg 10Ncm(14.16oz.in) 0.4A 35x35x34mm 6 Wires
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.1Nm..
A$13.57
Add to Cart
Add to Wish List Compare this Product
Nema 17 5-Phase Stepper Motor 0.5Nm(70.81oz.in) 1.8A 42x42x60mm 5 Wires
Model: 17HF24-1805S
Nema 17 5-Phase Stepper Motor 0.5Nm(70.81oz.in) 1.8A 42x42x60mm 5 Wires
This is a 5-phase stepper motor with a rated current of 1.8A and a holding torque of 0.5Nm(70.81oz.in). Compared to 2-phase stepper motors, 5-phase stepper motors have higher resolution, lower vibration, lower noise, etc. It is widely used in printing industry, medical equipment, optoelectronics ind..
A$110.02
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 0.9deg 33Ncm(46.74oz.in) 1.0A 42x42x40mm 4 Wires
Model: 17HM15-1004S
Nema 17 Bipolar 0.9deg 33Ncm(46.74oz.in) 1.0A 42x42x40mm 4 Wires
Electrical Specification Manufacturer Part Number: 17HM15-1004S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 33Ncm(46.74oz.in) Rated Current/phase: 1.0A Phase Resistance: 4.5ohms Inductance: 12.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications ..
A$16.06
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x39mm 4 Wires with A Connector
Model: 17HS15-0854S-C2
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x39mm 4 Wires with A Connector
Electrical Specification Manufacturer Part Number: 17HS15-0854S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 36Ncm(51oz.in) Rated Current/phase: 0.85A Phase Resistance: 6.3ohms Inductance: 10mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
A$11.71
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x40mm 4 Wires
Model: 17HS15-0854S-C1
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x40mm 4 Wires
This nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 0.85A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854S-C1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 36Ncm(5..
A$17.20
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 60Ncm(84.97oz.in) 2.5A 42x42x48mm 4 Wires
Model: 17HS19-2504S
Nema 17 Bipolar 1.8deg 60Ncm(84.97oz.in) 2.5A 42x42x48mm 4 Wires
This Nema 17 bipolar stepper motor features a step angle of 1.8 degrees and compact dimensions of 42x42x48mm. It is equipped with 4 wires, delivers 2.5A per phase, and provides a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2504S Motor..
A$15.92
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1600mm(63") Cable
Model: 17HS16-2004S-C4
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1600mm(63") Cable
This bipolar Nema 17 stepper motor is one of the most popular models, it has 4 wires with 1600mm(63inch) cable, each phase draws current 2.0A with torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004S-C4 Motor Type: Bipolar Stepper Step Angle: 1.8deg H..
A$12.56
Add to Cart
Add to Wish List Compare this Product
Nema 17 Hollow Shaft Stepper Motor Bipolar 0.25Nm(35.4oz.in) 1.5A 42x42x33.8mm
Model: 17HS13-1504H
Nema 17 Hollow Shaft Stepper Motor Bipolar 0.25Nm(35.4oz.in) 1.5A 42x42x33.8mm
Electrical Specification Manufacturer Part Number: 17HS13-1504H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.25Nm(35.4oz.in) Rated Current/phase: 1.5A Phase Resistance: 1.56ohms ± 10% Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificatio..
A$25.49
Add to Cart
Add to Wish List Compare this Product
Nema 17 Hollow Shaft Stepper Motor Bipolar 0.36Nm(51oz.in) 1.5A 42x42x47.75mm
Model: 17HS19-1504H
Nema 17 Hollow Shaft Stepper Motor Bipolar 0.36Nm(51oz.in) 1.5A 42x42x47.75mm
Electrical Specification Manufacturer Part Number: 17HS19-1504H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.36Nm(51oz.in) Rated Current/phase: 1.5A Phase Resistance: 1.56ohms± 10% Inductance: 1.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$28.18
Add to Cart
Add to Wish List Compare this Product
Nema 17 Unipolar 0.9deg 26Ncm(36.82oz.in) 0.4A 42x42x39mm 6 Wires
Model: 17HM15-0406S
Nema 17 Unipolar 0.9deg 26Ncm(36.82oz.in) 0.4A 42x42x39mm 6 Wires
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0406S Motor Type: Unipolar Stepper Step Angle: 0.9deg Holding Tor..
A$16.18
Add to Cart
Add to Wish List Compare this Product
Nema 17 Unipolar 1.8deg 26Ncm(36.82oz.in) 1.2A 42x42x39mm 6 Wires
Model: 17HS15-1206S
Nema 17 Unipolar 1.8deg 26Ncm(36.82oz.in) 1.2A 42x42x39mm 6 Wires
This nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 1.2A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1206S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 26Ncm(36.8..
A$14.61
Add to Cart
Add to Wish List Compare this Product
Nema 23 3-Phase Stepper Motor 1.7Nm(240.79oz.in) 5.8A 57x57x80.7mm 3 Wires w/ Timing Belt Pulley
Model: 23HT32-5803S-C1
Nema 23 3-Phase Stepper Motor 1.7Nm(240.79oz.in) 5.8A 57x57x80.7mm 3 Wires w/ Timing Belt Pulley
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.8deg 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HS30-2694S
Nema 23 Bipolar 1.8deg 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
This Nema 23 stepper CNC motor has a step angle of 1.8degrees, size of 57x57x76mm, and draws 2.8A per phase. It has 4 wires and has a holding torque of 1.85Nm(261.98oz.in).Electrical Specification Manufacturer Part Number: 23HS30-2694S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 1.8..
A$30.27
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
Model: 23HS30-2804S2
Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S2 Motor Type: Bipolar Stepper Step Angle: 1.8°..
A$29.22
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor 1.9Nm(269oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
Model: 23HS30-2804S-RV
Nema 23 Stepper Motor 1.9Nm(269oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
This motor has a torque of 1.9Nm(269oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly. Electrical Specification Manufacturer Part Number: 23HS30-2804S-RV Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 1.9Nm(269oz.in) Rated Current/pha..
A$41.68
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor 3Nm(425oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
Model: 23HS45-4204S-RV
Nema 23 Stepper Motor 3Nm(425oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
This motor has a torque of 3.0Nm(425oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly. Electrical Specification Manufacturer Part Number: 23HS45-4204S-RV Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/pha..
A$57.33
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor Bipolar 1.8deg 1.16Nm(164.3oz.in) 1.5A 57x57x56mm with 165mm Cable & Molex Connector
New -33 %
Model: 23HS22-1504S-C14
Nema 23 Stepper Motor Bipolar 1.8deg 1.16Nm(164.3oz.in) 1.5A 57x57x56mm with 165mm Cable & Molex Connector
This bipolar Nema 23 stepper motor features a 1.8° step angle and delivers a holding torque of 1.16Nm (164.3oz.in), with each phase drawing 1.5A. This motor features an additional MOLEX 39013046 connector compared to the standard 23HS22-2804S model, but the cable length is shortened to 165mm. ..
A$21.39 A$14.30
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor Bipolar 1.8deg 1.16Nm(164.3oz.in) 1.5A 57x57x56mm with 762mm Cable & Molex Connector
New -25 %
Model: 23HS22-1504S-C15
Nema 23 Stepper Motor Bipolar 1.8deg 1.16Nm(164.3oz.in) 1.5A 57x57x56mm with 762mm Cable & Molex Connector
This bipolar Nema 23 stepper motor features a 1.8° step angle and delivers a holding torque of 1.16Nm(164.3oz.in), with each phase drawing 1.5A. This motor features an additional MOLEX 39013046 connector compared to the standard 23HS22-2804S model, with a longer cable length of 762mm. Ele..
A$21.39 A$16.06
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
Hot
Model: 23HS39-5004S
Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 57x57x100mm, this 4-wire motor is ideal for precise positioning in various automation applications, offering reliable performance and robust torque out..
A$23.41
Add to Cart
Add to Wish List Compare this Product
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 57x57x54mm 6 wires
Model: 23HS21-0446S
Nema 23 unipolar 1.8deg 0.6Nm(84.97oz.in) 0.44A 57x57x54mm 6 wires
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x54mm. It has 6 wires, each phase draws 0.44A, with holding torque 0.6Nm(84.97oz.in). Electrical Specification Manufacturer Part Number: 23HS21-0446S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0..
A$25.04
Add to Cart
Add to Wish List Compare this Product
Nema 23 Unipolar 1.8deg 0.9Nm(127.5oz.in) 1A 57x57x56mm 6 Wires
Model: 23HS22-1006S
Nema 23 Unipolar 1.8deg 0.9Nm(127.5oz.in) 1A 57x57x56mm 6 Wires
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm(127.5oz.in). Electrical Specification Manufacturer Part Number: 23HS22-1006S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.9N..
A$25.04
Add to Cart
Add to Wish List Compare this Product
Nema 42 CNC Stepper Motor Bipolar 22Nm(3115.46oz.in) 7.0A 110x110x150mm 4 Wires
Model: 42HS59-7004S
Nema 42 CNC Stepper Motor Bipolar 22Nm(3115.46oz.in) 7.0A 110x110x150mm 4 Wires
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in). Electrical Specification Manufacturer Part Number: 42HS59-7004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 22Nm(3115.46oz.in) Rated Curr..
A$181.79
Add to Cart
Add to Wish List Compare this Product
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires for NMRV50 Worm Gearbox
Model: 42HS79-8004S1
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires for NMRV50 Worm Gearbox
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification Manufacturer Part Number: 42HS79-8004S1 Step Angle: 1.8deg Holdi..
A$187.02
Add to Cart
Add to Wish List Compare this Product
P Series Nema 23 1.2deg 3-phase Stepper Motor 5.5A 1Nm(141.64oz.in)
Model: 23HT22-5503S
P Series Nema 23 1.2deg 3-phase Stepper Motor 5.5A 1Nm(141.64oz.in)
Electrical Specification Manufacturer Part Number: 23HT22-5503S Number of phase: 3 Step Angle: 1.2deg Holding Torque: 1Nm(141.64oz.in) Rated Current/phase: 5.5A Phase Resistance: 0.45ohms Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame Size..
A$35.49
Add to Cart
Add to Wish List Compare this Product
P Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Model: 23HP30-2804S
P Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
This P series Nema 23 stepper motor has a rated current of 2.8A and an holding torque of 2.0Nm(283.22oz.in). It features a precise step angle of 1.8 degrees and a compact design measuring 57x57x76mm. Our upgraded version incorporates an innovative winding design to enhance torque from 1.85Nm(261.98..
A$40.54
Add to Cart
Add to Wish List Compare this Product
P Series Nema 23 Bipolar 1.8deg 2.4Nm(339.87oz.in) 4.0A 57x57x84mm 4 Wires
Model: 23HP32-4004S
P Series Nema 23 Bipolar 1.8deg 2.4Nm(339.87oz.in) 4.0A 57x57x84mm 4 Wires
This P series Nema 23 stepper motor, with a rated current of 4.0A and holding torque of 2.4Nm(339.87oz.in), features a step angle of 1.8 degrees and compact dimensions of 57x57x84mm. This series of motors is characterized by its compact size, high torque and high current capabilities, making it id..
A$40.78
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 12Nm(1699.34oz.in) 6.0A 86x86x150.6mm 4 Wires
Model: 34HP59-6004S
P Series Nema 34 Bipolar 1.8deg 12Nm(1699.34oz.in) 6.0A 86x86x150.6mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP59-6004S Number of Phase: 2 Step Angle: 1.8deg Holding Torque: 12Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.72ohms± 10% Inductance: 6.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$153.95
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 4.5Nm(637.25oz.in) 6.0A 86x86x74mm 4 Wires
Model: 34HP29-6004S
P Series Nema 34 Bipolar 1.8deg 4.5Nm(637.25oz.in) 6.0A 86x86x74mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP29-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 4.5Nm(637.25oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.34ohms± 10% Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$87.78
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 7.2Nm(1019.81oz.in) 6.0A 86x86x95.3mm 4 Wires
Model: 34HP38-6004S
P Series Nema 34 Bipolar 1.8deg 7.2Nm(1019.81oz.in) 6.0A 86x86x95.3mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP38-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 7.2Nm(1019.81oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.52ohms± 10% Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$107.41
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x112.3mm 4 Wires
Model: 34HP44-6004S
P Series Nema 34 Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x112.3mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP44-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.55ohms± 10% Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$119.57
Add to Cart
Add to Wish List Compare this Product
Round Nema 23 Bipolar 1.8deg 70Ncm(99.13oz.in) 2.8A 57x52mm 4 Wires
Model: 23HR20-2804S
Round Nema 23 Bipolar 1.8deg 70Ncm(99.13oz.in) 2.8A 57x52mm 4 Wires
This round bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x52mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.7Nm(99.13oz.in). Electrical Specification Manufacturer Part Number: 23HR20-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0..
A$30.69
Add to Cart
Add to Wish List Compare this Product
Round Pancake Nema 18 Bipolar 1.8deg 9Ncm(12.75oz.in) 1A Φ46x16mm 4 Wires
Model: 18HR06-1004S
Round Pancake Nema 18 Bipolar 1.8deg 9Ncm(12.75oz.in) 1A Φ46x16mm 4 Wires
This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16mm. It has 4 wires, each phase draws 1A, with holding torque 9Ncm(12.75oz.in). Electrical Specification Manufacturer Part Number: 18HR06-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 9..
A$32.02
Add to Cart
Add to Wish List Compare this Product
S Series Nema 24 Bipolar 1.8deg 4.2Nm(594.77oz.in) 4.2A 60x60x100mm 4 Wires
Model: 24HS40-4204S
S Series Nema 24 Bipolar 1.8deg 4.2Nm(594.77oz.in) 4.2A 60x60x100mm 4 Wires
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification Manufacturer Part Number: 24HS40-4204S Motor Type: Bipolar Stepper Step Angle:..
A$50.10
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
Model: 34HS30-6004S
S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x78mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS30-6004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$44.78
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
Model: 34HS39-6004S
S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x98mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 8.0Nm(1132.89oz.in). Electrical Specification Manufacturer Part Number: 34HS39-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque..
A$53.15
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Model: 34HS59-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HS59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$94.98
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 3.3Nm(467.32oz.in) 5.6A 86x86x64mm 4 Wires
Model: 34HS25-5604S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 3.3Nm(467.32oz.in) 5.6A 86x86x64mm 4 Wires
This stepper motor with a 30mm long shaft and a motor size of 86x86x64mm is the shortest Nema 34 motor we have. It has 4 wires, each phase draws 5.6A, with a holding torque of 3.3Nm(467.32oz.in). Electrical Specification Manufacturer Part Number: 34HS25-5604S Motor Type: Bipolar Stepper S..
A$50.88
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Model: 34HS31-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 86x86x80mm. It has 4 wires, each phase draws 6.0A, with holding torque 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in)..
A$55.84
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.45oz.in) 6.0A 86x86x113mm 4 Wires
Model: 34HS45-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.45oz.in) 6.0A 86x86x113mm 4 Wires
This NEMA 34 stepper motor features a 1.8-degree step angle, a holding torque of 8.2Nm(849.84oz.in), and draws 6.0A per phase. It comes equipped with a 37mm keyway shaft and 500mm cables. This motor offers a combination of high torque and low inertia. Built for durability and reliable performance..
A$71.49
Add to Cart
Add to Wish List Compare this Product
Short Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.7A 28x28x51mm 4 Wires
Model: 11HS20-0704S
Short Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.7A 28x28x51mm 4 Wires
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x51mm. It has 4 wires and holding torque 12Ncm(16.99oz.in). It is intended for use with Nema 11 EG series planetary gearboxes. Electrical Specification Manufacturer Part Number: 11HS20-0704S ..
A$18.42
Add to Cart
Add to Wish List Compare this Product
Short Shaft Nema 17 Bipolar 36Ncm(51oz.in) 1.58A 42x42x39mm 4 Wires
Model: 17HS15-1584S
Short Shaft Nema 17 Bipolar 36Ncm(51oz.in) 1.58A 42x42x39mm 4 Wires
This short shaft Nema 17 stepper motor with 9.5mm length shaft, motor size is 42x42x39mm. It has 4 wires, each phase draws current 1.58A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1584S Motor Type: Bipolar Stepper Step Angle: 1.8deg Hold..
A$13.57
Add to Cart
Add to Wish List Compare this Product
Short Shaft Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.9A 57x57x76.5mm 4 Wires
Model: 23HS30-2904S
Short Shaft Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.9A 57x57x76.5mm 4 Wires
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.9Nm(269.06oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2904S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding..
A$29.22
Add to Cart
Add to Wish List Compare this Product
Used - Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires w/ 0.085m Cable
Used – 80% New -51 %
Model: 17HM19-1684D-USED
Used - Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires w/ 0.085m Cable
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94 A$9.25
Add to Cart
Add to Wish List Compare this Product
Used - Nema 16 Bipolar 0.9deg 12Ncm(16.99oz.in) 0.63A 39x39x31mm 4 Wires
Used – 80% New -45 %
Model: 16HM12-0634D-USED
Used - Nema 16 Bipolar 0.9deg 12Ncm(16.99oz.in) 0.63A 39x39x31mm 4 Wires
This bipolar Nema 16 stepper motor features a compact size of 39.2x39.2x31mm, a step angle of 0.9°, and a 4-wire configuration, with each phase drawing 0.63A. It delivers a robust holding torque of 12Ncm(16.99oz.in), making it ideal for precision motion control applications such as 3D printers, ro..
A$18.82 A$10.35
Add to Cart
Add to Wish List Compare this Product
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x40mm 4 Wires w/ 1m Pin Connector
Used – 95% New -59 %
Model: 17HS15-1504S-X1-USED
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x40mm 4 Wires w/ 1m Pin Connector
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$14.61 A$5.92
Add to Cart
Add to Wish List Compare this Product
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Used – 80% New -59 %
Model: 17HS16-2004S1-USED
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61 A$5.92
Add to Cart
Add to Wish List Compare this Product
Used - Nema 23 Bipolar 1.8deg 1.9Nm(269.06oz.in) 2.8A 57x57x76mm 4 Wires
Used – 80% New -58 %
Model: 23HS30-2804S-USED
Used - Nema 23 Bipolar 1.8deg 1.9Nm(269.06oz.in) 2.8A 57x57x76mm 4 Wires
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$29.22 A$12.26
Add to Cart
Add to Wish List Compare this Product
Used - Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Used – 90% New -60 %
Model: 23HS45-4204S-USED
Used - Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).  Electrical Specification Manufacturer Part Number: 23HS45-4204S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$45.92 A$18.40
Add to Cart
Add to Wish List Compare this Product
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Used – 80% New -61 %
Model: 34HS61-6004S1-USED
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41 A$45.81
Add to Cart
Add to Wish List Compare this Product
Used - Short Shaft Nema 23 Bipolar 1.89Nm(267.65oz.in) 2.9A 57x57x76.5mm 4 Wires
Used – 80% New -53 %
Model: 23HS30-2904S-USED
Used - Short Shaft Nema 23 Bipolar 1.89Nm(267.65oz.in) 2.9A 57x57x76.5mm 4 Wires
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.89Nm(267.65oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2904S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holdin..
A$29.22 A$13.68
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
Hot
Model: 23HS33-4008D
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
This nema 23 stepper motor with step angle 1.8deg, a holding torque(bipolar) of 2.83Nm(400oz.in), a holding torque(unipolar) of 2.0Nm(283oz.in) and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you w..
A$42.85
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404D
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0404D Motor Type: Bipolar Stepper Step A..
A$14.00
Add to Cart
Add to Wish List Compare this Product
Nema 17 Unipolar 1.8deg 65Ncm(92oz.in) 1.2A 42x42x60mm 6 Wires
Model: 17HS24-1206S
Nema 17 Unipolar 1.8deg 65Ncm(92oz.in) 1.2A 42x42x60mm 6 Wires
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 1.2A, with holding torque up to 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-1206S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 6..
A$23.78
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76.5mm 4 Wires Φ6mm Shaft
Hot
Model: 23HS30-2804S1
Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76.5mm 4 Wires Φ6mm Shaft
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.85Nm(261.98oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S1 Motor Type: Bipolar Stepper Step ..
A$35.49
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 8 Hollow Shaft Stepper Motor Bipolar 1.5Ncm(2.12oz.in) 0.49A 20x20x27mm
Model: 8HS12-0494H
Dual Shaft Nema 8 Hollow Shaft Stepper Motor Bipolar 1.5Ncm(2.12oz.in) 0.49A 20x20x27mm
Electrical Specification Manufacturer Part Number: 8HS12-0494H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.015Nm(2.12oz.in) Rated Current/phase: 0.49A Phase Resistance: 6.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$32.88
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 40Ncm(56.64oz.in) 0.4A 42x42x39mm 4 Wires
Hot
Model: 17HS15-0404S
Nema 17 Bipolar 1.8deg 40Ncm(56.64oz.in) 0.4A 42x42x39mm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.4A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
A$15.68
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS16-2004S1
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 13Ncm(18.41oz.in) 0.7A 42x42x25mm 4 Wires
Hot
Model: 17HS10-0704S
Nema 17 Bipolar 1.8deg 13Ncm(18.41oz.in) 0.7A 42x42x25mm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 13Ncm(18.41oz.in). Electrical Specification Manufacturer Part Number: 17HS10-0704S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.04
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 0.9deg 11Ncm(15.58oz.in) 1.2A 42x42x22mm 4 Wires
Hot
Model: 17HM08-1204S
Nema 17 Bipolar 0.9deg 11Ncm(15.58oz.in) 1.2A 42x42x22mm 4 Wires
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x22mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 17HM08-1204S Motor Type: Bipolar StepperStep Angle: 0.9deg Holding Torque:..
A$14.61
Add to Cart
Add to Wish List Compare this Product
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
Hot
Model: 14HS13-0804S
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18Ncm..
A$13.57
Add to Cart
Add to Wish List Compare this Product
Nema 8 Bipolar 1.8deg 1.4Ncm(1.98oz.in) 0.2A 20x20x27.3mm 4 Wires
Hot
Model: 8HS11-0204S
Nema 8 Bipolar 1.8deg 1.4Ncm(1.98oz.in) 0.2A 20x20x27.3mm 4 Wires
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in). Electrical Specification Manufacturer Part Number: 8HS11-0204S Motor Type: Bipolar Stepper Step..
A$25.57
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS19-2004S1
Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in) . Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC an..
A$15.39
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804S
Nema 23 Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x56mm 4 Wires
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.24Nm(175.6oz.in). Electrical Specification Manufacturer Part Number: 23HS22-2804S Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$21.39
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76.5mm 4 Wires
Hot
Model: 23HS30-2804S
Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76.5mm 4 Wires
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76.5mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg..
A$29.22
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar Stepper Motor 1.8deg 16Ncm(22.66oz.in) 1A Extruder Motor 42x42x21.5mm 4 Wires
Hot
Model: 17HS08-1004S
Nema 17 Bipolar Stepper Motor 1.8deg 16Ncm(22.66oz.in) 1A Extruder Motor 42x42x21.5mm 4 Wires
This is the shortest bipolar Nema 17 stepper motor we have, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x21.5mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification M..
A$12.78
Add to Cart
Add to Wish List Compare this Product
Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404S1
Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
This bipolar Nema 17 stepper motor is one of the most popular model, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification ..
A$13.57
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Model: 3-17HE15-1504S
3pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Package includes: 3 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$20.85
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HE19-2004S
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Package includes: 3 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$28.13
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Stepper Motor 1.8deg 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires
Model: 3-17HE24-2104S
3pcs E Series Nema 17 Stepper Motor 1.8deg 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Package includes: 3 x 17HE24-2104S Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor ..
A$43.06
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Bipolar 1.8deg 3.0Nm(425oz.in) 4.2A 57x57x113mm 4 Wires
Model: 3-23HE45-4204S
3pcs E Series Nema 23 Bipolar 1.8deg 3.0Nm(425oz.in) 4.2A 57x57x113mm 4 Wires
Package includes: 3 x 23HE45-4204S Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$106.27
Add to Cart
Add to Wish List Compare this Product
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 3-17HS24-2104S
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in). Package includes: 3 x 17HS24-2104S Electrical Specification Manufacturer Part Number: 17HS24-2104S Mo..
A$53.12
Add to Cart
Add to Wish List Compare this Product
3pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Model: 3-17HS15-1504S-X1
3pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Package includes: 3 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
Add to Cart
Add to Wish List Compare this Product
3pcs Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Model: 3-23HS30-2804S
3pcs Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Package includes: 3 x 23HS30-2804S Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type:..
A$79.79
Add to Cart
Add to Wish List Compare this Product
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HS19-2004S1
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
Add to Cart
Add to Wish List Compare this Product
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HE15-1504S
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Package includes: 5 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
Add to Cart
Add to Wish List Compare this Product
5pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Model: 5-17HE19-2004S
5pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Package includes: 5 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$46.86
Add to Cart
Add to Wish List Compare this Product
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HS19-2004S1
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Add to Cart
Add to Wish List Compare this Product
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674D
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$18.66
Add to Cart
Add to Wish List Compare this Product
Showing 1 to 100 of 215 (3 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments