Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS31-5504D M..
A$51.84
Model: 34HS46-5004D1
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS46-5004D1 Mo..
A$52.18
Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS59-5004D Moto..
A$127.17
Model: 34HS38-4204D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 6.8Nm(962.96oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS38-4204D M..
A$55.02
Nema 11 Bipolar 1.8deg 10Ncm(14.16oz.in) 0.67A 28x28x45mm 4 Wires
Hot
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A, with holding torque 10Ncm(14.16oz.in). Electrical Specification Manufacturer Part Number: 11HS18-0674S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 10N..
A$16.70
Nema 11 Bipolar 1.8deg 12Ncm(16.99oz.in) 0.67A 28x28x51mm 4 Wires
Hot
Model: 11HS20-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A, with holding torque 12Ncm(16.99oz.in). Planetary Gearbox is available for this model. Electrical Specification Manufacturer Part Number: 11HS20-0674S Motor Type: Bipolar Step..
A$17.22
Nema 11 Bipolar 1.8deg 7Ncm(9.91oz.in) 0.67A 28x28x33mm 4 Wires
Hot
Model: 11HS12-0674S
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x33mm. It has 4 wires, each phase draws 0.67A, with holding torque 7Ncm(9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: ..
A$15.65
Nema 14 Bipolar 0.9deg 11Ncm(15.58oz.in) 0.4A 35x35x28.2mm 4 Wires
Hot
Model: 14HM11-0404S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x28.2mm. It has 4 wires, each phase draws 0.4A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 14HM11-0404S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 11..
A$17.95
Nema 14 Bipolar 0.9deg 5Ncm(7.08oz.in) 0.5A 35x35x20mm 4 Wires
Hot
Model: 14HM08-0504S
This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HM08-0504S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 5Ncm(7...
A$16.18
Nema 14 Bipolar 1.8deg 12.5Ncm(17.7oz.in) 1.0A 35x35x28mm 4 Wires
Hot
Model: 14HS11-1004S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x28mm. It has 4 wires, each phase draws 1 A, with holding torque 12.5Ncm(17.7oz.in). Electrical Specification Manufacturer Part Number: 14HS11-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 12.5Nc..
A$16.21
Nema 14 Bipolar 1.8deg 14Ncm(20oz.in) 0.4A 35x35x26mm 4 Wires
Hot
Model: 14HS10-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A, with holding torque 14Ncm(20oz.in). Electrical Specification Manufacturer Part Number: 14HS10-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 14Ncm(2..
A$14.61
Model: 14HS13-1004S-EGS
This is a 2-phase Nema 14 stepper motor with a 1.8° step angle. Each phase draws 1.0A and allows for holing torque of 18Ncm (25.49oz.in). It has a short shaft length of 10mm that is specifically designed to work with our EGS14 gearboxes. Electrical Specification Manufacturer Part Number: 14HS1..
A$14.48
Nema 14 Bipolar 1.8deg 18Ncm(25.5oz.in) 0.8A 35x35x34.8mm 4 Wires
Hot
Model: 14HS13-0804S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34.8mm. It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18Ncm..
A$13.57
Nema 14 Bipolar 1.8deg 23Ncm(32.57oz.in) 0.5A 35x35x42mm 4 Wires
Hot
Model: 14HS17-0504S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x42mm. It has 4 wires, each phase draws 0.5A, with holding torque 23Ncm(32.57oz.in). Electrical Specification Manufacturer Part Number: 14HS17-0504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 23Nc..
A$16.70
Nema 14 Bipolar 1.8deg 40Ncm(56.64oz.in) 1.5A 35x35x52mm 4 Wires
Hot
Model: 14HS20-1504S
This Nema 14 stepper motor is the strongest model in Nema 14 size motors, it with step angle 1.8deg and size 35x35x52mm. It has 4 wires, each phase draws 1.5A, with holding torque 40Ncm(56.64oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504S Motor Type: Bipolar Stepper S..
A$23.15
Nema 14 Bipolar 1.8deg 5Ncm(7.08oz.in) 0.4A 35x35x20mm 4 Wires
Hot
Model: 14HS08-0404S
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x20mm. It has 4 wires, each phase draws 0.4A, with holding torque 5Ncm(7.08oz.in). Electrical Specification Manufacturer Part Number: 14HS08-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 5Ncm(7..
A$14.61
Model: 14HS13-0804SH
This bipolar Nema 14 stepper motor with a hollow shaft. The shaft with 5mm OD and 3mm ID, It has 4 wires, each phase draws 0.8A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804SH Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Tor..
A$19.46
Model: 14HS19-2004H
Electrical Specification Manufacturer Part Number: 14HS19-2004H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.33Nm(46.74oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.4ohms±10% Inductance: 2.41mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$34.21
Model: 14HS13-0406S
This unipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 6 wires, each phase draws 0.4A, with holding torque 10Ncm(14.2oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0406S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 0.1Nm..
A$13.57
Model: 16HS16-0304S-C1
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with holding torque 8Ncm(11.33oz.in). Electrical Specification Manufacturer Part Number: 16HS16-0304S-C1 Motor Type: Bipolar Stepper Step Angle: 1..
A$11.97
Model: 16HM09-1204S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x22mm. It has 4 wires, each phase draws 1.2 A, with holding torque 11Ncm(15.58oz.in). Electrical Specification Manufacturer Part Number: 16HM09-1204S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 11Nc..
A$14.61
Model: 16HM10-0604S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x25mm. It has 4 wires, each phase draws 0.6A, with holding torque 16Ncm(22.66oz.in). Electrical Specification Manufacturer Part Number: 16HM10-0604S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 16Ncm..
A$14.61
Model: 16HM13-0404S
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 16HM13-0404S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 18Ncm(..
A$15.14
Model: 16HS13-0654S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A, with holding torque 18Ncm(25.5oz.in). Electrical Specification Manufacturer Part Number: 16HS13-0654S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 18..
A$13.57
Nema 16 Bipolar 1.8deg 21Ncm(29.74oz.in) 0.4A 39x39x34mm 4 Wires
Hot
Model: 16HS13-0404S
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A, with holding torque 21Ncm(29.74oz.in). Electrical Specification Manufacturer Part Number: 16HS13-0404S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 21Nc..
A$16.70
Showing 76 to 100 of 215 (9 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments