Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS59-5004D Moto..
A$127.17
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
Model: 34HP59-6004S
Electrical Specification Manufacturer Part Number: 34HP59-6004S Number of Phase: 2 Step Angle: 1.8deg Holding Torque: 12Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.72ohms± 10% Inductance: 6.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$153.95
Model: 42HS59-7004S
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in). Electrical Specification Manufacturer Part Number: 42HS59-7004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 22Nm(3115.46oz.in) Rated Curr..
A$181.79
Model: 42HS79-8004S1
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification Manufacturer Part Number: 42HS79-8004S1 Step Angle: 1.8deg Holdi..
A$187.02
Model: 42HS79-8004D
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 42HS79-8004D Step An..
A$227.23
Model: 42HS79-8004S
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8.0A, allowing for a huge torque up to 30Nm(4248oz.in). Electrical Specification Manufacturer Part Number: 42HS79-8004S Step Angle: 1.8deg Holding Torque: 30Nm(4248oz.in) Rated C..
A$227.23
Showing 209 to 215 of 215 (27 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments