Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x40mm 4 Wires w/ 1m Pin Connector
Used – 95% New -59 %
Model: 17HS15-1504S-X1-USED
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$14.61 A$5.92
Used - Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Used – 80% New -59 %
Model: 17HS16-2004S1-USED
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61 A$5.92
E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Hot
Model: 17HE08-1004S
Electrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.09
E Series Nema 17 Bipolar 26Ncm(36.82oz.in) 1.2A 42X42x30mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE12-1204S
Electrical Specification Manufacturer Part Number: 17HE12-1204S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 26Ncm(36.82oz.in) Rated Current/phase: 1.2A Phase Resistance: 2.5ohms Inductance: 3.3mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$7.26
E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE15-1504S
Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$7.55
Model: 17HE15-1704S
This Nema 17 bipolar stepper motor offers a holding torque of 42Ncm(59.48oz.in) and a 1.8° step angle. Designed for stable and reliable performance, it has a rated current of 1.7A per phase. The motor comes with a 1-meter cable and a 4-pin 2.54mm pitch Harwin female connector for easy plug-and-play ..
A$8.27
Used - Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires w/ 0.085m Cable
Used – 80% New -51 %
Model: 17HM19-1684D-USED
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94 A$9.25
E Series Nema 17 Bipolar 0.9deg 30Ncm(42.48oz.in) 1.5A 42x42x38mm 4 Wires
Hot
Model: 17ME15-1504S
Electrical Specification Manufacturer Part Number: 17ME15-1504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 30Ncm(42.48oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.0ohms Inductance: 5.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$9.42
E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HE19-2004S
Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$10.18
Used - Nema 16 Bipolar 0.9deg 12Ncm(16.99oz.in) 0.63A 39x39x31mm 4 Wires
Used – 80% New -45 %
Model: 16HM12-0634D-USED
This bipolar Nema 16 stepper motor features a compact size of 39.2x39.2x31mm, a step angle of 0.9°, and a 4-wire configuration, with each phase drawing 0.63A. It delivers a robust holding torque of 12Ncm(16.99oz.in), making it ideal for precision motion control applications such as 3D printers, ro..
A$18.82 A$10.35
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification Manufacturer Part Numb..
A$16.45 A$10.69
Model: 17HS15-0854S-C2
Electrical Specification Manufacturer Part Number: 17HS15-0854S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 36Ncm(51oz.in) Rated Current/phase: 0.85A Phase Resistance: 6.3ohms Inductance: 10mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
A$11.71
Model: 16HS16-0304S-C1
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS16-0304S-C1 Motor Type: Bipolar Stepper Step Angle: 1..
A$11.97
Used - Nema 23 Bipolar 1.8deg 1.9Nm(269.06oz.in) 2.8A 57x57x76mm 4 Wires
Used – 80% New -58 %
Model: 23HS30-2804S-USED
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm(269.06oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$29.22 A$12.26
Model: 17HS16-2004S-C4
This bipolar Nema 17 stepper motor is one of the most popular models, it has 4 wires with 1600mm(63inch) cable, each phase draws current 2.0A with torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004S-C4 Motor Type: Bipolar Stepper Step Angle: 1.8deg H..
A$12.56
Nema 17 Bipolar Stepper Motor 1.8deg 16Ncm(22.66oz.in) 1A Extruder Motor 42x42x21.5mm 4 Wires
Hot
Model: 17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor we have, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x21.5mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification M..
A$12.78
Model: 16HS08-0604S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 4 wires, each phase draws 0.6A, with holding torque 8.0Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS08-0604S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 8.0..
A$13.04
Model: 16HS08-0506S
This unipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 6 wires, each phase draws 0.5A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS08-0506S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 8Nc..
A$13.04
Nema 17 Bipolar 1.8deg 13Ncm(18.41oz.in) 0.7A 42x42x25mm 4 Wires
Hot
Model: 17HS10-0704S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 13Ncm(18.41oz.in). Electrical Specification Manufacturer Part Number: 17HS10-0704S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.04
Model: 14RE07-1004VRN
Electrical Specification Manufacturer Part Number: 14RE07-1004VRN Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 8Ncm(11.33oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.9ohms Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fr..
A$13.26
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Model: 17HS13-0956D
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0956D Motor Type: Bipolar Stepper Ste..
A$13.57
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
Hot
Model: 14HS13-0804S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18Ncm..
A$13.57
Model: 14HS13-0406S
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.1Nm..
A$13.57
Model: 16HS13-0654S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 16HS13-0654S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18..
A$13.57
Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404S1
This bipolar Nema 17 stepper motor is one of the most popular model, with a step angle of 1.8deg, a shaft diameter of Φ5mm and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification ..
A$13.57
Model: 17HS13-0316S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0316S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding T..
A$13.57
Model: 17HS13-0956S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.95A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0956S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding T..
A$13.57
Model: 17HS15-1584S
This short shaft Nema 17 stepper motor with 9.5mm length shaft, motor size is 42x42x39mm. It has 4 wires, each phase draws current 1.58A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1584S Motor Type: Bipolar Stepper Step Angle: 1.8deg Hold..
A$13.57
Used - Short Shaft Nema 23 Bipolar 1.89Nm(267.65oz.in) 2.9A 57x57x76.5mm 4 Wires
Used – 80% New -53 %
Model: 23HS30-2904S-USED
This short shaft Nema 23 stepper motor with 13.5mm length shaft, motor size 57x57x76.5mm. It has 4 wires, each phase draws 2.9A, with holding torque 1.89Nm(267.65oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2904S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holdin..
A$29.22 A$13.68
Nema 17 Bipolar 1.8deg 22Ncm(31.15oz.in) 1.33A 42x42x34mm 4 Wires
Hot
Model: 17HS13-1334S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). Electrical Specification Manufacturer Part Number: 17HS13-1334S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torq..
A$13.95
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0404D Motor Type: Bipolar Stepper Step A..
A$14.00
Nema 23 Stepper Motor Bipolar 1.8deg 1.16Nm(164.3oz.in) 1.5A 57x57x56mm with 165mm Cable & Molex Connector
New -33 %
Model: 23HS22-1504S-C14
This bipolar Nema 23 stepper motor features a 1.8° step angle and delivers a holding torque of 1.16Nm (164.3oz.in), with each phase drawing 1.5A. This motor features an additional MOLEX 39013046 connector compared to the standard 23HS22-2804S model, but the cable length is shortened to 165mm. ..
A$21.39 A$14.30
Model: 17HE24-2104S1
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg, a 1m cable & connector and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S1 Motor Type: B..
A$14.35
Model: 17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.35
Model: 14HS13-1004S-EGS
This is a 2-phase Nema 14 stepper motor with a 1.8° step angle. Each phase draws 1.0A and allows for holing torque of 18Ncm (25.49oz.in). It has a short shaft length of 10mm that is specifically designed to work with our EGS14 gearboxes. Electrical Specification Manufacturer Part Number: 14HS1..
A$14.48
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
Hot
Model: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.61
Nema 14 Bipolar 1.8deg 14Ncm(20oz.in) 0.4A 35x35x26mm 4 Wires
Hot
Model: 14HS10-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A, with holding torque 14Ncm(20oz.in). Electrical Specification Manufacturer Part Number: 14HS10-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 14Ncm(2..
A$14.61
Nema 14 Bipolar 1.8deg 5Ncm(7.08oz.in) 0.4A 35x35x20mm 4 Wires
Hot
Model: 14HS08-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HS08-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 5Ncm(7..
A$14.61
Model: 16HM09-1204S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x22mm. It has 4 wires, each phase draws 1.2 A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 16HM09-1204S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 11Nc..
A$14.61
Model: 16HM10-0604S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x25mm. It has 4 wires, each phase draws 0.6A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 16HM10-0604S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 16Ncm..
A$14.61
Nema 17 Bipolar 0.9deg 11Ncm(15.58oz.in) 1.2A 42x42x22mm 4 Wires
Hot
Model: 17HM08-1204S
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x22mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 17HM08-1204S Motor Type: Bipolar StepperStep Angle: 0.9deg Holding Torque:..
A$14.61
Nema 17 Bipolar 1.8deg 36Ncm(51oz.in) 0.85A 42x42x39mm 4 Wires
Hot
Model: 17HS15-0854S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.85A, with holding torque 36Ncm(51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: ..
A$14.61
Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS15-1504S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.50A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1504S1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$14.61
Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x40mm 4 Wires w/ 1m Pin Connector
Hot
Model: 17HS15-1504S-X1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$14.61
Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 17HS16-2004S1
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock an..
A$14.61
Nema 17 Unipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x40mm 6 Wires
Hot
Model: 17HS15-0406S
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 6 wires, each phase draws 0.4A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 26Nc..
A$14.61
Model: 17HS15-1206S
This nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 1.2A, with holding torque 26Ncm(36.82oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1206S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 26Ncm(36.8..
A$14.61
Model: 14HS13-0804D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804D Motor Type: Bipolar Stepper Step Angle: 1.8..
A$14.83
Showing 1 to 50 of 215 (5 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments