Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Dual Shaft Nema 23 Bipolar 1.85Nm(261.98oz.in) 2.8A 57x57x76mm 4 Wires
Hot
Model: 23HS30-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used for brakes, encoder and hand wheels.Electrical Specification Manufacturer Part Number: 23HS30-2804D Motor Type: Bipolar Stepper Step Angle:..
A$38.90
Dual Shaft Nema 23 Bipolar 1.2Nm(169.9oz.in) 2.8A 57x57x56mm 4 Wires
Hot
Model: 23HS22-2804D
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 1.2Nm(169.9oz.in), and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS22-280..
A$28.29
Model: 17HS13-0956D
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0956D Motor Type: Bipolar Stepper Ste..
A$13.57
Model: 17HM19-0406D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A, with holding torque 32Ncm(45.3oz.in), A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM19-0406D Motor Type: Unipolar Stepper Step A..
A$18.26
Model: 17HM13-0316D
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A, with holding torque 16Ncm(22.66oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM13-0316D Motor Type: Unipolar Stepper Step ..
A$15.14
Dual Shaft Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires
Hot
Model: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A, with holding torque 59Ncm(83.55oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2004D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$16.70
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
Hot
Model: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A, with holding torque 45Ncm(63.74oz.in). Electrical Specification Manufacturer Part Number: 17HS16-2004D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$14.61
Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A, with holding torque 65Ncm(92oz.in). Electrical Specification Manufacturer Part Number: 17HS24-2104D Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$20.88
Model: 17HS24-1206D
Electrical Specification Manufacturer Part Number: 17HS24-1206D Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 65Ncm(92oz.in) Rated Current/phase: 1.2A Phase Resistance: 6.0ohms Inductance: 7.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specifications Fr..
A$24.32
Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HS19-1684D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). It's very good choice for 3D printer, a rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS19-1684D Motor..
A$16.70
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Hot
Model: 17HS13-0404D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-0404D Motor Type: Bipolar Stepper Step A..
A$14.00
Model: 17HS13-1334D
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm(31.15oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS13-1334D Motor Type: Bipolar Stepper Step An..
A$13.57
Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm(62.3oz.in) 1.68A 42x42x48mm 4 Wires
Hot
Model: 17HM19-1684D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm(62.3oz.in). Electrical Specification Manufacturer Part Number: 17HM19-1684D Motor Type: Bipolar Stepper Step Angle: 0.9deg..
A$18.94
Model: 14HS14-1254H
Electrical Specification Manufacturer Part Number: 14HS14-1254H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.16Nm(22.66oz.in) Rated Current/phase: 1.25A Phase Resistance: 1.86ohms± 10% Inductance: 2.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specificati..
A$23.49
Model: 14HS20-1504D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504D Motor Type: Bipolar Stepper Step Angle: 1...
A$20.88
Model: 14HS13-0804D
This model is dual shaft Nema 14 Bipolar stepper motor,it with step angle 1.8deg and size 35.2x35.2x34mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804D Motor Type: Bipolar Stepper Step Angle: 1.8..
A$14.83
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar ..
A$16.70
Model: 11HS18-1004H
Electrical Specification Manufacturer Part Number: 11HS18-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.075Nm(10.62oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms±10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$26.83
Model: 11HS13-1004H
Electrical Specification Manufacturer Part Number: 11HS13-1004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.06Nm(8.5oz.in) Rated Current/phase: 1.0A Phase Resistance: 2.1ohms± 10% Inductance: 1.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$25.49
Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$16.70
Dual Shaft Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8de..
A$18.66
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
-35 %
Model: AU-17HS08-1004S
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification Manufacturer Part Numb..
A$16.45 A$10.69
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HS19-2004S1
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Model: 5-17HS15-1504S-X1
Package includes: 5 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$63.63
Showing 176 to 200 of 215 (9 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments